Criteria

Text:
Display:

Results

Viewing 121 to 150 of 473
2017-10-03 ...
  • October 3-4, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 27-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 3-4, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
As diesel engines become more popular, a fundamental knowledge of diesel technology is critical for anyone involved in the diesel engine support industry. This course will explain the fundamental technology of diesel engines starting with a short but thorough introduction of the diesel combustion cycle, and continue with aspects of engine design, emission control design, and more. An overview of developing technologies for the future with a comprehensive section on exhaust aftertreatment is also included. The text, Diesel Emissions and Their Control, authored by Magdi Khair and W. Addy Majewski is included with the seminar.
2017-10-02 ...
  • October 2-6, 2017 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Engineering Academy covers a variety of vehicle noise control engineering principles and practices. Two specialty tracks are available: Vehicle Interior Noise and Powertrain Noise. While the Powertrain Noise track focuses on NVH issues generated by powertrain noise sources and the design strategies to minimize them, the Vehicle Interior Noise track focuses on the understanding and application of acoustical materials to optimize NVH in the passenger or operator compartment of a vehicle. Considerable attention is given to current measurement and instrumentation technologies and their effective use.
2017-10-02 ...
  • October 2-6, 2017 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Engineering Academy covers a variety of vehicle noise control engineering principles and practices. Two specialty tracks are available: Vehicle Interior Noise and Powertrain Noise. While the Vehicle Interior Noise track focuses on the understanding and application of acoustical materials to optimize NVH in the passenger or operator compartment of a vehicle, the Powertrain Noise track focuses on NVH issues generated by powertrain noise sources and the design strategies to minimize them. Noise sources include engines, transmissions/transfer cases, accessories, exhaust, gears, axles, joints, and couplings.
2017-09-29 ...
  • September 29, 2017 (8:30 a.m. - 4:30 p.m.) - Orlando, Florida
  • June 7, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 8, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This seminar covers these facets of tire safety phenomena.
2017-09-28 ...
  • September 28, 2017 (8:30 a.m. - 4:30 p.m.) - Orlando, Florida
  • April 8, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 18, 2018 (8:30 a.m. - 4:30 p.m.) - Palm Desert, California
Training / Education Classroom Seminars
The choice of brake friction materials varies per application, but each must have the appropriate coefficient of friction and be able to disperse large amounts of heat without adversely effecting braking performance. This seminar will provide an introduction to brake lining raw materials and formulation, manufacturing, quality control and testing. The course covers the critical elements that must be reviewed before arriving at a lining selection decision. Different classes of friction material and their use will be defined.
2017-09-28 ...
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Fort Worth, Texas
  • March 5-6, 2018 (8:30 a.m. - 4:30 p.m.) - Herndon, Virginia
Training / Education Classroom Seminars
Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of aircraft accident investigation and reconstruction methodology and processes is critical to success in this supportive role. This two-day seminar will begin with the basic requirements for conducting proper accident investigations, including investigative philosophies and procedures.
2017-09-28 ...
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry. Details on how the CAN protocol and other standards (J2411, J2284, J1939, ISO 11898, etc.) complement each other will be presented. Attendees will learn about CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces.
2017-09-28 ...
  • September 28, 2017 (8:30 a.m. - 4:30 p.m.) - Orlando, Florida
  • June 6, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 7, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The principal functions of the pneumatic tire are to generate driving, braking, and cornering forces while safely carrying the vehicle load and providing adequate levels of ride comfort. This seminar explains how tire forces and moments are generated under different operating and service conditions and, in turn, demonstrates how these forces and moments influence various vehicle responses such as braking, handling, ride, and high-speed performance. The content focuses on the fundamentals of tire behavior in automobiles, trucks, and farm tractors, but also includes experimental and empirical results, when necessary.
2017-09-28 ...
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
  • October 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • November 13-14, 2017 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
  • February 5-6, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • July 16-17, 2018 (8:30 a.m. - 4:30 p.m.) - Greenville, South Carolina
Training / Education Classroom Seminars
ARP4754A substantially revises the industry guidance for the development of aircraft and aircraft systems while taking into account the overall aircraft operating environment and functions. This development process includes validation of requirements and verification of the design implementation for certification and product assurance. ARP4754A provides the practices for showing compliance with regulations and serves to assist companies in developing and meeting its own internal standards though application of the described guidelines.
