Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 217
CURRENT
2018-01-12
Standard
AMS2819C
This specification covers the procedures for identification and marking of bare welding wire by a color code system and marking of spools.
2018-01-09
WIP Standard
J461_201801
Factors influencing the uses of wrought copper and copper alloys concern electrical conductivity, thermal conductivity, machinability, formability, fatigue characteristics, strength, corrosion resistance, the ease with which alloys can be joined, and the fact that these materials are nonmagnetic. Copper and its alloy also have a wide range of rich, pleasing colors. The only other metal with such distinctive coloring is gold. These materials are all easily finished by buffing, scratch brushing, plating or chemically coloring, or clear protective coating systems. When it is desired to improve one or more of the important properties of copper, alloying often solves the problem. A wide range of alloys, therefore, has been developed and commercially employed, such as the high copper alloys, brasses, leaded brasses, tin bronzes, heat treatable alloys, copper-nickel alloys, nickel silvers, and special bronzes. nickel silvers, and special bronzes.
CURRENT
2018-01-09
Standard
J1147_201801
The Joint AWS/SAE Committee on Automotive Welding was organized on January 16, 1974, for the primary purpose of facilitating the development and publication of various documents related to the selection, specification, testing, and use of welding materials and practices, particularly for the automotive and related industries. A secondary purpose is the dissemination of technical information.
CURRENT
2017-12-05
Standard
AMS6466G
This specification covers a corrosion-resistant steel in the form of welding wire.
CURRENT
2017-11-30
Standard
AMS6457E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-11-21
Standard
AMS6501E
This specification covers a maraging steel in the form of welding wire.
CURRENT
2017-11-15
Standard
AMS4954K
This specification covers a titanium alloy in the form of wire for welding filler metal.
CURRENT
2017-10-20
Standard
AMS5031G
This specification covers a low-carbon steel in the form of covered welding electrodes.
CURRENT
2017-10-13
Standard
AMS6456E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-10-12
Standard
J2613_201710
This SAE Standard covers sub-critically annealed or normalized electric resistance welded flash controlled single-wall high strength steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J1065 for inch tubing. This specification also covers SAE J2613 Type-A tubing. The mechanical properties and performance requirements of standard SAE J2613 and SAE J2613 Type-A are the same. The designated differences of Type-A tubing do not imply that Type-A tubing is in anyway inferior to standard SAE J2613.
2017-09-22
WIP Standard
AMS4937E
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
CURRENT
2017-09-22
Standard
AMS2685F
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) methods.
CURRENT
2017-09-19
Standard
AMS2690D
This specification defines the equipment, procedures, and requirements for joining leads by parallel gap resistance welding.
CURRENT
2017-08-15
Standard
ARP1876C
This SAE Aerospace Recommended Practice defines a method for determining the weldability of weld filler metal in continuous coil or cut length form. It is applicable to all solid (non flux-containing) wires. It is intended as a referee method for testing weld filler metals in case of dispute between purchaser and vendor.
CURRENT
2017-08-11
Standard
AS70003-1
No Scope available.
CURRENT
2017-08-02
Standard
AMS6465E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-06-05
Standard
AMS5802E
This specification covers a corrosion and heat-resistant iron-nickel alloy in the form of welding wire.
CURRENT
2017-04-07
Standard
AMS4750E
This specification covers a tin-lead solder in the form of wire, strip, bars, and pigs.
CURRENT
2017-04-03
Standard
AMS5691H
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes. Primarily for shielded-metal-arc welding of parts fabricated from steels of similar composition, particularly when the weld zone is required to have strength and corrosion-resistance comparable to those of the parent metal.
CURRENT
2017-04-03
Standard
AMS5683G
This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.
CURRENT
2017-03-23
Standard
AMS5824F
This specification covers a corrosion-resistant steel in the form of welding wire.
CURRENT
2017-01-04
Standard
AMS4245F
This specification covers an aluminum alloy in the form of welding wire.
CURRENT
2016-10-31
Standard
AMS6461L
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2016-10-26
Standard
AMS6462K
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2016-10-26
Standard
AMS6469E
This specification covers a low-alloy steel in the form of welding wire.
2016-09-14
WIP Standard
AMS2814H
This specification covers spooling and packaging of bare welding wire to ensure cleanliness and freedom from corrosion, spool sizes and weights of spooled wire, and package weights of cut lengths.
2016-09-14
WIP Standard
AMS2813H
This specification covers spooling and packaging of bare welding wire to ensure cleanliness but with minimum environmental protection, spool sizes and weights of spooled wire, and package weights of cut lengths.
2016-09-14
WIP Standard
ARP4926C
This SAE Aerospace Recommended Practice (ARP) covers procedures for welding wire verification and conformance to specification composition.
CURRENT
2016-08-01
Standard
AMS2689B
This specification defines the procedures and requirements for fusion welding titanium and titanium alloys and the properties of such weldments.
CURRENT
2016-06-16
Standard
AMS4955H
This specification covers a titanium alloy in the form of welding wire.
Viewing 1 to 30 of 217

Filter

  • Standard
    217