Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 148
2018-11-26 ...
  • November 26-27, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Attendees discover the importance of knowing their audiences and how to communicate technical information in a "user-friendly" style.
2018-10-19 ...
  • October 19, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of position are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, and sometimes a lone example of composite position is given, those discussions often overlook the variations allowed that enable more accurate control based on part function. This advanced web seminar will clarify the proper use of “double-decker” position controls in GD&T. There are two distinct types: composite position (one symbol) and two single-segment position controls (two symbols). These are commonly used to locate patterns of features (bolt circles, etc.), but they are rarely taught in any depth.
2018-10-17 ...
  • October 17, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the topic of profile is covered in a basic Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often ignore the variations allowed with these symbols that enable them to be used in complex ways. This advanced web seminar will clarify the proper use of the profile tolerances in GD&T and uncover the nuances of these two symbols. Since profile of a surface is arguably the most powerful GD&T symbol, its full potential will be explored. It can be used to control size, form, orientation, and location and its relationship to datums can be varied.
2018-10-15 ...
  • October 15, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of datums are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often overlook the variations that enable datums to be used in complex ways. This advanced course will detail the proper use of datums, showing their full potential to make your drawings as effective as possible. Most people who use GD&T are familiar with traditional datums derived from flat surfaces, and have adequate knowledge of the principle of establishing 3-2-1 contact points.
2018-10-01 ...
  • October 1-5, 2018 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Engineering Academy covers a variety of vehicle noise control engineering principles and practices. Two specialty tracks are available: Vehicle Interior Noise and Powertrain Noise. While the Powertrain Noise track focuses on NVH issues generated by powertrain noise sources and the design strategies to minimize them, the Vehicle Interior Noise track focuses on the understanding and application of acoustical materials to optimize NVH in the passenger or operator compartment of a vehicle. Considerable attention is given to current measurement and instrumentation technologies and their effective use.
2018-07-16 ...
  • July 16-17, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers are taught to create designs that meet customer specifications. When creating these designs, the focus is usually on the nominal values rather than variation. Robustness refers to creating designs that are insensitive to variability in the inputs. Much of the literature on robustness is dedicated to experimental techniques, particularly Taguchi techniques, which advocate using experiments with replications to estimate variation. This course presents mathematical formulas based on derivatives to determine system variation based on input variation and knowledge of the engineering function.
2018-06-27 ...
  • June 27-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design for Manufacturing and Assembly (DFM+A), pioneered by Boothroyd and Dewhurst, has been used by many companies around the world to develop creative product designs that use optimal manufacturing and assembly processes. Correctly applied, DFM+A analysis leads to significant reductions in production cost, without compromising product time-to-market goals, functionality, quality, serviceability, or other attributes. In this two-day seminar, you will not only learn the Boothroyd Dewhurst Method, you will actually apply it to your own product design!
2018-06-22 ...
  • June 22, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Effective decision making is critical to maximizing profit/minimizing expenses, return on capital spending, and operational efficiency. To understand the impact of decisions that affect the enterprise, professionals at every level must secure and integrate relevant cross-functional information. Register for this seminar and learn skills needed to base decision making on solid business knowledge and sound financial principles instead of on emotion or "your gut." The instructor walks you through the tenets of structured decision-making and teaches a step-by-step approach to make practical, effective decisions.
2018-05-22 ...
  • May 22-23, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches an introduction to functional gaging design and how to verify part dimensional requirements using functional gages and other measurement methods. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Newly acquired learning is reinforced throughout the class with numerous practice problems.
2018-05-14 ...
  • May 14-25, 2018 (6 Sessions) - Live Online
  • October 29-November 9, 2018 (6 Sessions) - Live Online
Training / Education Online Web Seminars
The Finite Element Analysis (FEA) has been widely implemented by automotive companies and is used by design engineers as a tool during the product development process. Design engineers analyze their own designs while they are still in the form of easily modifiable CAD models to allow for quick turnaround times and to ensure prompt implementation of analysis results in the design process.
2018-05-10 ...
