Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 5 of 5
2017-10-08
Technical Paper
2017-01-2198
Zhihong Li, Guoxiu Li, Lan Wang, Hongmeng Li, Jie Wang, Haizhou Guo, Shuangyi He
Abstract The electromagnetic valve driving mechanism is the significant equipment, which plays a vital role in the unit pump injection system; therefore, the performance of the electromagnetic valve directly influences the function of the control system. Based on the operation conditions of the unit pump injection system, a steady electromagnetic valve model was modified to study the influence factors of electromagnetic force and the best combination to get the maximum electromagnetic force. The validation model was verified by experiment. The effects of some crucial parameters upon the electromagnetic force were investigated in the present paper, (including working airspace, magnetic pole’s cross-sectional area, coil position, coil turn, the armature thickness). The results show that the electromagnetic force of the solenoid valve enhanced with the increase of driving current and with the decrease of working airspace.
2017-07-10
Technical Paper
2017-28-1973
Sakthivel Balasubramaniyan, Sridhar Ramachandran, Srinivasan Bashyam, Suresh Kumar
Abstract Solenoids are type of inductive actuators extensively used in mobility industries as flow control valves. Now a day, the conventional mechanical actuators are replaced by solenoids, because the solenoids have high precision control and faster response within a controlled magnetic field. Solenoids are classified into two types based on the mode of operation. Solenoid is operated either in ON/OFF mode for switching applications or in Pulse Width Modulation (PWM) for high frequency applications. A solenoid consists of two critical parts, one is the reciprocating plunger and another is the static valve case. During higher number of repeated operations, the solenoid plunger hits the valve case and induces wear on the seating surface. The solenoids are also exposed to the corrosive environment in some applications.
2017-07-10
Technical Paper
2017-28-1948
John Samuel Kopppula, Thundil Karuppa Raj Rajagopal, Edison Gundabattini
Abstract The present work is concentrated to study the effect of varying inlet pressures on the dynamics of the suction valve obtained from a hermetic reciprocating compressor. The effect of valve functioning on the efficiency of a compressor is highly acceptable. Rather than the delivery valve, the suction valve has a significant impact on the compressor efficiency. The reed valve in a hermetic compressor is a cantilever type arrangement. The valve operates due to the pressure difference between the suction muffler and the cylinder. The numerical analysis which includes Fluid-structure interaction is used in the present study. The flow and structural domain employed in the present study are modelled with Solidworks 15.0. The fluid structure interaction analysis is a combination of ANSYS Fluent and ANSYS structural. These two are coupled with a system coupling in ANSYS Workbench 16.0. The numerical results obtained from the simulation are validated with the experimental data.
2017-03-28
Technical Paper
2017-01-1350
Jon Olson, Mark Fleming, Ram Krishnaswami, Robert Pellillo
Abstract The fuel filler tube check valve (FTCV) is an integral part of a vehicle’s refueling system. The primary function of this valve is to control the refueling characteristics in a manner that enables the vehicle to be refueled efficiently and under wide ranging conditions, while limiting the amount of fuel or fuel vapor emissions being released into the environment. These valves accomplish this function by allowing the flow of gasoline to pass through the valve and into the tank during the refueling process with minimal restriction while limiting the reverse flow as the fuel tank approaches full. The location of these valves varies from vehicle to vehicle but are generally located within the fuel filler or fuel tank system. They have been engineered and developed to ensure the vehicle will meet customer and industry refueling requirements as well as refueling emissions mandates from the Environmental Protection Agency (EPA) and the California Air Resources Board (CARB).
2017-03-28
Technical Paper
2017-01-0684
Vickey B. Kalaskar, Raphael Gukelberger, Bradley Denton, Thomas Briggs
Abstract Dedicated EGR has shown promise for achieving high efficiency with low emissions [1]. For the present study, a 4-cylinder turbocharged GDI engine which was modified to a D-EGR configuration was used to investigate the impact of valve phasing and different injection strategies on the reformate production in the dedicated cylinder. Various levels of positive valve overlap were used in conjunction with different approaches for dedicated cylinder over fueling using PFI and DI fuel systems. Three speed-load combinations were studied, 2000 rpm 4 bar IMEPg, 2000 rpm 12 bar IMEPg, and 4000 rpm 12 bar IMEPg. The primary investigation was conducted to map out the dedicated cylinders' performance at the operating limits of intake and exhaust cam phasing. In this case, the limits were defined as conditions that yielded either no reformate benefit or led to instability in the dedicated cylinder.
