Criteria

Text:
Display:

Results

Viewing 31 to 60 of 495
2017-09-28 ...
  • September 28, 2017 (8:30 a.m. - 4:30 p.m.) - Orlando, Florida
Training / Education Classroom Seminars
The choice of brake friction materials varies per application, but each must have the appropriate coefficient of friction and be able to disperse large amounts of heat without adversely effecting braking performance. This seminar will provide an introduction to brake lining raw materials and formulation, manufacturing, quality control and testing. The course covers the critical elements that must be reviewed before arriving at a lining selection decision. Different classes of friction material and their use will be defined.
2017-09-28 ...
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Fort Worth, Texas
Training / Education Classroom Seminars
Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of aircraft accident investigation and reconstruction methodology and processes is critical to success in this supportive role. This two-day seminar will begin with the basic requirements for conducting proper accident investigations, including investigative philosophies and procedures.
2017-09-28 ...
  • September 28, 2017 (1 Session) - Live Online
Training / Education Online Web Seminars
High-voltage, high-current energy storage systems and electrical circuits in many current and future alternative-propulsion powertrains present unique challenges to the automotive industry. Care must be taken to minimize risk to all who come into contact with the vehicle throughout its development and life cycle, including powertrain developers, assembly line workers, service technicians, vehicle occupants, and first responders. Significant risk to life and limb can arise from technical issues surrounding these vehicles.
2017-09-28 ...
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Forth Worth, Texas
Training / Education Classroom Seminars
This interactive Failure Modes and Effects Analysis (FMEA) product and process seminar introduces the participant to the analytical process by which potential failure modes, failure effects and causes of failure are identified. Engaging in a systematic method of studying failure can improve future outcomes. The severity, occurrence and probability of detection of a failure mode are used to prioritize which failure modes are most critical. Methodology is introduced for dealing with the effects of failure. The Design FMEA link to manufacturing is explained and amplified in terms of downstream Process FMEA.
2017-09-28 ...
  • September 28, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
Training / Education Classroom Seminars
The challenges associated with using composites as a replacement for aluminum reside primarily in the complex manufacturing processes and technologies for fabricating composite parts. The high cost of composites material and its manufacturing complexity have been inhibitors to the wide transfer of this technology to the non-aerospace market. The search for solutions to high manufacturing costs and efficient manufacturing processes have resulted in intense research by government, aerospace industry companies, and space agencies worldwide.
2017-09-27 ...
  • September 27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar provides an introduction to the fundamental concepts and evolution of passenger car and light truck 4x4/all-wheel drive (AWD) systems including the nomenclature utilized to describe these systems. Basic power transfer unit and transfer case design parameters, component application to system function, the future of AWD systems, and emerging technologies that may enable future systems are covered. This course is an excellent follow-up to the "A Familiarization of Drivetrain Components" seminar (which is designed for those who have limited experience with the total drivetrain).
2017-09-26 ...
  • September 26, 2017 (1 Session) - Live Online
Training / Education Online Web Seminars
Hybrid powertrains have been on the market for more than a decade and have become one of the most successful alternative powertrains available today. More than a million hybrids are sold globally per year, primarily in Japan and the US. Some OEMs estimate that up to 80% of their light-duty vehicles may require some level of hybridization to meet upcoming CAFE regulations in the United States. Hybrids are also starting to make inroads into markets in Europe, and have recently been introduced to Chinese and Indian markets, among others. Basic information on hybrids is scattered among information sources, and is often difficult to synthesize.
2017-09-25 ...
  • September 25-26, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
An efficient, robust, and quiet running drivetrain is as essential to customer satisfaction as styling and interior creature comforts. In this seminar, you will be exposed to various methods that can be used to accomplish this goal. Designed to help you visualize both individual components and the entire drivetrain system - without reference to complicated equations - this seminar focuses on the terms, functions, nomenclature, operating characteristics and effect on vehicle performance for each of the drivetrain components.
2017-09-25 ...
  • September 25-29, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • October 16-20, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • November 6-10, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the many electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is a critical aspect of customer satisfaction and emissions certification, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in entering the field of calibration engineering through hands-on exercises and detailed instruction on the base principles of calibration.
2017-09-25 ...
  • September 25, 2017 (8:30 a.m. - 4:30 p.m.) - Garden Grove, California
Training / Education Classroom Seminars
On-board diagnostics, required by governmental regulations, provide a means for reducing harmful pollutants into the environment. Since being mandated in 1996, the regulations have continued to evolve and require engineers to design systems that meet strict guidelines. This one day seminar is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
2017-09-21 ...
  • September 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2017-09-18 ...
  • September 18-20, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design and development of a modern steering system influences vehicle response to steering wheel input, driver effort, comfort, safety and fuel economy. In this interactive seminar participants will analyze the steering system from the road wheel to the steering wheel. Day one will begin with a deep dive into the anatomy and architecture of the lower steering system (wheel end, suspension geometry, linkages and steering gear), its effect on vehicle response and how forces and moments at the contact patch are converted to a torque at the pinion.
2017-09-14 ...
  • September 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2017-09-13 ...
  • September 13-15, 2017 (8:30 a.m. - 4:03 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV), Plug-In Hybrid Electric Vehicle (PHEV), and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
2017-09-11 ...
