Criteria

Text:
Display:

Results

Viewing 211 to 240 of 485
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches an introduction to how to inspect GD&T requirements. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems). Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches an introduction to functional gaging design and how to verify part dimensional requirements using functional gages and other measurement methods. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education Classroom Seminars
Providing you have an understanding of tolerance stacks, this course teaches an introduction to statistical tolerance stacks, a crucial skill in today’s competitive workplace. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course includes a brief overview of several terms used in statistical stacks. It explains four methods for applying statistics to tolerance stacks and covers precautions about when and how to use statistics in stacks. Newly acquired learning is reinforced throughout the class with stacks that allow the student to practice applying statistical methods.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the significant revisions, additions, and deletions prescribed in the new ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of new features in the 2009 standard and compares them to the 1994 Standard. Newly acquired learning is reinforced throughout the class with numerous practice problems, and a set of comprehensive comparison charts that highlight itemized changes in the standard are included in the workshop price.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
Quality Function Deployment (QFD) is a cross functional, team based methodology recognized as a key technique in improving new product/service design and development. It is especially useful to translate both spoken and unspoken customer needs into a prioritized set of customer product or service characteristics in a language understandable to an organization’s engineering design group. And, by using a cascading approach, it ensures that the design intent is maintained throughout the production planning process and that the design intent is traceable both up and down the product/process planning effort.
Training / Education Classroom Seminars
This seminar covers the five types of FMEAs with emphasis on constructing Design and Process FMEAs. Each column of the FMEA document will be clearly explained using an actual FMEA example. The course covers various methods for identifying failure modes, effects and causes with special attention given to severity, occurrence, and detection tables and how to develop effective recommended actions strategies. Throughout the class, participants will be involved in exercises/actual projects that demonstrate and incorporate direct application of learned principles.
Training / Education Classroom Seminars
May 15-19, 2017 July 10-14, 2017 November 6-10, 2017 Mobile Comply 7205 Sterling Ponds Court Sterling Heights, MI Connected Vehicle Professional I - Function, Protocols and Architecture will focus on connected vehicle application concepts and vision, performance functions, communication protocols, hardware architecture components and software architecture methodologies within the connected vehicle ecosystems. To ensure a globally informed awareness, learners will be presented with in-depth wide ranging course materials, suggested domestic and internationally source reading resources, and tested on various key areas of instruction.
Training / Education Classroom Seminars
This four hour short course will provide an overview of the airworthiness certification process and the role of the FAA Designated Engineering Representative (DER) and Authorized Representative (AR). This seminar will provide insight into the type design, minor/ major Changes, FAA conformity process, and test witnessing. It also provides familiarity with FAA forms.
Training / Education Classroom Seminars
This course provides an introduction to basic tire mechanics, including materials, sidewall stampings, pressure, tread patterns, tire inspection and basic tire failure identification of passenger and light truck tires. Practical in nature and supplemented with samples and hands-on activities, the course will provide you with information that you can use immediately on-the-job and apply to your own vehicle. It serves as a good primer for the in-depth SAE Tire Forensic Analysis course. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 7 Continuing Education Units (CEUs).
Training / Education Classroom Seminars
This course provides a detailed description of tire failure modes, their potential causes, identification, and the sometimes subtle nuances that go along with determination of tire failure. In addition, proper inspection techniques of tires will be discussed and samples will be available to reinforce the concepts learned. The book, Tire Forensic Investigation, authored by the instructor, is included with the course materials. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 13 Continuing Education Units (CEUs).
Anytime
Training / Education On Demand Web Seminar RePlay
Failure Modes and Effects Analysis (FMEA) is an integral part of product design activity applicable to any type of product or service. It is a quantitative and quantitative step-by-step approach for identifying and analyzing all actual and potential points of failure in a design, product or service. A successful team-based FMEA activity can use their collective experience with similar products to dramatically improve not only product performance but also reduce manufacturing issues at both a component and system and processing level. This web seminar introduces the five basic types of FMEAs with emphasis on constructing a Design FMEA.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barbara, CA. This 4 hour short course will provide an overview of the hydraulic components used on aircraft. There will be a brief overview of hydraulics, aircraft hydraulic systems, and aircraft flight controls. You will learn the function of each component used within the hydraulic system, and then look in depth at each component’s design.
Training / Education Classroom Seminars
This 4 hour short course offers an overview of aircraft hydraulic pumps focusing on their application in hydraulic systems, design and performance characteristics, and integration issues. These topics will examine the various pump technologies available for aircraft system applications, their design, performance and operational characteristics and limitations, and discuss the challenges and lessons learned in the integration of pumps in hydraulic systems.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barbara, CA. This 4 hour short course provides an overview of Power Electronics (PE) in use in modern transport aircraft. This course includes the context, principles, design drivers, and the main PE components of various flight applications, including those for harsh environments.
Training / Education
Something about Industrial Metallurgy
Training / Education
Ford Motor Company and SAE International provide a series of Ford online training courses on powertrain and problem-solving topics to extend Ford engineering knowledge across the global industry.
Training / Education
Learn at your own pace - access Professional Development seminars in full-motion video from your desktop! Convenient and portable, save the expense of travel and time away from the workplace with your favorite engineering education online, whenever and wherever you need it.
Training / Education
Presented in a 10-120 minute format, these chunks of learning combine audio, video, graphics, photos and text to capture the essence of a topic and drive a defined set of outcomes.
Training / Education
Something about DAU
Training / Education
The web seminar replays library features a list of select SAE web seminars that are archived and posted following a live offering. You will receive the same instruction, workbook, learning assessment and ANSI/IACET CEUs through a personal, online account in the SAE Learning Center. Replays are streamed in Adobe Flash Video format (.flv) and are best viewed on an audio-capable PC.
Training / Education
SAE Continuing Education Programs and Tools, SAE Professional Development
Training / Education
SAE Continuing Education Programs and Tools, SAE Professional Development
Training / Education
SAE Continuing Education Programs and Tools, SAE Professional Development
Viewing 211 to 240 of 485