2017-03-28
Technical Paper
2017-01-1075
Wen Chen, Reda Adimi, Xingfu Chen, Todd Brewer, Ling Shi
Abstract In CAE analysis of cylinder bore distortion, valve seat distortion, valve guide-to-seat misalignment and cam bore misalignment, nodal displacements on the cylinder bore inner surface and on the gage lines of valve seats, valve guides and cam bores are typically output. Best fit cylinders, best fit circles and best fit lines are computed by utilizing the output displacements of the deformed configuration. Based on the information of the best fit geometry, distortions and misalignments are assessed. Some commercial and in-house software is available to compute the best fit cylinders, best fit circles and best fit lines. However, they suffer from the drawback that only one best-fit geometry can be computed at a time. Using this kind of software to assess distortions and misalignments of engine components would be tedious and prone to error, since data transfer as well as the intermediate computation has to be done by hand, and the process is not automatic.
2017-03-28
Technical Paper
2017-01-1066
Christoph Beerens, Alexander Mueller, Kimm Karrip
Abstract As emissions regulations and carbon footprint are more and more demandingly controlled, thermal efficiency of engine components must be optimized. Valve group components have to allow for ever increasing temperatures, endure aggressive condensates or even contribute directly to rising efficiency and emissions demands. Even with integrated and cooled exhaust manifolds, the exhaust valves are meeting full combustion temperatures, especially for stoichiometric combustion. MAHLE has developed a new technology in order to measure valve temperatures in real time, i.e. Transient Valve Temperature Measurement (TVTM). This is a complex methodology using thermocouples installed inside of the valves, offering the possibility to run the engine at different conditions, without any functional changes in the valve train system at all. Specifically valve rotation is not affected and thus temperatures all around the valve seat can be captured during rotation.
2017-03-28
Technical Paper
2017-01-1090
Praveen Kumar Tumu, KungHao Wang, Juhchin Yang, Selvakumar Palani, Balaji Srinivasan
Abstract In the shop floor, cracking issue was noticed during assembly of valve seat and valve guide in the engine cylinder head, especially near the valve seating area. This paper reveals a non- linear finite element methodology to verify the structural integrity of a cylinder head during valve seat and valve guide assembly press-in operation under the maximum material condition, i.e., smallest hole size on cylinder head for valve seat and guide and largest diameter of valve seat and guide. Material and geometrical nonlinearities, and contact are included in this method to replicate the actual seat and guide press-in operation which is being carried out in shop floor. The press-in force required for each valve seat and valve guide assembly is extracted from simulation results to find out the tonnage capacity of pressing machine for cylinder head assembly line. Stress and plastic deformation due to assembly load are the criteria checked against the respective material yield.
2017-03-28
Journal Article
2017-01-0131
Chiranth Srinivasan, Chonglin Zhang, Haiyang Gao, De Ming Wang, Jody Slike
Abstract In an automotive cooling circuit, the wax melting process determines the net and time history of the energy transfer between the engine and its environment. A numerical process that gives insight into the mixing process outside the wax chamber, the wax melting process inside the wax chamber, and the effect on the poppet valve displacement will be advantageous to both the engine and automotive system design. A fully three dimensional, transient, system level simulation of an inlet controlled thermostat inside an automotive cooling circuit is undertaken in this paper. A proprietary CFD algorithm, Simerics-Sys®/PumpLinx®, is used to solve this complex problem. A two-phase model is developed in PumpLinx® to simulate the wax melting process. The hysteresis effect of the wax melting process is also considered in the simulation.
2017-01-10
Technical Paper
2017-26-0159
B Sakthivel, R Elayaraja, M Sivakumar, R Sridhar, J Suresh Kumar, B L Ganapati Subramaniyam
Abstract Solenoids are electro mechanical actuators used in automotive industries as flow control valve. Solenoids replace the conventional mechanical valve since it is having a precise control and faster response. Solenoid is operated either in ON/OFF mode or Pulse Width Modulation mode (PWM). When operated in PWM at a given frequency, the solenoid undergoes finite number of repeated operations. A normally closed solenoid contains two critical parts, one is a plunger, which is a moving part and another is valve case, which is a static part. The plunger hits the valve case during repeated number of operations which undergo extreme wear. Since the functionality and performance of the solenoid mainly rely on the plunger and valve case, it is inevitable to have an optimum material selection in order to achieve higher durability. This paper illustrates the study of material selection for an air control solenoid used for two wheeler application.
