Criteria

Text:
Display:

Results

Viewing 1 to 30 of 507
2018-12-03 ...
  • December 3-7, 2018 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
SAE Engineering Academies provide comprehensive and immersive training experiences, helping new and re-assigned engineers become proficient and productive in a short period of time. The Hybrid and Electric Vehicle Engineering Academy covers hybrid and electric vehicle engineering concepts, theory, and applications relevant to HEV, PHEV, EREV, and BEV for the passenger car industry. While the theory and concepts readily apply to the commercial vehicle industry as well, the examples and applications used will apply primarily to the passenger car industry.
2018-11-26 ...
  • November 26-27, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Attendees discover the importance of knowing their audiences and how to communicate technical information in a "user-friendly" style.
2018-11-08 ...
  • November 8, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have an understanding of tolerance stacks, this course teaches an introduction to statistical tolerance stacks, a crucial skill in today’s competitive workplace. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course includes a brief overview of several terms used in statistical stacks. It explains four methods for applying statistics to tolerance stacks and covers precautions about when and how to use statistics in stacks. Newly acquired learning is reinforced throughout the class with stacks that allow the student to practice applying statistical methods.
2018-11-08 ...
  • November 8-9, 2018 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
Training / Education Classroom Seminars
This seminar covers the five types of FMEAs with emphasis on constructing Design and Process FMEAs. Each column of the FMEA document will be clearly explained using an actual FMEA example. The course covers various methods for identifying failure modes, effects and causes with special attention given to severity, occurrence, and detection tables and how to develop effective recommended actions strategies. Throughout the class, participants will be involved in exercises/actual projects that demonstrate and incorporate direct application of learned principles.
2018-11-07 ...
  • November 7, 2018 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
Training / Education Classroom Seminars
This seminar is suggested for product or process experts who have a need to utilize more detailed information concerning Design of Experiments analysis. It primarily addresses the subject of ANOVA, analysis of variance, which is a statistically based, objective decision-making tool. This is an advanced seminar that covers the fundamentals required to analyze orthogonal experiments, interpret, and recommend further action based on the analysis. Emphasis is placed on the analysis phase of the DOE process.
2018-11-07 ...
  • November 7, 2018 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.
2018-11-05 ...
  • November 5, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The influx of different hybrid and electric vehicle configurations has brought about unique NVH challenges from a variety of sources. NVH refinement is an important aspect of powertrain development and the vehicle integration process. While developing the NVH behavior of the vehicle is critical to satisfy customer expectations, it is also important to consider the influence of reduced exterior noise levels on pedestrian safety.
2018-10-19 ...
  • October 19, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of position are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, and sometimes a lone example of composite position is given, those discussions often overlook the variations allowed that enable more accurate control based on part function. This advanced web seminar will clarify the proper use of “double-decker” position controls in GD&T. There are two distinct types: composite position (one symbol) and two single-segment position controls (two symbols). These are commonly used to locate patterns of features (bolt circles, etc.), but they are rarely taught in any depth.
2018-10-17 ...
  • October 17, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the topic of profile is covered in a basic Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often ignore the variations allowed with these symbols that enable them to be used in complex ways. This advanced web seminar will clarify the proper use of the profile tolerances in GD&T and uncover the nuances of these two symbols. Since profile of a surface is arguably the most powerful GD&T symbol, its full potential will be explored. It can be used to control size, form, orientation, and location and its relationship to datums can be varied.
2018-10-15 ...
  • October 15, 2018 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of datums are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often overlook the variations that enable datums to be used in complex ways. This advanced course will detail the proper use of datums, showing their full potential to make your drawings as effective as possible. Most people who use GD&T are familiar with traditional datums derived from flat surfaces, and have adequate knowledge of the principle of establishing 3-2-1 contact points.
2018-10-01 ...
