Criteria

Text:
Display:

Results

Viewing 1 to 30 of 51
2015-12-11 ...
  • December 11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The vehicle-terrain interaction in an off-road environment creates unique challenges for designers of both wheeled and tracked off-road vehicles. Not only should vehicle designers have a working knowledge of the fundamentals of on-road vehicle dynamics, they should also have the specialized knowledge of the vehicle dynamic characteristics found in construction, agriculture, and military off-road vehicles. This one-day seminar concentrates on the basics of off-highway trucks and the differences with their on-highway counterparts.
2015-12-08 ...
  • December 8-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Understanding vehicle dynamics is one of the critical issues in the design of all vehicles, including heavy trucks. This seminar provides a comprehensive introduction to the fundamentals of heavy truck dynamics. It covers all of the critical subsystems that must be considered by designers and decision makers in determining the effect of various components on heavy truck dynamics. This seminar begins where the tires meet the ground, progressing up through the various components and bringing together the theory and practice of heavy truck dynamics.
2015-11-16 ...
  • November 16-18, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Internal audits are a requirement of the AS9100 Rev C standard and one of the fundamental requirements of the internal audit program is to verify the compliance of the organization’s quality management system to the AS9100 standard. Internal auditors must be knowledgeable of these requirements and the expectations as identified in the standard. In addition, the requirements of AS9101Rev D have significantly changed the way audits are expected to be performed in the Aviation, Space and Defense industries.
2015-11-05 ...
  • November 5, 2015 (8:00 a.m. - 5:00 p.m.) - Mesa, Arizona
Training / Education Classroom Seminars
The reconstruction and analysis of motorcycle crashes requires a specialized set of skills and knowledge beyond those required for typical four wheel vehicles. This seminar takes participants beyond the basics of crash reconstruction to physical models and analysis techniques that are unique to the reconstruction of motorcycle crashes, providing learners with a comprehensive summary of applicable reconstruction techniques.
2015-11-04 ...
  • November 4-6, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Just as the chassis and suspension system provides an ideal framework for the automobile, this popular SAE seminar provides an informative framework for those involved in the design of these important systems. Emphasizing the fundamental principles that underlie rational development and design of suspension components and structures, this course covers the concepts, theories, designs and applications of automotive suspension systems.
2015-10-16 ...
  • October 16, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar provides an introduction to the fundamental concepts and evolution of passenger car and light truck 4x4/all-wheel drive (AWD) systems including the nomenclature utilized to describe these systems. Basic power transfer unit and transfer case design parameters, component application to system function, the future of AWD systems, and emerging technologies that may enable future systems are covered. This course is an excellent follow-up to the "A Familiarization of Drivetrain Components" seminar (which is designed for those who have limited experience with the total drivetrain).
2015-10-06 ...
  • October 6-15, 2015 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Electric drives are found in hybrid, plug-in hybrid, and hydrogen fuel cell vehicles, as well as battery electric vehicles. More than two million hybrid vehicles worldwide utilize electric drive components, and battery technology has matured enough to enable major manufacturers to develop light-duty and commercial electric vehicles for mass production and sale beginning in 2010-2012. It is also likely that many conventional vehicles will incorporate some form of idle-stop or stop-start system comprised of a low-output electric drive, as an integral part of efforts to meet U.S. CAFE fuel economy standards and EU CO2 emission requirements.
2015-10-05 ...
  • October 5-7, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar will present an introduction to Vehicle Dynamics from a vehicle system perspective. The theory and applications are associated with the interaction and performance balance between the powertrain, brakes, steering, suspensions and wheel and tire vehicle subsystems. The role that vehicle dynamics can and should play in effective automotive chassis development and the information and technology flow from vehicle system to subsystem to piece-part is integrated into the presentation. Governing equations of motion are developed and solved for both steady and transient conditions.
2015-09-14 ...
  • September 14-15, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Advanced High Strength Steels (AHSS) are now commonly used in automotive body structural applications. The high strength of this grade classification is attractive to help reduce mass in the automotive body through reduction in thickness. Strength also supports improvements in safety requirements so that mass increases are minimized. In some specific grades of AHSS, energy absorption is possible in addition to the high strength. This course will review the definition and properties of AHSS and cover several common applications in automotive body structures.
2015-09-14 ...
