Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 300
2017-04-27
Magazine
Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
2017-03-30
Magazine
Designing Electronic Warfare to Regain Airborne Military Dominance Certifying Composite Designs for Aerospace and Defense Electric Rockets and the Future of Satellite Propulsion Flat Cable Technology for Aerospace Applications XPONENTIAL 2017 – An AUVSI Experience Pulse Analysis Techniques for Radar and Electronic Warfare Reconfigurable Radio Tracks Flights Worldwide Development of an Optically Modulated Scatterer Probe for a Near-Field Measurement System Using Dempster-Shafer Fusion for Personnel Intrusion Detection Angular Random Walk Estimation of a Time-Domain Switching Micromachined Gyroscope Using Fisher Information Criteria for Chemical Sensor Selection via Convex Optimization Methods Luminescence Materials as Nanoparticle Thermal Sensors
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-12-01
Magazine
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
2016-10-03
Magazine
Achieving Performance Advantages in Unmanned Systems Unmanned Vehicle Systems (UVS) are reaching new levels of functionality and performance, and it's not just for air vehicles either. COTS Embedded Systems and Link Budgets The days of proprietary embedded computing systems in military systems are numbered. Custom Designing Enclosures Using 3-D CAD Modeling Due to the advancement of 3-D computer-aided design software, enclosure manufacturing is not what it used to be. Technology advances industry. Fiber Optic Multi-Sensing Platforms Enabling Innovation Across Aerospace Organizations RECAT Wake Turbulence Recategorization New Concept for Improving the Performance of Electrically Small Antennas Microwave Radiometer for Advanced Nanosatellite Control Systems Secret Sharing Schemes and Advanced Encryption Standard SIPHER: Scalable Implementation of Primitives for Homomorphic Encryption Using Mathematics to Make Computing on Encrypted Data Secure and Practical
2016-08-01
Magazine
Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements
2016-06-01
Magazine
Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2016-02-01
Magazine
Clamoring for more entertainment Connected consumers drive demand for bandwidth, though seatback entertainment remains popular. Fighting for life in military markets Airbus Defense & Space is looking to revitalize and ramp up production rates of its military aircraft portfolio.
2015-12-01
Magazine
Touch and go Avionics developments are changing life in the cockpit and at airborne work stations Sandwich cores for the future Decreasing weight while increasing strength is always critical, from airliners to future space missions to Mars. Research in sandwich cores today may lead to radical improvements in the future.
2015-10-01
Magazine
Powering on Rolls-Royce's Chief Engineer discusses how new technologies in the Trent XWB family of engines are inspiring current R&D design and evaluation work as part of its strategic roadmap for future big fanjets. Ongoing development work and associated test programs extend across a broad range of activities and involve many partners. Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.
2015-08-03
Magazine
Big Data, aircraft, and a better future Aircraft manufacturers, in particular engine makers, are exploiting the opportunities that come with collecting the vast amount of data available, from customer reports to engine exhaust temperatures. Why is it potentially so useful? What are some of the best ways to use it? Let the good times continue to roll The booming international commercial aviation sector continues to be a bright light leading the future of the aerospace industry.
2015-06-01
Magazine
Regional and bizjets refined and redefined As the regional and business jet markets steadily rebound, so too do the propulsion technologies that will provide airframers and their customers competitive advantage. Getting it right with composites With composites now a mainstay in most new aircraft designs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-05-01
Magazine
Unmanned Aerial Systems Deploying Next-Generation UAS Platforms with 3U VPX Unmanned Ground Vehicles UGVs - On the Cutting Edge of Thermal Management Unmanned Surface/Underwater Vehicles Controlling the Seas - Introducing a New Concept in Autonomous Surface/Underwater Vehicles Robotics Connectivity in Robotic Systems
2014-12-01
Magazine
Materials Infusing Lightweight Composite Structures Business Jets Business Jets Bounce Back
2014-10-01
Magazine
Propulsion: Energy Sources Flying on vegetation Avionics/Electronics Avionics heat up, in a good way Unmanned Vehicles Reaching the benchmark in secure unmanned vehicle software Thermal Management Submersion and directed flow cooling technology for military applications RF & Microwave Technology Airborne antenna considerations for C-Band telemetry systems Software-designed system improves wireless test speed and coverage
2014-09-03
Magazine
Start-up ability of UAVs on task Besides low cost, easy manufacturability, light weight, long operation time, and high durability, miniature UAVs need restart capability during flight.
