Criteria

Text:
Display:

Results

Viewing 151 to 180 of 480
2017-12-18 ...
  • December 18-20, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • May 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Public awareness regarding pollutants and their adverse health effects has created an urgent need for engineers to better understand the combustion process as well as the pollutants formed as by-products of that process. To effectively contribute to emission control strategies and design and develop emission control systems and components, a good understanding of the physical and mathematical principles of the combustion process is necessary. This seminar will bring issues related to combustion and emissions "down to earth," relying less on mathematical terms and more on physical explanations and analogies.
2017-12-14 ...
  • December 14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 3, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 30, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 13, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This highly interactive workshop focuses training on negotiation strategy and skills. This is not the manipulative, win-lose negotiation approach frequently taught today, where the “winner” eventually spends time and effort protecting his negotiated advantage against erosion, while the “loser” continually exploits loopholes and shortcuts to recover lost ground. Traditional negotiation is a wary dance based on mistrust, the true cost of which is lost in quality and brain fatigue – usually for someone other than the negotiator – over the life of the agreement.
2017-12-13 ...
  • December 13-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Photographs and video recordings of vehicle crashes and accident sites are more prevalent than ever, with dash mounted cameras, surveillance footage, and personal cell phones now ubiquitous. The information contained in these pictures and video provide critical information to understanding how crashes occurred, and in analyzing physical evidence. This course teaches the theory and techniques for getting the most out of digital media, including correctly processing raw video and photographs, correcting for lens distortion, and using photogrammetric techniques to convert the information in digital media to usable scaled three-dimensional data.
2017-12-12 ...
  • December 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
  • March 5-6, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • June 18-19, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
Individuals responsible for quality management system, implementation, and transition to the AS9100:2016 series of standards for Aviation, Space, and Defense will require an understanding of the requirements for the preparation and execution of the audit process as defined in these revised standards. Management and implementers of AS9100:2016 Rev. D within these organizations must also be aware of what these changes may mean for their company.
2017-12-11 ...
  • December 11-13, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
2017-12-07 ...
  • December 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 25-26, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include identifying proper design dimensions and tolerances, achieving robust designs, generating predictive math models that describe physical system behavior, and determining ideal manufacturing settings. This seminar utilizes hands-on activities to help you learn the criteria for running a DOE, the requirements and pre-work necessary prior to DOE execution, and how to select the appropriate designed experiment type to run.
2017-12-06 ...
  • December 6-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 6-8, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar will present an introduction to Vehicle Dynamics from a vehicle system perspective. The theory and applications are associated with the interaction and performance balance between the powertrain, brakes, steering, suspensions and wheel and tire vehicle subsystems. The role that vehicle dynamics can and should play in effective automotive chassis development and the information and technology flow from vehicle system to subsystem to piece-part is integrated into the presentation. Governing equations of motion are developed and solved for both steady and transient conditions.
2017-12-06 ...
  • December 6, 2017 (2 Sessions) - Live Online
  • February 19-23, 2018 (2 Sessions) - Live Online
  • July 9-10, 2018 (2 Sessions) - Live Online
  • December 17-19, 2018 (2 Sessions) - Live Online
Training / Education Online Web Seminars
In a global economy, aviation, space and defense organizations are presented the challenge of producing and delivering safe and reliable products across a wide range of customer requirements and expectations. In an effort to address diverse quality requirements and expectations while also reducing costs throughout the supply chain, the SAE AS9100 family of standards was developed by international aerospace industry representatives to standardize international aerospace quality management system requirements.
2017-12-05 ...
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • February 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • April 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • August 7-9, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • December 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2017-12-05 ...
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • April 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
  • August 6-8, 2018 (8:30 a.m. - 4:30 p.m.) - Herndon, Virginia
  • November 5-7, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
Training / Education Classroom Seminars
Crash reconstruction utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash to determine how and why the crash occurred. This course will cover basic principles and approaches to accident reconstruction (breaking the analysis down into phases, for instance). Methods of evidence documentation will be covered.
2017-12-05 ...