  • September 14-17, 2015 (8:30 a.m. - 4:30 p.m.) - Greenville, South Carolina
Training / Education Classroom Seminars
                                                                 Understanding vehicle dynamics is one of the critical issues in the design of all vehicles, including heavy trucks. This seminar provides a comprehensive introduction to the fundamentals of heavy truck dynamics. It covers all of the critical subsystems that must be considered by designers and decision makers in determining the effect of various components on heavy truck dynamics. This seminar begins where the tires meet the ground, progressing up through the various components and bringing together the theory and practice of heavy truck dynamics.
2015-09-09 ...
  • September 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Understanding the U.S. Department of Defense (DoD) requirements, processes, and product development lifecycle allows for more effective new product engineering and development within the DoD marketplace. In addition, understanding how industry can apply currently available commercial vehicle technologies as a platform to meet current and future DoD needs may become an important factor in reducing costs and conforming to DoD budget constraints. The overall objective of this two day seminar is to establish a working knowledge of the military tactical vehicle product development process.
2015-09-03 ...
  • September 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
This seminar is presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Developing environmentally cleaner and more fuel efficient vehicles is transforming the automotive industry worldwide, particularly in China with its emphasis on new energy vehicles. There are many engineering challenges that must be addressed in designing effective new energy vehicles. The technical knowledge required to understand and make the right decisions with regard to powertrain architecture, powertrain controls, and energy management strategies is critical to success in this market.
2015-08-31 ...
  • August 31-September 1, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • November 11-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Driven by the need for lower emissions, better fuel economy and higher efficiency, hybrid vehicles are appearing in many different configurations on today's roadways. While the powertrain components such as the drive motor, motor controller and cooling system are somewhat familiar to the automotive industry, the battery systems are a relatively unfamiliar aspect. This seminar will introduce participants to the concepts of hybrid vehicles, their missions and the role of batteries in fulfilling those requirements.
2015-08-17 ...
  • August 17, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
This seminar provides an introduction to several critical aspects of heavy truck dynamics. The comprehensive presentation and discussion will begin with the mechanics and dynamics of heavy truck tires, followed by steering dynamics, and finally moves participants into suspension kinematics and dynamics. Starting at the ground and moving up, this seminar explores the important dynamic aspects of each subsystem and how each is related to the overall truck dynamics.
2015-07-30 ...
  • July 30-31, 2015 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • December 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
The certification of transport category cabin interiors requires a thorough understanding of Part 25 Transport Category aircraft cabin interior safety and crashworthiness regulations and compliance requirements. Regardless of whether it is a simple modification, a specialized completion (VIP or VVIP) or airline passenger configuration, engineers, designers, and airworthiness personnel must understand and adhere to these requirements. This two day seminar will begin with a discussion of Commercial off the Shelf (COTS) test requirements.
2015-07-30 ...
  • July 30, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
High-voltage, high-current energy storage systems and electrical circuits in many current and future alternative-propulsion powertrains present unique challenges to the automotive industry. Care must be taken to minimize risk to all who come into contact with the vehicle throughout its development and life cycle, including powertrain developers, assembly line workers, service technicians, vehicle occupants, and first responders. Significant risk to life and limb can arise from technical issues surrounding these vehicles.
2015-07-28 ...
  • July 28, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
Hybrid powertrains have been on the market for more than a decade and have become one of the most successful alternative powertrains available today. More than a million hybrids are sold globally per year, primarily in Japan and the US. Some OEMs estimate that up to 80% of their light-duty vehicles may require some level of hybridization to meet upcoming CAFE regulations in the United States. Hybrids are also starting to make inroads into markets in Europe, and have recently been introduced to Chinese and Indian markets, among others. Basic information on hybrids is scattered among information sources, and is often difficult to synthesize.
2015-06-26 ...
  • June 26, 2015 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
The June offering of this seminar is held in conjunction with the SAE 2015 Noise and Vibration Conference and Exhibition. Register for this offering and you can register to attend the Noise and Vibration Conference and Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 Noise and Vibration Conference and Exhibition for this special rate. The influx of different hybrid and electric vehicle configurations has brought about unique NVH challenges from a variety of sources.
2015-06-24 ...