2014-06-02
Magazine
Europe's aerospace industry looking confident Apart from Airbus's highly visible presence in defense and commercial aircraft, Europe also has successful capabilities in helicopters, business jets, and aero engines, and in all these areas their global market share is growing. Comparing blade-element momentum modeling to 3-D CFD Many small unmanned aerial vehicles (SUAVs) are driven by small scale, fixed blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the SUAV itself.
2014-05-07
Magazine
Defying convention Rapid prototyping has the potential to play a beneficial role in unconventional autonomous airship design. By reducing model cost, build time, difficulty of construction, and maintaining acceptable surface quality and finish, designers have greater ability to analyze several configurations of airships and to change the geometry to increase stability, reduce drag, or fulfill mission requirements.
2014-05-01
Magazine
Simulating lightweight vehicles operating on discrete terrain Researchers characterize the mobility of autonomous reconnaissance vehicles on terrain considered to be deformable, and represented as a collection of bodies of spherical shape.
2013-06-03
Magazine
Filling the space A look at the changing face of manned spaceflight and the commercialization of orbital access. Distribution of power When designing the electrical distribution system for a turboelectric architecture, it is imperative to select technologies that will provide the highest efficiency and stability for the propulsion system.
2013-04-01
Magazine
PEFCs to transform UAVs Advancements in polymer electrolyte membrane fuel cells have resulted in longer endurance missions for smaller UAVs as well as an enabler for electric aircraft that require vertical takeoff and landing capability. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher quality point-to-point air transport.
2013-02-01
Magazine
Advanced aluminum solutions for next-gen aerospace structures Airline competitiveness and the demand for improved aircraft performance and affordability (acquisition and operational) are driving advancements in technologies that can enable these improvements. 2050 vision Airbus provides a far-ranging, thought-provoking, reach-out toward some of the changes the commercial aerospace industry might expect to see by 2050.
2012-08-15
Magazine
Everything's looking up for aircraft with Internet connections Satellites will make global connectivity possible. Composite bonds put to the test The application of adhesive bonding as a joining technology for CFRP aircraft structures is essential for the realization of novel lightweight design concepts. Aerospace leads in additive manufacturing The unique advantages of making metal parts from powder-bed additive manufacturing are looking attractive to engine manufacturers. Europe's aerospace sector at a crossroads Europe is facing a massive black hole in its future defense procurement portfolio. What will replace today's fighters and trainers when the present order backlogs have been produced?
2012-07-18
Magazine
Designing the optimal airframe Integration of simulation software tools is the key, from aerodynamic CAE to structural analysis and optimization.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2012-03-14
Magazine
Propulsion systems enabling private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry.
2012-02-15
Magazine
Bright outlook for glass cockpits Cockpits are adopting larger screens and touch input, using modularity to ease upgrades. Composites give copters a lift Design, fabrication, and analysis of a tail rotor blade made of composite laminated materials for a heavy transport helicopter. Taming overruns with simulation For aerospace projects, cost overruns and program delays start in the concept and proposal stage. How could using today's advanced CAE simulations earlier reduce that risk? Going modular with airborne radar Innovative approaches to solving the affordability challenge posed by too many specialist airborne surveillance systems. Efficient & effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, brings 'customer first' approach to term as SAE International's chief elective officer.
2012-01-18
Magazine
UAVs shrink as missions, and emerging technologies, grow Remotely piloted air vehicles are getting smaller in size as technology permits previously unattainable performance from smaller packages.
Viewing 1 to 30 of 300

Filter

  • Magazine
    300