  • December 5-14, 2017 (4 Sessions) - Live Online
  • July 11-20, 2018 (4 Sessions) - Live Online
  • December 11-20, 2018 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Analysis of tolerance stacks varies widely. This web seminar introduces the basic tools to create a common methodology for tolerance stack-ups, and ensure seamless documentation. Participants will create 1-D tolerance stacks for parts and assemblies that use geometric dimensioning and tolerancing using a tolerance stack spreadsheet. This simple, manual spreadsheet method produces an easily interpreted and checked documentation trail, and is easily adaptable to common electronic spreadsheet programs. Multiple examples will be provided to assist engineers in applying tolerance stack-up fundamentals to Y14.5 issues.
2017-12-04 ...
  • December 4-6, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2017-12-04 ...
  • December 4-6, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • May 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • August 6-8, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 3-5, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Starting with a look at the transmission's primary function -- to couple the engine to the driveline and provide torque ratios between the two -- this updated and expanded seminar covers the latest transmission systems designed to achieve the most efficient engine operation. Current designs, the components and sub-systems used, their functional modes, how they operate, and the inter-relationships will be discussed. A manual transmission display will be used to explain ratios and how they function within the driveline.
2017-12-04 ...
  • December 4-5, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
  • August 30-31, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
Training / Education Classroom Seminars
The requirements for producing an FAA approved replacement part can be daunting. Understanding the steps required in the FAA Parts Manufacturer Approval (PMA) process can greatly streamline the approval life-cycle and reduce unnecessary costs and delays, thereby shortening the time and cost to market. This course is designed for those organizations and individuals interested in designing and manufacturing replacement parts for civil aviation aircraft. This two-day course covers the crucial subjects and steps of the FAA-PMA approval process.
2017-12-04 ...
  • December 4-8, 2017 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
  • December 18-22, 2017 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
  • December 3-7, 2018 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
SAE Engineering Academies provide comprehensive and immersive training experiences, helping new and re-assigned engineers become proficient and productive in a short period of time. The Hybrid and Electric Vehicle Engineering Academy covers hybrid and electric vehicle engineering concepts, theory, and applications relevant to HEV, PHEV, EREV, and BEV for the passenger car industry. While the theory and concepts readily apply to the commercial vehicle industry as well, the examples and applications used will apply primarily to the passenger car industry.
2017-12-04 ...
  • December 4-15, 2017 (6 Sessions) - Live Online
  • June 11-22, 2018 (6 Sessions) - Live Online
  • November 28-December 10, 2018 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Finite Element Analysis (FEA) has been used by engineers as a design tool in new product development since the early 1990's. Until recently, most FEA applications have been limited to static analysis due to the cost and complexity of advanced types of analyses. Progress in the commercial FEA software and in computing hardware has now made it practical to use advanced types as an everyday design tool of design engineers. In addition, competitive pressures and quality requirements demand a more in-depth understanding of product behavior under real life loading conditions.
2017-12-04 ...
  • December 4-5, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • February 21-22, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 22-23, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 6-7, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The design and development of vehicle suspensions significantly influences vehicle handling and ride comfort. Suspension system design excellence follows the basic laws of physics using design synthesis techniques, a methodical process for suspension geometry development. Suspension geometry is the foundation of vehicle performance from which high-confidence suspension components and tunings can be developed. Suspension component design continues to move toward mass and cost efficient designs with high levels of stiffness being essential to achieving design requirements.
2017-12-04 ...
  • December 4-7, 2017 (3 Sessions) - Live Online
  • June 4-8, 2018 (3 Sessions) - Live Online
  • November 27-30, 2018 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Design Review Based on Failure Modes (DRBFM) is a methodology focused on change management and continuous improvement. It centers on early prevention and engineering knowledge, eliminating time spent debating ranking systems, waiting for lead engineers to document and list their concerns, identifying what types of concerns are open for discussion and resolution, and brainstorming without any actionable closure. This web seminar will explain all phases of the DRBFM methodology and provide details on how to accomplish the specific steps.
2017-11-29 ...