  • May 10-11, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The sound package materials for vehicle noise control seminar provides a detail and thorough analysis of three different classes of acoustical materials – namely absorbers, barriers, and dampers, how they are different from each other, and acoustical properties that materials should possess for optimum vehicle noise control. The seminar addresses new advances in acoustical materials, primarily in absorption materials that impact the vehicle acoustics. The seminar covers ways to evaluate the acoustical performance of these materials using different test methods, including material, component, and vehicle level measurements.
2018-05-10 ...
  • May 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Greenville, South Carolina
  • September 12-14, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
Internal audits (a requirement of the AS9100 Rev D Standard) are intended to verify the compliance and effectiveness of the organization's quality management system. Internal auditors must be knowledgeable of these requirements and the expectations as identified in the standard. In addition, the audit requirements outlined in the AS9101 Standard have significantly changed the way auditors are expected to conduct audits in the aviation, space and defense industries.
2018-05-01 ...
  • May 1-2, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches how to use engineering drawings that use the International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
2018-04-30 ...
  • April 30-May 16, 2018 (6 Sessions) - Live Online
  • July 30-August 10, 2018 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Failure Modes and Effects Analysis (FMEA) is an integral part of product design activity applicable to any type of product or service. It is a qualitative and quantitative step-by-step approach for identifying and analyzing all actual and potential points of failure in a design, product or service. A successful team-based FMEA activity can use their collective experience with similar products to dramatically improve not only product performance but also reduce manufacturing issues at both a component and system and processing level. This web seminar introduces the five basic types of FMEAs with emphasis on constructing a Design FMEA.
2018-04-25 ...
  • April 25-27, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • July 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • November 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
Training / Education Classroom Seminars
Certifying an aircraft, part or appliance can be challenging while navigating the maze of Federal Aviation Administration (FAA) procedures, rules, policies and guidelines. This course will help you to the understand the FAA organizational structure, it’s policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals, and provide you with a competitive edge and potential reduction in time in obtaining an FAA approval.
2018-04-25 ...
  • April 25-27, 2018 (2 Sessions) - Live Online
Training / Education Online Web Seminars
In recent years, total annual United States patent grants have increased to over 300,000, while patent infringement lawsuit filings have exceeded 6,000 per year. Only a small fraction of granted patents ever end up in litigation. Of the many causes for the disparity is the growing awareness and sensitivity of companies to patent infringement risk management practices. This course addresses a number of those practices (and tools for implementing the practices), placing them into context, and providing a practical overview for how to implement them to help reduce the prospect of patent infringement litigation.
2018-04-17 ...
  • April 17-May 1, 2018 (5 Sessions) - Live Online
  • August 7-21, 2018 (5 Sessions) - Live Online
Training / Education Online Web Seminars
Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. This five-session course will summarize the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.
2018-04-12 ...
  • April 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 20-21, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 4-5, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Product development is organizationally a complex undertaking that requires effective coordination within a company and between companies. During product development, teams are confronted with a number of ongoing organizational challenges and there is a high potential for conflict between participants in the process. This course addresses teamwork and other "soft-side" factors that largely determine whether product development programs are successfully completed on schedule. The content is relevant for both OEMs and suppliers.
2018-04-12 ...
  • April 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
Failure Mode and Effects Analysis (FMEA) is a systematic method for preventing failure through the discovery and mitigation of potential failure modes and their cause mechanisms. Actions are developed in a team environment and address each high: severity, occurrence or detection ranking indicated by the analysis. Completed FMEA actions result in improved product performance, reduced warranty and increased product quality.
2018-04-08 ...
  • April 8, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
It is a well-known fact that the number of women in science, engineering and business fields is growing, yet men continue to outnumber women, especially at the upper levels of these professions. Many women appear to encounter a series of challenges at early or midcareer stages that contribute to them leaving their careers prematurely due to feelings of isolation, an unsupportive work environment, extreme work schedules, and unclear rules about advancement and success.
2018-04-04 ...
  • April 4-6, 2018 (2 Sessions) - Live Online
Training / Education Online Web Seminars
In today's economic environment, patents have become an increasingly important asset for both individuals and corporations. More and more, individuals and corporations, including those in the automotive and aerospace industries, are recognizing the economic importance of patent rights, whether those rights consist of a single patent, a family of patents or an entire portfolio. Indeed, some companies do not make or sell products; their entire revenue is derived from the licensing of their patents. Suffice it to say, licensing revenue has become a significant source of value in the global intellectual property economy.
