Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 48
2017-11-01
Magazine
All about endurance Co-founder of San Diego State University Baja SAE team narrates a success story from behind the wheel. Air superiority Legacy of the astronaut Neil Armstrong helps provide institutional motivation for aerospace engineering students at the University of Cincinnati. Spartan power Concentration on new engine helps propel San Jose State to success at 2017 Formula SAE Michigan competition.
2017-09-28
Magazine
Using Thermal Simulation to Model the Effects of Wind on the Mars Curiosity Rover Quality and Validation of Digital Designs for Aerospace and Defense Scaling LiDAR Optical Payloads from Drones to Miniature UAVs Using Sintered Fiber Metal Composites for Aircraft Acoustic Attenuation GaN Breaks Barriers RF Power Amplifiers Go Wide and High Test System Ensures Flawless Performance of Military RF Devices The Impact of Video Compression on Remote Cardiac Pulse Measurement Using Imaging Photoplethysmography Remote physiological measurement technique leverages digital cameras to recover the blood volume pulse from the human body. Sensitivity Simulation of Compressed Sensing Based Electronic Warfare Receiver Using Orthogonal Matching Pursuit Algorithm Calculate the sensitivity of a CS based EW receiver using two modulation schemes.
2017-04-27
Magazine
Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
2017-03-01
Magazine
‘Not just a student club’ How the University of Toronto Aerospace team (UTAT) came to redefine the mission and structure of the design team. Success doesn’t come by chance In an SAE International technical paper, students at the University of Idaho identify best practices for their SAE Clean Snowmobile Challenge team. Winning formula Auburn University team hopes to carry forward the momentum of victory at the 2016 Formula SAE Lincoln competition into 2017.
2016-12-01
Magazine
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
2016-10-03
Magazine
Achieving Performance Advantages in Unmanned Systems Unmanned Vehicle Systems (UVS) are reaching new levels of functionality and performance, and it's not just for air vehicles either. COTS Embedded Systems and Link Budgets The days of proprietary embedded computing systems in military systems are numbered. Custom Designing Enclosures Using 3-D CAD Modeling Due to the advancement of 3-D computer-aided design software, enclosure manufacturing is not what it used to be. Technology advances industry. Fiber Optic Multi-Sensing Platforms Enabling Innovation Across Aerospace Organizations RECAT Wake Turbulence Recategorization New Concept for Improving the Performance of Electrically Small Antennas Microwave Radiometer for Advanced Nanosatellite Control Systems Secret Sharing Schemes and Advanced Encryption Standard SIPHER: Scalable Implementation of Primitives for Homomorphic Encryption Using Mathematics to Make Computing on Encrypted Data Secure and Practical
2016-09-01
Magazine
Ruling the skies Warsaw University of Technology and Georgia Tech dominate SAE Aero Design competitions. European teams take top spots at FSAE Michigan, U.S. teams at FSAE Lincoln Universitat Stuttgart of Germany and Auburn University of the U.S. take crowns at SAE Collegiate Design Series Formula competitions. Michigan Baja Racing repeats as Baja SAE season champion Coming in second is Rochester Institute of Technology, which was victorious in one of the 3 Baja SAE competitions.
2016-06-01
Magazine
Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-16
Magazine
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
2015-10-01
Magazine
Finding success on an international track Student members of the University of Missouri's Formula SAE team are learning firsthand that international collaboration is the future of engineering. A vision. A car. A cause. New Mexico State Aggies are tough enough to race pink. CyberAuto Challenge helps close talent gap Having a supply of high-quality young engineers is key to beefing up the automotive industry's cyber defenses.
2015-10-01
Magazine
Powering on Rolls-Royce's Chief Engineer discusses how new technologies in the Trent XWB family of engines are inspiring current R&D design and evaluation work as part of its strategic roadmap for future big fanjets. Ongoing development work and associated test programs extend across a broad range of activities and involve many partners. Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.
2015-08-03
Magazine
Big Data, aircraft, and a better future Aircraft manufacturers, in particular engine makers, are exploiting the opportunities that come with collecting the vast amount of data available, from customer reports to engine exhaust temperatures. Why is it potentially so useful? What are some of the best ways to use it? Let the good times continue to roll The booming international commercial aviation sector continues to be a bright light leading the future of the aerospace industry.