  • June 24-26, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 2-4, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Increased public pressure to improve commercial truck safety and new stopping distance regulations have intensified the need to better understand the factors influencing heavy vehicle braking performance. To assist individuals and their organizations in preparing for these new truck braking standards, this seminar focuses attendees on understanding medium-duty hydraulic brake systems and heavy-duty air brake systems and how both systems' performance can be predicted, maintained and optimized.
2015-06-17 ...
  • June 17-19, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm Electric and hybrid vehicles are still relatively new products and are undergoing developmental refinements as the technology moves towards maturity. There are challenges related to the fundamentals of the technologies, the availability of various materials and sub-systems, cost targets and customer demands. The technology is complex and multi-disciplinary involving system integration of diverse components. This course will cover the interdisciplinary aspects of electric and hybrid vehicles where engineers of various disciplines have to work together to develop the system.
2015-06-16 ...
  • June 16, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This seminar covers these facets of tire safety phenomena.
2015-05-18 ...
  • May 18-20, 2015 (8:00 a.m. - 5:00 p.m.) - Greer, South Carolina
  • November 16-18, 2015 (8:00 a.m. - 5:00 p.m.) - Greer, South Carolina
Training / Education Classroom Seminars
While a variety of new engineering tools are becoming available to assist in creating optimal vehicle designs, subjective evaluation of vehicle behavior is still a vital tool to ensure desired braking, handling, and other dynamic response characteristics. In order to better prepare today's engineer for this task, this course offers twelve modules devoted to the key fundamental principles associated with longitudinal and lateral vehicle dynamics.
2015-05-11 ...
  • May 11, 2015 (1:00 p.m. - 5:00 p.m.) - Charleston, South Carolina
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting May 10 - 14, 2015 in Charleston, South Carolina. This four hour short course intends to present an overview of seals and sealing system design for military and commercial aircraft.
2015-05-04 ...
  • May 4-5, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate.
2015-04-29 ...
  • April 29-May 1, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 28-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This interactive seminar will take you beyond the basics of passenger car and light truck vehicle dynamics by applying advanced theory, physical tests and CAE to the assessment of ride, braking, steering and handling performance. Governing state-space equations with transfer functions for primary ride and open loop handling will be developed & analyzed. Building on the analysis of the state space equations, common physical tests and their corresponding CAE solutions for steady state and transient vehicle events will be presented. The "state-of-the-art" of vehicle dynamics CAE will be discussed.
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV) and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
Anytime
Training / Education On Demand Web Seminar RePlay
Vehicle functional requirements, diesel emission regulations, and subsystem thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Severe duty cycles, minimal ram air, fouling, and sometimes unconventional package layouts present unique challenges to the designer. This course introduces many airflow integration issues and vehicle-level trade-offs that effect system performance and drive the design. The goal of this six-session web seminar is to introduce engineers and managers to the basic principles of diesel cooling airflow systems for commercial and off-road vehicles.
Anytime
Training / Education On Demand Web Seminar RePlay
Hybrids, and to a lesser extent, electric vehicles, have been on the road since 1997. Although just two hybrids were on the market in 2001, there are more than a dozen today, and the market is ramping up quickly, driven by fuel prices and constraints, environmental regulations, and customer demand. The commercial vehicle market is also rapidly embracing hybrid technology. This two-hour webi seminar will highlight the passenger, light-duty, and heavy-duty hybrid and electric vehicles that are currently in production, offered for sale, or planned for near-term production.
Anytime
Training / Education On Demand Web Seminar RePlay
Although hybrid powertrains have been on the market for little more than a decade, hybridization has quickly become one of the most successful alternative powertrains available today. Some OEMs estimate that up to 80% of their light-duty vehicles will require some level of hybridization to meet upcoming CAFE regulations in the United States. Additional market drivers, such as California's greenhouse gas legislation (now adopted or in process in 20 US states and two Canadian provinces) and a possible global agreement on greenhouse gas production at the end of 2009 may help to accelerate the process.
Training / Education Online Web Seminars
Vehicle functional requirements, diesel emission regulations, and subsystem thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Severe duty cycles, minimal ram air, fouling, and sometimes unconventional package layouts present unique challenges to the designer. This web seminar introduces many airflow integration issues and vehicle-level trade-offs that effect system performance and drive the design. The goal of this six-session course is to introduce engineers and managers to the basic principles of diesel cooling airflow systems for commercial and off-road vehicles.
Viewing 1 to 30 of 51