2018-03-21 ...
  • March 21-22, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • May 23-24, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • September 10-11, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
The requirements of the AS9120, Rev. B, EN9120B and JIAQ9120B Standards have significantly changed and are based on the NEW ISO9001:2015 Standard. This two-day training program is designed to provide individuals with the knowledge necessary to understand and comprehend the NEW requirements described in AS9120 Rev. B, Quality Management Systems – Requirements for Aviation, Space, and Defense Distributors. The course includes classroom instruction combined with class exercises to further reinforce concepts and definitions now required by the standard.
2018-03-12 ...
  • March 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 13-14, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Signal processing has become a critical tool in optimizing vehicle noise. This seminar will help you to understand the foundation common to all NVH data acquisition equipment including digitizing, windows, aliasing, averaging techniques, and common analysis functions such as the power spectrum, transfer function and coherence. Fundamental concepts such as filtering, modulation, convolution, and correlation, as well as specialized techniques used in rotating machinery such as adaptive re-sampling and order tracking, will be covered.
2018-03-07 ...
  • March 7-8, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 20-21, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2018-03-06 ...
  • March 6-9, 2018 (8:30 a.m. - 4:30 p.m.) - Herndon, Virginia
  • August 13-16, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
  • December 4-7, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • December 4-7, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
Training / Education Classroom Seminars
The skills and knowledge gained in this workshop will enable students to carry out regulatory responsibilities related to the administration of the Aircraft Certification and Continued Operational Safety. This course content provides the Civil Aviation Safety Engineers (Systems – Electrical) with the knowledge and skills to conduct oversight of aviation safety, aircraft certification and Continued Operational Safety.
2018-03-05 ...
  • March 5-6, 2018 (8:30 a.m. - 4:30 p.m.) - Herndon, Virginia
Training / Education Classroom Seminars
Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of aircraft accident investigation and reconstruction methodology and processes is critical to success in this supportive role. This two-day seminar will begin with the basic requirements for conducting proper accident investigations, including investigative philosophies and procedures.
2018-02-19 ...
  • February 19-March 7, 2018 (8 Sessions) - Live Online
  • September 10-26, 2018 (8 Sessions) - Live Online
Training / Education Online Web Seminars
Geometric dimensioning and tolerancing (GD&T) is used as a symbolic way of showing specific tolerances on drawings. GD&T is a valuable tool that effectively communicates the design intent to manufacturing and inspection. It is governed by the technical standard ASME Y14.5M-2009. This course introduces participants to the GD&T system, providing a working knowledge of the correct interpretation and application of each symbol, general rules, the datum system, and 'bonus' tolerance and highlighting some of the changes in the updated Y14.5 standard. The material is reinforced with many practice exercises.
2018-02-19 ...
  • February 19-28, 2018 (4 Sessions) - Live Online
  • April 18-27, 2018 (4 Sessions) - Live Online
  • October 16-25, 2018 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Tough times require searching for things that we can change and making them better. But so often problems are solved with 'band-aids' and not root cause solutions. This approach is getting too expensive and at best only helps companies tread water. To combat these issues and adopt a fresh approach, teams can use the methods and tools of Root Cause Problem Solving to first view problems as opportunities for improvement, identify root causes and implement solutions to prevent recurrence. Benefits include improved quality and customer satisfaction, reduced operation costs, and greater employee knowledge of work processes.
2018-02-12 ...
  • February 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • October 11-12, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2018-02-12 ...
  • February 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • July 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • November 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
Training / Education Classroom Seminars
Part 21 is the FAA regulation that provides the regulatory framework to conduct certification of products and parts. This includes the engineering, airworthiness, production and quality systems. The aerospace industry is hinged around compliance with Part 21; however, comprehension of Part 21 and its role in civil certification is challenging. This course is designed to provide participants with an understanding of the processes that encompass aircraft certification, including compliance with FARs, certification procedures and post certification responsibilities.
Viewing 1 to 30 of 148