2016-04-05
Technical Paper
2016-01-0093
Haizhen Liu, Rui He, Jian Wu, Wenlong Sun, Bing Zhu
Abstract With the development of modern vehicle chassis control systems, such as Anti-Lock Brake System (ABS), Acceleration Slip Regulation (ASR), Electronic Stability Control (ESC), and Regenerative Braking System (RBS) for EVs, etc., there comes a new requirement for the vehicle brake system that is the precise control of the wheel brake pressure. The Electro-Hydraulic Brake system (EHB), which owns an ability to adjust four wheels’ brake pressure independently, can be a good match with these systems. However, the traditional control logic of EHB is based on the PWM (Pulse-Width Modulation), which has a low control accuracy of linear electromagnetic valves. Therefore, this paper presents a research of the linear electro-magnetic valve characteristic analysis, and proposes a precise pressure control algorithm of the EHB system with a feed forward and a PID control of linear electro-magnetic valves.
2016-04-05
Journal Article
2016-01-0310
Xinran Tao, John R. Wagner
Abstract The pursuit of greater fuel economy in internal combustion engines requires the optimization of all subsystems including thermal management. The reduction of cooling power required by the electromechanical coolant pump, radiator fan(s), and thermal valve demands real time control strategies. To maintain the engine temperature within prescribed limits for different operating conditions, the continual estimation of the heat removal needs and the synergistic operation of the cooling system components must be accomplished. The reductions in thermal management power consumption can be achieved by avoiding unnecessary overcooling efforts which are often accommodated by extreme thermostat valve positions. In this paper, an optimal nonlinear controller for a military M-ATV engine cooling system will be presented. The prescribed engine coolant temperature will be tracked while minimizing the pump, fan(s), and valve power usage.
2016-04-05
Technical Paper
2016-01-1054
Jorge Martins, Carlos Pereira, F.P. Brito
Abstract One way to increase efficiency and performance of 2-stroke engines is the addition of an exhaust valve to control the opening/closure of the exhaust port. With this implementation it is possible to change the exhaust timing for different conditions. However, conventional systems cannot change the exhaust opening and closure timings independently. The work herein presented shows the development of a new exhaust rotary valve enabling the control of the opening independently from the control of the closure of the exhaust port. The study is based on kinetic and thermodynamic analysis. Some manufacturers use exhaust rotary valves but none of them performs a fully rotary motion. This kind of motion has various benefits such as smoothness and most notably the ability to control both the opening and the closure timing of the exhaust independently. Regarding the kinematic analysis, a simple model was created to determine the most suitable valve angles.
2016-04-05
Journal Article
2016-01-1078
Rıfat Kohen Yanarocak, Hakan Boz
Abstract In this paper, a simultaneous design and development work for a diesel engine valvetrain system is presented. The rocker arm is one of the most important components of the valvetrain system which is transmitting the energy between the valves and the camshaft. Valvetrain system becomes even more complicated, when the extreme high speed of the system and nonlinear character of combustion is combined with the unpredictable behavior of the hydraulic lost motion mechanism during engine brake. As the complexity increases, it gets harder to predict valvetrain stress values especially while engine brake is in action. By taking all of these effects into account, that is reducing reliability of virtual analysis, requirement to conduct a strain measurement on valvetrain became inevitable.
2016-04-05
Technical Paper
2016-01-1071
Sangchul Lee, SeongMin Park, Changsun Hwang
Abstract A low pressure exhaust gas recirculation system (LP EGR system) enables the expansion of the EGR operating area than that of the widely used high pressure EGR system. As a result, fuel consumption and emissions can be improved. In order to meet the EU 5 emissions regulations, an exhaust throttle LP EGR system was used. The EU5 vehicles developed using this system have greater merits than other vehicles. However, because the exhaust throttle LP EGR valve is installed adjacent to the after-treatment system, the material of the LP EGR valve itself must be stainless steel in order to withstand the thermal stress, consequently, the cost is increased. Therefore, in order to achieve cost rationalization for EU6 vehicles, an intake throttle LP EGR system is developed and applied to replace the exhaust throttle LP EGR system. In order to apply the intake throttle LP EGR system, the EGR valve is installed in front of the turbo charger compressor.