  • October 1-5, 2018 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Engineering Academy covers a variety of vehicle noise control engineering principles and practices. Two specialty tracks are available: Vehicle Interior Noise and Powertrain Noise. While the Powertrain Noise track focuses on NVH issues generated by powertrain noise sources and the design strategies to minimize them, the Vehicle Interior Noise track focuses on the understanding and application of acoustical materials to optimize NVH in the passenger or operator compartment of a vehicle. Considerable attention is given to current measurement and instrumentation technologies and their effective use.
2018-10-01 ...
  • October 1-5, 2018 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Engineering Academy covers a variety of vehicle noise control engineering principles and practices. Two specialty tracks are available: Vehicle Interior Noise and Powertrain Noise. While the Vehicle Interior Noise track focuses on the understanding and application of acoustical materials to optimize NVH in the passenger or operator compartment of a vehicle, the Powertrain Noise track focuses on NVH issues generated by powertrain noise sources and the design strategies to minimize them. Noise sources include engines, transmissions/transfer cases, accessories, exhaust, gears, axles, joints, and couplings.
2018-09-25 ...
  • September 25-October 4, 2018 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Continuously Variable Transmission (CVT) technology is both a theoretical and practical option that addresses a number of system level improvement opportunities within the automotive and mobility industries. Although this technology has been available for many years and is now fully matured as a production ready technology, it is often not fully understood. This web seminar presents a focused view of CVT technology in all its forms and implementations.
2018-09-24 ...
  • September 24-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
Corporations today are on-boarding new employees critical to their mission in supporting various industries. The ramp up of these individuals is necessary to quickly contribute to the core expertise of the business. The challenge to corporations is to introduce these individuals into a far more complex world, both external and internal to the enterprise. The purpose of this Academy is to quickly address the gap between knowledge learned in university engineering degree programs and knowledge/skills needed to be productive in the automotive environment including technical, organizational, and personal disciplines.
2018-09-17 ...
  • September 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The need to control emissions and maintain fuel economy is driving the use of advanced turbocharging technology in both diesel and gasoline engines. As the use of diesel engines in passenger car gasoline and diesel engines increases, a greater focus on advanced turbocharging technology is emerging in an effort to reap the benefits obtained from turbocharging and engine downsizing. This seminar covers the basic concepts of turbocharging of gasoline and diesel engines (light and heavy duty), including turbocharger matching and charge air and EGR cooling, as well as associated controls.
2018-09-11 ...
  • September 11-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 18-19, 2018 (8:30 a.m. - 4:30 p.m.) - Gothenburg, Sweden
Training / Education Classroom Seminars
Meeting the requirements of heavy-duty engine emissions regulations is a challenge for all engine manufacturers. Since the introduction of Exhaust Gas Recirculation (EGR) in medium and heavy-duty diesel engines, these systems have become more sophisticated and tightly integrated with emission control systems. This 2-day seminar will explore the advantages and disadvantages of EGR and the most effective implementation of various EGR systems. This seminar will begin by defining EGR and why it is used in diesel engines, along with an explanation of the mechanisms by which EGR is able to reduce NOx.
2018-08-22 ...
  • August 22-23, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 5-6, 2018 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
Training / Education Classroom Seminars
This seminar provides a functional understanding of the principles involved in conducting a Design for Manufacture/Design for Assembly study. DFM/DFA can support both manual and automated processes resulting in significant cost savings through simpler designs with fewer components. Related topics include workstation layouts, ergonomic considerations and errorproofing. Actual examples from the automotive industry are used to support the lecture and participants complete actual design efficiency using the DFM/DFA worksheet.
2018-08-21 ...
  • August 21-30, 2018 (4 Sessions) - Live Online
Training / Education Online Web Seminars
This four-session web seminar provides a detailed understanding of the source – path-receiver relationship for developing appropriate sound package treatments in vehicles, including automobiles, commercial vehicles, and other transportation devices. The course provides a detailed overview of absorption, attenuation (barrier), and damping materials and how to evaluate their performances on material, component, and vehicle level applications. A significant part of this course is the case studies that demonstrate how properly designed sound package materials successfully address vehicle noise issues.
2018-08-15 ...
  • August 15-17, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
Viewing 1 to 30 of 507