  • November 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • June 18-19, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 27-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 28-29, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today. This seminar will bring these techniques together in an easy to understand format that goes beyond the typical concept of constructing timelines and project planning, by exploring not only the Automotive APQP process, but also key aspects of PM processes. Students will gain a solid foundation in the principles and application of Project Management and APQP.
2017-11-29 ...
  • November 29-December 1, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 28-30, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
EDR’s are not new, but are becoming more prevalent in part due to a new federal regulation. 49 CFR, Part 563, which affects vehicles produced after September 30, 2012, will result in a standardized and publicly available EDR in 90% of new vehicles. Accident Reconstructionists frequently have trouble reconciling EDR data with other data sources, and improvements in ABS technology result in fewer tire marks visible at the scene of crashes to allow calculation of pre-crash speeds without an EDR.
2017-11-28 ...
  • November 28-December 1, 2017 (3 Sessions) - Live Online
  • March 6-13, 2018 (3 Sessions) - Live Online
  • November 13-20, 2018 (3 Sessions) - Live Online
Training / Education Online Web Seminars
This web seminar will provide an introduction to the characteristics of sound waves, human perception of sound, sound and vibration measurements, measurement facilities, and various noise sources and noise control principles. It will include an overview of sound pressure, power, intensity, decibels, and frequencies. Practical examples will be used to familiarize participants with the acoustic fundamentals for solving noise and vibration problems and the associated solution principles.
2017-11-28 ...
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Irving, Texas
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • January 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Cerritos, California
  • January 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • January 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • January 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • January 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • January 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • January 30-February 1, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • January 30-February 1, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • January 30-February 1, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • February 5-7, 2018 (8:30 a.m. - 4:30 p.m.) - Birmingham, United Kingdom
  • February 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • February 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - Las Vegas, Nevada
  • February 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • February 21-23, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • February 27-March 1, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • March 6-8, 2018 (8:30 a.m. - 4:30 p.m.) - Toronto, Ontario
  • March 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • March 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Munich, Germany
  • March 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Singapore, Singapore
  • March 19-21, 2018 (8:30 a.m. - 4:30 p.m.) - Paris, France
  • March 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • March 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • March 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • March 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • March 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • April 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Milan, Italy
  • April 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • April 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • April 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • April 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Birmingham, United Kingdom
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • May 1-3, 2018 (8:30 a.m. - 4:30 p.m.) - St Louis Park, Minnesota
  • May 8-10, 2018 (8:30 a.m. - 4:30 p.m.) - Nashville, Tennessee
  • May 8-10, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Mexico City, Mexico
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Tokyo, Japan
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • May 22-24, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • May 22-24, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • June 5-7, 2018 (8:30 a.m. - 4:30 p.m.) - Montreal, Quebec
  • June 12-14, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • June 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Paris, France
  • June 19-21, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • June 26-28, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • July 3-5, 2018 (8:30 a.m. - 4:30 p.m.) - Taipei City, Taiwan
  • July 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Nashville, Tennessee
  • July 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • July 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - Munich, Germany
  • July 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • July 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • July 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • August 7-9, 2018 (8:30 a.m. - 4:30 p.m.) - St Louis Park, Minnesota
  • August 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • August 21-23, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • August 28-30, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • September 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • September 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Toronto, Ontario
  • September 12-14, 2018 (8:30 a.m. - 4:30 p.m.) - Birmingham, United Kingdom
  • September 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • September 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • September 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Madrid, Spain
  • September 25-27, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • September 25-27, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • October 1-3, 2018 (8:30 a.m. - 4:30 p.m.) - Milan, Italy
  • October 8-10, 2018 (8:30 a.m. - 4:30 p.m.) - Pøívoz, Czech Republic
  • October 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • October 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • October 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - Munich, Germany
  • October 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • October 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 22-24, 2018 (8:30 a.m. - 4:30 p.m.) - Paris, France
  • October 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • October 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Las Vegas, Nevada
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • November 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Mexico City, Mexico
  • November 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • November 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • November 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • November 21-23, 2018 (8:30 a.m. - 4:30 p.m.) - Birmingham, United Kingdom
  • November 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • November 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • December 3-5, 2018 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
  • December 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • December 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Montréal, Quebec
  • December 5-7, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • December 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • December 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
Training / Education Classroom Seminars
**Delivery Language is English unless noted above in the 'Delivered In' column.** In the aerospace industry, delegated product release is a process whereby a supplier has been provided the authority to act on behalf of a delegating organization to verify and release products without additional oversight from that delegating organization. Currently, each of these delegating organizations manages and conducts a unique training program for individuals responsible for their product release overcheck process. For suppliers producing products for multiple delegating organizations, each must then manage the multiple training requirements.
