Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 1400
CURRENT
2017-08-28
Standard
AMS3793C
This specification and its supplementary detail specifications cover para aramid in the form of tape and webbing.
2017-08-28
WIP Standard
J400
This SAE Recommended Practice covers a laboratory procedure for testing and evaluating the resistance of surface coating to chipping by gravel impact. The test is designed to reproduce the effect of gravel or other media striking exposed paint or coated surfaces of an automobile and has been correlated with actual field results. The specific intent of the test is to evaluate organic surface coatings or systems on flat test panels; however, It may be possible to extend this type of testing to finished parts or other types of materials such as anodized aluminum or plated plastics if the results are interpreted with respect to the limitations and intent implied by the original testing procedures and rating system. This document may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use.
CURRENT
2017-08-17
Standard
AMS3793/3C
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights.
CURRENT
2017-06-07
Standard
J948_201706
These methods of test are applicable for determining the resistance to snagging and abrasion of automotive bodycloth, vinyl, and leather.
CURRENT
2017-05-08
Standard
AS5385D
This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
CURRENT
2017-02-13
Standard
J1530_201702
This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.
CURRENT
2016-12-16
Standard
AMS3844C
This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, hot-melt, addition-type, polyimide resin system, furnished in continuous rolls of full width material.
CURRENT
2016-12-15
Standard
AMS3831B
This specification covers a glass cloth impregnated with a heat-curable epoxy resin system, the resin being processed to a “B” stage condition, and furnished in the form of continuous rolls.
CURRENT
2016-12-15
Standard
AMS3847D
This specification covers one type of quartz cloth impregnated with a heat-reactive, thermosetting, polyimide resin system, the resin being processed to a "B" stage condition, and furnished in continuous rolls of full width material.
CURRENT
2016-12-15
Standard
AMS3837E
This specification covers "S" glass in one style of woven fabric with an HTS-904 finish.
CURRENT
2016-12-15
Standard
AMS3845C
This specification cover glass cloth impregnated with a heat-reactive, thermosetting, addition-cure polyimide resin system, the resin to be supplied in a "B" stage condition.
CURRENT
2016-12-15
Standard
AMS3849C
This specification covers one type of quartz cloth impregnated with a heat-reactive, thermosetting, hot-melt, addition-type, polyimide resin system, furnished in continuous rolls of full width material.
CURRENT
2016-12-13
Standard
AMS3801D
This specification covers a low modulus meta-aramid in the form of cloth.
CURRENT
2016-11-11
Standard
AMS3903/4B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-11
Standard
AMS3903/5B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-11
Standard
AMS3903/7B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-11
Standard
AMS3903/6B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-11
Standard
AMS3903/8B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-10
Standard
AMS3826C
This specification covers two styles of glass cloth impregnated with a polyester resin system, the resin being processed to a “B” stage condition. Either style of glass may be used.
CURRENT
2016-11-10
Standard
AMS3903/3B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-10
Standard
AMS3903/2B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-10-13
Standard
AMS3906C
This specification and its supplementary detail specification cover various types of non-woven glass cloth in the form of tape and flat sheet impregnated with epoxy resin, the resin to be supplied in a “B” staged condition.
CURRENT
2016-10-11
Standard
AMS3801/2C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/3C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/4C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/5C
This specification covers one weight and one weave of low-modulus resin treated meta-aramid cloth.
CURRENT
2016-07-12
Standard
AMS3779/2B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
CURRENT
2016-07-12
Standard
AMS3779/1B
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
CURRENT
2016-06-30
Standard
AMS3787/8C
This specification covers one weight and strength of para-aramid thread.
CURRENT
2016-06-24
Standard
AMS3856B
This specification and its supplementary detail specifications cover flame resistant cloth woven from various fibers.
Viewing 1 to 30 of 1400

Filter

  • Standard
    1400