2017-09-27 ...
  • September 27-29, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The need to control emissions and maintain fuel economy is driving the use of advanced turbocharging technology in both diesel and gasoline engines. As the use of diesel engines in passenger car gasoline and diesel engines increases, a greater focus on advanced turbocharging technology is emerging in an effort to reap the benefits obtained from turbocharging and engine downsizing. This seminar covers the basic concepts of turbocharging of gasoline and diesel engines (light and heavy duty), including turbocharger matching and charge air and EGR cooling, as well as associated controls.
2017-09-27 ...
  • September 27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 2, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 26, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar provides an introduction to the fundamental concepts and evolution of passenger car and light truck 4x4/all-wheel drive (AWD) systems including the nomenclature utilized to describe these systems. Basic power transfer unit and transfer case design parameters, component application to system function, the future of AWD systems, and emerging technologies that may enable future systems are covered. This course is an excellent follow-up to the "A Familiarization of Drivetrain Components" seminar (which is designed for those who have limited experience with the total drivetrain).
2017-09-27 ...
  • September 27-29, 2017 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • October 31-November 2, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
Training / Education Classroom Seminars
Internal audits (a requirement of the AS9100 Rev D Standard) are intended to verify the compliance and effectiveness of the organization's quality management system. Internal auditors must be knowledgeable of these requirements and the expectations as identified in the standard. In addition, the audit requirements outlined in the AS9101 Standard have significantly changed the way auditors are expected to conduct audits in the aviation, space and defense industries.
2017-09-25 ...
  • September 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Santiago de Quer, Mexico
  • September 26-28, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • October 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Cardano Al Campo, Italy
  • October 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • October 10-12, 2017 (8:30 a.m. - 4:30 p.m.) - Monterrey, Mexico
  • October 10-12, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 10-12, 2017 (8:30 a.m. - 4:30 p.m.) - Wolverhampton, United Kingdom
  • October 17-19, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - Munich, Germany
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 31-November 2, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • October 31-November 2, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • November 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • November 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Miami, Florida
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Irving, Texas
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • January 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Cerritos, California
  • January 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • January 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • January 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • January 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • January 30-February 1, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • February 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • February 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - Las Vegas, Nevada
  • February 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • March 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • March 20-22, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • March 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • March 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • April 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • April 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • April 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • May 1-3, 2018 (8:30 a.m. - 4:30 p.m.) - St Louis Park, Minnesota
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Mexico City, Mexico
  • May 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • May 22-24, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • June 12-14, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • June 26-28, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • July 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Nashville, Tennessee
  • July 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • July 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • July 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • July 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • July 31-August 2, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • August 7-9, 2018 (8:30 a.m. - 4:30 p.m.) - St Louis Park, Minnesota
  • August 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • August 21-23, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • September 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • September 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Toronto, Ontario
  • September 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • September 25-27, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • October 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • October 9-11, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • October 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • October 16-18, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 23-25, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Dallas, Texas
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • October 30-November 1, 2018 (8:30 a.m. - 4:30 p.m.) - Plantation, Florida
  • November 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • November 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • November 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Bloomfield, Connecticut
  • November 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
  • December 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • December 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Montréal, Quebec
  • December 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • December 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
Training / Education Classroom Seminars
**Delivery Language is English unless noted above in the 'Delivered In' column.** In the aerospace industry, delegated product release is a process whereby a supplier has been provided the authority to act on behalf of a delegating organization to verify and release products without additional oversight from that delegating organization. Currently, each of these delegating organizations manages and conducts a unique training program for individuals responsible for their product release overcheck process. For suppliers producing products for multiple delegating organizations, each must then manage the multiple training requirements.
2017-09-25 ...
  • September 25-29, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • October 16-20, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the many electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is a critical aspect of customer satisfaction and emissions certification, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in entering the field of calibration engineering through hands-on exercises and detailed instruction on the base principles of calibration.
2017-09-25 ...
  • September 25-26, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today. This seminar will bring these techniques together in an easy to understand format that goes beyond the typical concept of constructing timelines and project planning, by exploring not only the Automotive APQP process, but also key aspects of PM processes. Students will gain a solid foundation in the principles and application of Project Management and APQP.