2016-04-05
Journal Article
2016-01-0776
Mateos Kassa, Carrie Hall, Andrew Ickes, Thomas Wallner
Abstract Advanced internal combustion engines, although generally more efficient than conventional combustion engines, often encounter limitations in multi-cylinder applications due to variations in the combustion process. This study leverages experimental data from an inline 6-cylinder heavy-duty dual fuel engine equipped with a fully-flexible variable intake valve actuation system to study cylinder-to-cylinder variations in power production. The engine is operated with late intake valve closure timings in a dual-fuel combustion mode featuring a port-injection and a direct-injection fueling system in order to improve fuel efficiency and engine performance. Experimental results show increased cylinder-to-cylinder variation in IMEP as IVC timing moves from 570°ATDC to 610°ATDC, indicating an increasingly uneven fuel distribution between cylinders.
2016-04-05
Technical Paper
2016-01-0671
Yan Chang, Margaret Wooldridge, Stanislav V. Bohac
Using exhaust gas recirculation (EGR) as a diluent instead of air allows the use of a conventional three-way catalyst for effective emissions reduction. Cooled EGR can also reduce fuel consumption and NOx emissions, but too much cool EGR leads to combustion instability and misfire. Negative valve overlap (NVO) is explored in the current work as an alternative method of dilution in which early exhaust valve closing causes combustion products to be retained in the cylinder and recompressed near top dead center, before being mixed with fresh charge during the intake stroke. The potential for fuel injection during NVO to extend the dilution limit of spark ignition combustion is evaluated in this work using experiments conducted on a 4-cylinder 2.0 L gasoline direct injection engine with variable intake and exhaust valve timing. The results demonstrate fuel injection during NVO can extend the dilution limit, improve brake specific fuel consumption (BSFC), and reduce CO and NOx emissions.
2016-02-01
Technical Paper
2016-28-0001
Akhilendra Pratap Singh, Suresh Gadekar, Avinash Kumar Agarwal
Abstract Fuel-air mixing is the main parameter, which affects formation of NOx and PM during CI combustion. Hence better understanding of air-flow characteristics inside the combustion chamber of a diesel engine became very important. In this study, in-cylinder air-flow characteristics of four-valve diesel engine were investigated using time-resolved high-speed tomographic Particle Imaging Velocimetry (PIV). For visualization of air-flow pattern, fine graphite particles were used for flow seeding. To investigate the effect of different operating parameters, experiments were performed at different engine speeds (1200 rpm and 1500 rpm), intake air temperatures (room temperature and 50°C) and intake port configurations (swirl port, tangential port and combined port). Intake air temperature was controlled by a closed loop temperature controller and intake ports were deactivated by using a customized aluminum gasket.
2015-11-17
Technical Paper
2015-32-0742
Kenta Goto, Shinji Noda, Kohei Nakashima, Yoshio Murakami
To improve engine torque and specific fuel consumption in a supermilage vehicle, we experimentally adjusted the valve lift and opening period in rocker arms, testing various follower configurations and adjust screws. Using the follower configuration in a commercially-available rocker arm, we compared 4 different levels of valve lift and opening period in the intake, and 4 different levels in the exhaust, making 16 combinations. Then, utilizing 5 kinds of modified follower configurations of the rocker arms in the intake, and 3 in the exhaust, we also compared 24 combinations (including the commercially-available follower configurations). We tested our experimental supermilage engine under full-load at 2000 to 4500rpm, simulating powering a supermilage vehicle.
2015-11-17
Technical Paper
2015-32-0701
Takayuki Sugita
An existing 4 stroke-cycle gasoline engine has been partially modified without dynamically changing its mechanism for the purpose to utilize the compressed air as an alternative energy source. The principle is to mechanically control the compressed air flow through the intake and exhaust valve every revolution of a crankshaft by modifying the camshaft cam's lobes, which changes the engine operation from 4 strokes to 2 strokes cycle mode. In the previous investigation the principle was verified with a current 50 cc motorcycle modified engine and the pressure behavior inside the cylinder of the compressed air engine was evaluated. It turned out as a most promising result that the back pressure, which is defined as the positive pressure left in an expansion chamber while a piston is moving back from BDC to TDC, has a high influence on the performance of the compressed air reciprocating engine.