2015-05-01
Magazine
Unmanned Aerial Systems Deploying Next-Generation UAS Platforms with 3U VPX Unmanned Ground Vehicles UGVs - On the Cutting Edge of Thermal Management Unmanned Surface/Underwater Vehicles Controlling the Seas - Introducing a New Concept in Autonomous Surface/Underwater Vehicles Robotics Connectivity in Robotic Systems
2015-02-02
Magazine
Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.
2014-10-01
Magazine
Propulsion: Energy Sources Flying on vegetation Avionics/Electronics Avionics heat up, in a good way Unmanned Vehicles Reaching the benchmark in secure unmanned vehicle software Thermal Management Submersion and directed flow cooling technology for military applications RF & Microwave Technology Airborne antenna considerations for C-Band telemetry systems Software-designed system improves wireless test speed and coverage
2014-09-03
Magazine
Start-up ability of UAVs on task Besides low cost, easy manufacturability, light weight, long operation time, and high durability, miniature UAVs need restart capability during flight.
2014-06-02
Magazine
Europe's aerospace industry looking confident Apart from Airbus's highly visible presence in defense and commercial aircraft, Europe also has successful capabilities in helicopters, business jets, and aero engines, and in all these areas their global market share is growing. Comparing blade-element momentum modeling to 3-D CFD Many small unmanned aerial vehicles (SUAVs) are driven by small scale, fixed blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the SUAV itself.
2014-05-01
Magazine
Simulating lightweight vehicles operating on discrete terrain Researchers characterize the mobility of autonomous reconnaissance vehicles on terrain considered to be deformable, and represented as a collection of bodies of spherical shape.
2013-04-01
Magazine
PEFCs to transform UAVs Advancements in polymer electrolyte membrane fuel cells have resulted in longer endurance missions for smaller UAVs as well as an enabler for electric aircraft that require vertical takeoff and landing capability. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher quality point-to-point air transport.
2012-02-15
Magazine
Bright outlook for glass cockpits Cockpits are adopting larger screens and touch input, using modularity to ease upgrades. Composites give copters a lift Design, fabrication, and analysis of a tail rotor blade made of composite laminated materials for a heavy transport helicopter. Taming overruns with simulation For aerospace projects, cost overruns and program delays start in the concept and proposal stage. How could using today's advanced CAE simulations earlier reduce that risk? Going modular with airborne radar Innovative approaches to solving the affordability challenge posed by too many specialist airborne surveillance systems. Efficient & effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, brings 'customer first' approach to term as SAE International's chief elective officer.
2012-01-18
Magazine
UAVs shrink as missions, and emerging technologies, grow Remotely piloted air vehicles are getting smaller in size as technology permits previously unattainable performance from smaller packages.
2011-09-07
Magazine
Hypersonic possibilities When it comes to reviving high-speed air travel, it all comes down to propulsion, propulsion, propulsion. Shrinking electronics help fuel rising usage Integration helps UAVs carry more sensors and send data faster, making unmanned aircraft more valuable. A greener flight path 'Eco-efficient Innovation Leading the Future of Aviation' is the theme of SAE's 2011 AeroTech conference to be held OCt. 18-21 in Toulouse, France. Manufacturing advanced materials A look at some of the challenges of additive layer manufacturing, as well as the advantages it brings to the aerospace industry.
2011-02-25
Magazine
Formula SAE-a winners again Monash University took the top spot in the 2010 Formula SAE-Australasia student competition for the second year in a row. Dual-fuel lab engines achieve high efficiencies, low emissions Experiments conducted by researchers at the University of Wisconsin-Madison as well as at Oak Ridge National laboratory demonstrate that partial blending of two fuels in the cylinder can promote a more ideal combustion process. Detroit motor show Small and efficient cars stole the show at the recent North American International auto show. nextgen today and tomorrow The FAA has reached a major milestone on the next generation air transportation system initiative to modernize America's national airspace system.
2010-06-09
Magazine
Drones feel the squeeze of advanced technologies Compact electronics are allowing UAVs to do more, even as they come in smaller and smaller packages.
Viewing 1 to 30 of 48

Filter

  • Magazine
    48