  • September 11-12, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Meeting the requirements of heavy-duty engine emissions regulations is a challenge for all engine manufacturers. Since the introduction of Exhaust Gas Recirculation (EGR) in medium and heavy-duty diesel engines, these systems have become more sophisticated and tightly integrated with emission control systems. This 2-day seminar will explore the advantages and disadvantages of EGR and the most effective implementation of various EGR systems. This seminar will begin by defining EGR and why it is used in diesel engines, along with an explanation of the mechanisms by which EGR is able to reduce NOx.
2017-09-11 ...
  • September 11-15, 2017 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Designing a brake system requires the ability to balance a multitude of parameters against the required tradeoffs of system weight, system cost, and system performance. Understanding the basic fundamentals of how each brake component attribute contributes to the overall Force vs Deceleration behavior of the vehicle is critical to the design and release of a safe, legal and optimized system for today’s vehicles. Brake balance also is a contributing factor to other chassis control and safety systems, such as regenerative braking, ABS, and electronic brake distribution (EBD).
2017-09-08 ...
  • September 8-25, 2017 (8 Sessions) - Live Online
Training / Education Online Web Seminars
Geometric dimensioning and tolerancing (GD&T) is used as a symbolic way of showing specific tolerances on drawings. GD&T is a valuable tool that effectively communicates the design intent to manufacturing and inspection. It is governed by the technical standard ASME Y14.5M-2009. This course introduces participants to the GD&T system, providing a working knowledge of the correct interpretation and application of each symbol, general rules, the datum system, and 'bonus' tolerance and highlighting some of the changes in the updated Y14.5 standard. The material is reinforced with many practice exercises.
2017-09-07 ...
  • September 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2017-09-07 ...
  • September 7-19, 2017 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Any product is a collection of materials that have been manipulated into various shapes to form the components and joints used within the product. In fact, up to 70% of the cost to make a product is due to its materials. Therefore, getting the materials right will have a big impact on the success of a product.
2017-08-31 ...
  • August 31, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This highly interactive workshop focuses training on negotiation strategy and skills. This is not the manipulative, win-lose negotiation approach frequently taught today, where the “winner” eventually spends time and effort protecting his negotiated advantage against erosion, while the “loser” continually exploits loopholes and shortcuts to recover lost ground. Traditional negotiation is a wary dance based on mistrust, the true cost of which is lost in quality and brain fatigue – usually for someone other than the negotiator – over the life of the agreement.
2017-08-29 ...
  • August 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2017-08-22 ...
  • August 22-24, 2017 (2 Sessions) - Live Online
  • November 15-17, 2017 (2 Sessions) - Live Online
Training / Education Online Web Seminars
ISO 26262: Road Vehicle - Functional Safety is now becoming a condition of compliance for doing business in the automotive sector. The Scope states: “ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3,500 kg…" This course provides background for reading and applying the standard and explains its scope, the major differences from the general safety standard IEC 61508, and how the scope changes with the introduction of new systems.
2017-08-17 ...
  • August 17-18, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar provides a functional understanding of the principles involved in conducting a Design for Manufacture/Design for Assembly study. DFM/DFA can support both manual and automated processes resulting in significant cost savings through simpler designs with fewer components. Related topics include workstation layouts, ergonomic considerations and errorproofing. Actual examples from the automotive industry are used to support the lecture and participants complete actual design efficiency using the DFM/DFA worksheet.
2017-08-16 ...
  • August 16-18, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 13-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2017-08-16 ...
  • August 16, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The improved efficiencies of the modern diesel engine have led to its increased use within the mobility industry. The vast majority of these diesel engines employ a high-pressure common rail fuel injection system to increase the engine's fuel-saving potential, emissions reduction, and overall performance. This one-day seminar will begin with a review of the basic principles of diesel engines and fuel injection systems. Diesel and alternative fuels will be discussed, followed by current and emerging diesel engine applications.
2017-08-15 ...
  • August 15-16, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Stringent requirements of reduced NOx emission limits in the US have presented engineers and technical staff with numerous challenges. Several in-cylinder technical solutions have been developed for diesel engines to meet 2010 emission standards. These technologies have been optimized and have yielded impressive engine-out results in their ability to reduce emissions to extremely low levels. However, current and state-of-the-art in-cylinder solutions have fallen short of achieving the limits imposed on diesel emissions for 2010.
2017-08-15 ...
  • August 15-17, 2017 (2 Sessions) - Live Online
Training / Education Online Web Seminars
This web seminar provides an in-depth overview of diesel engine noise including combustion and mechanical noise sources. In addition, the instructor will discuss a system approach to automotive integration including combining sub-systems and components to achieve overall vehicle noise and vibration goals.
2017-08-10 ...
  • August 10-11, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Through informative discussions and detailed explanations, this seminar will provide a solid and fundamental understanding of gear geometry, types and arrangements, and design principles. Starting with the basic definitions of gears, conjugate motion, and the Laws of Gearing, those attending will be given the tools needed to understand the inter-relation and coordinated motion operating within gear pairs and multi-gear trains. Basic gear system design process and gear measurement and inspection techniques will also be explained.
2017-08-07 ...
  • August 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 4-6, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Starting with a look at the transmission's primary function -- to couple the engine to the driveline and provide torque ratios between the two -- this updated and expanded seminar covers the latest transmission systems designed to achieve the most efficient engine operation. Current designs, the components and sub-systems used, their functional modes, how they operate, and the inter-relationships will be discussed. A manual transmission display will be used to explain ratios and how they function within the driveline.
2017-08-07 ...
  • August 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The quest for more efficient, smarter, and environmentally cleaner liquid-fueled spark ignition (SI) reciprocating engines is more alive and intense now than ever before. GDI SI engines have overcome many of the original limitations and are now becoming commonplace. This seminar will provide a comprehensive overview of GDI engines.
Viewing 31 to 60 of 495