2015-09-27
Journal Article
2015-01-2672
Aihong Meng, Jian Song
Abstract High speed on-off valve is applied widely in vehicle control systems. When high speed on-off valve is controlled by Pulse Width Modulation (PWM) of high frequency, the valve core can float at a certain position which is adjusted by changing the duty ratio within a certain effective range. Then the high speed on-off valve can control the flow and pressure linearly like proportional valve. Thus it is essential to extend the effective range of duty ratio to improve the linear control performance of high speed on-off valve. In this paper, the high speed on-off valve of the automotive Electronic Stability Program (ESP) is the focus, and its flow force is analyzed in detail to get the effects of hydraulic parameters on the valve performance. The mathematic model of the high speed on-off valve is derived. Then the valve structural parameters are optimized according to the Genetic Algorithm(GA), offering the theoretical references for extending the effective duty ratio of PWM.
2015-09-22
Technical Paper
2015-36-0104
Fernanda Pinheiro Martins, Rogério H. Onoda, Henedino Gutierrez
Abstract This paper deals with the study of different design configurations for intake valves and valve seats on a current production cylinder head and their effect on airflow behavior and optimization, under steady flow condition. The analysis was performed trough a Design for Six-Sigma methodology (DFSS). The cases were simulated through computational fluid dynamics (CFD) software and a prototype considering the best configuration was built and tested at flow bench. Correlation between simulation and experimental data was performed in order to validate the results for current, as well as, for future studies. The goal is to determine how geometric design variations on intake valve profiles and valve seats affect airflow on the particular cylinder head.
2015-09-22
Technical Paper
2015-36-0477
Carmine Maria Di Sanctis, Waldyr Luiz Ribeiro Gallo
Abstract New devices and control techniques have been adopted to take advantage of variable valve timing properties to improve engine performance or load control. This paper presents a study focused on engine load control strategies associated with early intake valve closing or late intake valve closing. It can be shown that these load control modes can improve the indicated thermal efficiency of the engine as compared with the conventional throttle control. These strategies are sometime called Miller cycle or Atkinson cycle, since the real compression ratio becomes smaller than the expansion ratio. A thermodynamic spark-ignition engine simulation model was employed. The advantage of a simulation model is to conduct parametric studies without the need of complex experimental apparatus. In this way, a deep understanding of the physical phenomena can be achieved and the sole effect of the desired parameter can be shown.
2015-09-22
Technical Paper
2015-36-0267
Roberto Berlini Rodrigues da Costa, Rafael Lara Franco, Carlos Alberto Gomes, Raniro de Oliveira Alvarenga Coelho, Ramón Molina Valle
Abstract The design and development of highly efficient internal combustion engines require a thorough investigation of the fluid dynamic processes. This paper presents the experimentally determination and computational fluid dynamics simulations of the intake valves discharge coefficients of a four valve spark-ignition single cylinder research engine. The mass flow rate and air pressure were measured directly in the intake port for six different values of valve lift (4.68; 6.16; 7.48; 8.62; 9.46; and 10.49mm). The theoretical mass flow rates were obtained based on considerations of subsonic flow. Simulations were carried using the Star CCM+ commercial code. Mesh independence studies, using the velocity fields as monitors, have been made for reliability of the simulations. As a result, a methodology was successfully implemented to obtain the discharge coefficients experimentally and the simulations were validated with a maximum deviation of 6.62%.
2015-09-06
Technical Paper
2015-24-2410
Stefania Falfari, Claudio Forte, Gian Bianchi, Giulio Cazzoli, Cristian Catellani, Lucio Postrioti, Fabrizio Ottobre
In the next incoming future the necessity of reducing the raw emissions leads to the challenge of an increment of the thermal engine efficiency. In particular it is necessary to increase the engine efficiency not only at full load but also at partial load conditions. In the open literature very few technical papers are available on the partial load conditions analysis. In the present paper the analysis of the effect of the throttle valve rotational direction on the mixture formation is analyzed. The engine was a PFI 4-valves motorcycle engine. The throttle valve opening angle was 17.2°, which lays between the very partial load and the partial load condition. The CFD code adopted for the analysis was the FIRE AVL code v. 2013.2. The exhaust, intake and compression phases till TDC were simulated: inlet/outlet boundary conditions from 1D simulations were imposed.