2017-11-27 ...
  • November 27-December 1, 2017 (3 Sessions) - Live Online
  • February 12-16, 2018 (3 Sessions) - Live Online
  • June 18-22, 2018 (3 Sessions) - Live Online
  • December 12-19, 2018 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Connected vehicles are increasingly seen as a target for cybersecurity attacks. A key differentiator for the automotive industry is the use of cyber-physical systems, where a successful cybersecurity attack can affect physical entities. Often involving embedded electronics and real time control, these systems require different solutions in addition to established IT security principles and reactive responses to threats. Cybersecurity needs to be designed and built into cyber-physical systems throughout the development lifecycle to provide defense in depth.
Anytime
Training / Education On Demand On Demand Course
This exciting five-part series focuses on the extensive research, CEO interviews and corporate engagements of Jason Jennings and Laurence Houghton. Their team has observed and documented the lives of successful leaders. Now these ideas, and valuable practices, have been converted to high-impact elearning as a “Front Row Seat” for managers and leaders – especially new managers and leaders who have great knowledge and technical ability but have not had the opportunity to learn “first hand” from the best in the world.
Anytime
Training / Education On Demand On Demand Course
Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.
Anytime
Training / Education On Demand On Demand Course
Are you spending your work time where you should? To be effective and efficient requires thinking, teaming, and tactical skills. How are you using your skills and building those you need to successfully execute in your leadership role? Based on the book by bestselling author and award-winning speaker Laura Stack, Doing the Right Things Right: How the Effective Executive Spends Time, this course focuses on how today's leaders and managers can obtain profitable, productive results by managing the intersection of two critical values: effectiveness and efficiency.
Anytime
Training / Education On Demand On Demand Course
Many companies are starting to recognize the benefits additive manufacturing (AM) offers in terms of speed, simplicity, reliability, and cost. Additive manufacturing is a process in which a three-dimensional computer model design is built into a physical object by joining thin layers of material. AM is a versatile field that encompasses a variety of methods, materials, and applications. These classes explain the fundamental concepts of additive manufacturing, including the main principles behind AM and the safety precautions to take during the process.
Anytime
Training / Education On Demand Metallurgy Online Course
Electroplating involves the deposition of thin layers of metal on metal components and metal stock. There are several uses for electrodeposited coatings including cosmetic, corrosion resistance, and wear resistance. Knowledge about electroplating and electroplated coatings is important for product design, preventing and solving quality problems, and evaluating supplier capabilities and quality.
Anytime
Training / Education On Demand Metallurgy Online Course
There are a wide variety of wrought aluminum alloys, each developed to provide specific properties. Getting the strength you need in an aluminum alloy requires knowledge of the effects of alloy composition, cold-working, and heat treating on aluminum metallurgy and properties. A good understanding of how aluminum alloys behave and what can be done to modify their properties is critical for being more productive and profitable. The course takes about one hour to complete and consists of one module and a final exam. Also, quizzes and problems give you opportunities to apply the concepts taught.
Anytime
Training / Education On Demand On Demand Course
Stuff happens. Maybe your team responds to an idea in a way you never expected. Maybe the people who were supposed to show up didn’t. Maybe a colleague expresses concern with your leadership style. Maybe someone finds a serious error in the report. We all experience surprises. What if you could meet these surprises with ease and confidence? And what if you could create, through your own personal presence, space for more positive, collaborative engagements between people? You can when you adopt the mindset of an improv actor!
Viewing 151 to 180 of 480