2017-09-25 ...
  • September 25, 2017 (8:30 a.m. - 4:30 p.m.) - Garden Grove, California
  • April 13, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • September 14, 2018 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
Training / Education Classroom Seminars
On-board diagnostics, required by governmental regulations, provide a means for reducing harmful pollutants into the environment. Since being mandated in 1996, the regulations have continued to evolve and require engineers to design systems that meet strict guidelines. This one day seminar is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
2017-09-25 ...
  • September 25-26, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • February 28-March 1, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 24-25, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
An efficient, robust, and quiet running drivetrain is as essential to customer satisfaction as styling and interior creature comforts. In this seminar, you will be exposed to various methods that can be used to accomplish this goal. Designed to help you visualize both individual components and the entire drivetrain system - without reference to complicated equations - this seminar focuses on the terms, functions, nomenclature, operating characteristics and effect on vehicle performance for each of the drivetrain components.
Training / Education Online Web Seminars
Finite Element Analysis (FEA) is a powerful and well recognized tool used in the analysis of heat transfer problems. However, FEA can only analyze solid bodies and, by necessity thermal analysis with FEA is limited to conductive heat transfer. The other two types of heat transfer: convection and radiation must by approximated by boundary conditions. Modeling all three mechanisms of heat transfer without arbitrary assumption requires a combined use of FEA and Computational Fluid Dynamics (CFD).
Training / Education Online Web Seminars
Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy to use interfaces enabling design engineers to simulate problems formerly reserved for analysts. This three-session web seminar targets the FEA users who wish to explore those advanced analysis capabilities.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2017-06-27
Anytime
Training / Education On Demand On Demand Course
How do you know when there’s a problem in a given situation? Once discovered, how do you approach solving the problem? In this course, you’ll be provided basic steps for how to define a problem and an approach for solving that problem using a proven methodology. You’ll explore how a problem can be viewed as an opportunity for improvement and how a solution to a problem can be leveraged within different areas of your organization. Effective problem solving isn’t just a quality function, and it's not just for operations or engineering. Effective problem solving is a valuable skill set needed throughout an organization.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches an introduction to functional gaging design and how to verify part dimensional requirements using functional gages and other measurement methods. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of metrology, the roles of the metrologist and inspector, measurement uncertainty, inspection tools, functional gages, inspection planning and reporting, and simulating datums. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the fundamental definitions, concepts, and methods from the ASME Y14.41 Standard on Digital Product Definition Data Practices. Utilizing the expertise of world-renowned GD&T expert and former Chairman of the Y14.41 Committee, Alex Krulikowski, the course focuses on understanding the benefits of a math-based product development process. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the major differences between the ASME and ISO standards in a concise, easily understood manner. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on how the standards compare when dealing with symbols, feature control frames, tolerances, form controls, datums, and more. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of engineering drawings, this course teaches how to correctly interpret engineering drawings. It will improve a student's understanding of print reading and result in more effective communication on the job. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on practical application of print interpretation. It will give you a better understanding of the view representation, dimensions, tolerances, and symbols used on prints. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have an understanding of GD&T fundamentals, this course teaches an introduction to geometric dimensioning and tolerancing and its impact on the manufacturing process. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on the basic requirements of engineering drawings, size dimensions, form tolerances, and the datum system, as well as the impact of tolerancing requirements on production. Newly acquired learning is reinforced with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches how to use engineering drawings that use the International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the significant revisions, additions, and deletions prescribed in the new ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of new features in the 2009 standard and compares them to the 1994 Standard. Newly acquired learning is reinforced throughout the class with numerous practice problems, and a set of comprehensive comparison charts that highlight itemized changes in the standard are included in the workshop price.
2017-05-04
Anytime
Training / Education On Demand On Demand Course
How do you solve a problem? Do you find yourself using quick and easy solutions or a structured methodology? Too often, organizations tend to seek quick solutions to a problem without adequately addressing its underlying cause. These decisions often result in solutions that don’t work or aren’t sustainable, often wasting time, effort, and money. To combat these issues and adopt a fresh approach, teams can use the methods and tools of Root Cause Problem Solving.
Viewing 121 to 150 of 473