2015-09-01
Technical Paper
2015-01-1943
Yuichiro Miura, Shinya Sasaki, Tsuyoshi Kashio, Ayumi Takahashi
Investigation of both intake valve deposit (IVD) formation tendency and the effect of surrounding conditions (e.g. atmospheric temperature) on IVD formation was conducted using poly aromatics-rich gasoline in a port fuel injected (PFI) engine. The IVD mostly consisted of carbonaceous deposit and this was shown to be derived from the heavier poly aromatic fuel molecules and engine oil. Analysis also indicated that some metals in the deposit structure came from additives of lubricating oil and the wear and/or corrosion within the engine. In this engine test, there was a significant effect of room temperature where higher room temperatures correlated with higher levels of IVDs. These results illustrate the importance of the surrounding condition in order to understand the IVD issues, higher IVDs weights will result under hotter driving (e.g. in summer) condition.
2015-09-01
Technical Paper
2015-01-1818
Kangwoo Seo, Hua Zhao
In order to investigate feasibility of DME (Di-methyl ether) assisted gasoline CAI (controlled-auto ignition) combustion, direct DME injection is employed to act as the ignition source to trigger the auto-ignition combustion of premixed gasoline/air mixture with high temperature exhaust gas. Intake re-breathing valve strategy is adopted to obtain internal exhaust recirculation (EGR) that regulates heat release rate and ignitability of the premixed gasoline and air mixture. The effects of intake re-breathing valve timing and 2nd DME injection timing of different split injection ratios were investigated and discussed in terms of combustion characteristics, emission and efficiencies. The analyses showed that re-breathing intake valve timing had a large effect on the operation range of CAI combustion due to EGR and intake temperature variation.
2015-09-01
Technical Paper
2015-01-1796
Andrew Ickes, Reed Hanson, Thomas Wallner
Dual-fuel combustion using port-injected gasoline with a direct diesel injection has been shown to achieve low-temperature combustion with moderate peak pressure rise rates, low engine-out soot and NOx emissions, and high indicated thermal efficiency. A key requirement for extending high-load operation is moderating the reactivity of the premixed charge prior to the diesel injection. Reducing compression ratio, in conjunction with a higher expansion ratio using alternative valve timings, decreases compressed charge reactivity while maintain a high expansion ratio for maximum work extraction. Experimental testing was conducted on a 13L multi-cylinder heavy-duty diesel engine modified to operate dual-fuel combustion with port gasoline injection to supplement the direct diesel injection. The engine employs intake variable valve actuation (VVA) for early (EIVC) or late (LIVC) intake valve closing to yield reduced effective compression ratio.
2015-09-01
Technical Paper
2015-01-1794
Yan Zhang, Macklini DallaNora, Hua Zhao
Controlled Auto Ignition (CAI), also known as Homogeneous Charge Compression Ignition (HCCI), is one of the most promising combustion technologies to reduce the fuel consumption and NOx emissions. In order to take advantage of the inherent ability to retain a large and varied amount of residual at part-load condition and its potential to achieve extreme engine downsizing of a poppet valve engine running in the 2-stroke cycle, a single cylinder 4-valves camless direct injection gasoline engine has been developed and employed to investigate the CAI combustion process in the 2-stroke cycle mode. The CAI combustion is initiated by trapped residual gases from the adjustable scavenging process enabled by the variable intake and exhaust valve timings. In addition, the boosted intake air is used to provide the in-cylinder air/fuel mixture for maximum combustion efficiency.
2015-09-01
Technical Paper
2015-01-1987
Lei Shi, Hualei Li, Huiyan Zhang, Xiaojian Mao, Kangyao Deng, Bo Liu, Lin Hua
The concept of regulated two-stage turbocharging system is proposed to provide high boost pressure level over a wide range of engine speed by regulating the energy distribution of two turbochargers. However, the control strategy of turbine bypass valve becomes more complicated due to the frequently changing working of vehicle diesel engines. In this paper, a two-stage turbocharging system was matched for D6114 diesel engine to improve the low-speed torque. The effect of valve opening on the steady-state and transient performance was analyzed, and two different regulating laws were determined according to the different optimum aims. Then the transient response characteristics of two different regulating laws were studied and optimized at three speeds with the transient loading test. For steady-state performance, the output power and fuel efficiency were increased with the matched turbocharging system.
Viewing 1 to 5 of 5

    Filter