Criteria

Text:
Display:

Results

Viewing 1 to 12 of 12
2016-05-23 ...
  • May 23-24, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Signal processing has become a critical tool in optimizing vehicle noise. This seminar will help you to understand the foundation common to all NVH data acquisition equipment including digitizing, windows, aliasing, averaging techniques, and common analysis functions such as the power spectrum, transfer function and coherence. Fundamental concepts such as filtering, modulation, convolution, and correlation, as well as specialized techniques used in rotating machinery such as adaptive re-sampling and order tracking, will be covered.
2016-04-04 ...
  • April 4, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This course provides an introduction to basic tire mechanics, including materials, sidewall stampings, pressure, tread patterns, tire inspection and basic tire failure identification of passenger and light truck tires. Practical in nature and supplemented with samples and hands-on activities, the course will provide you with information that you can use immediately on-the-job and apply to your own vehicle. It serves as a good primer for the in-depth SAE Tire Forensic Analysis course. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 7 Continuing Education Units (CEUs).
2015-12-07 ...
  • December 7-8, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • March 14-15, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • June 13-14, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • October 24-25, 2016 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
The task of certifying an aircraft or part can be overwhelming given the lengthy process and the many steps that are required. Understanding the process can greatly enhance the outcome and reduce unnecessary delays or frustrations. This course will provide an overview of the Federal Aviation Administration (FAA) organizational structure, its policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. It will also cover the rule-making process and rules applicable to aircraft parts and products.
2015-12-07 ...
  • December 7-8, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 14-15, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 3-4, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2015-09-28 ...
  • September 28-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 9-11, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 19-21, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This interactive seminar will take you beyond the basics of passenger car and light truck vehicle dynamics by applying advanced theory, physical tests and CAE to the assessment of ride, braking, steering and handling performance. Governing state-space equations with transfer functions for primary ride and open loop handling will be developed & analyzed. Building on the analysis of the state space equations, common physical tests and their corresponding CAE solutions for steady state and transient vehicle events will be presented. The "state-of-the-art" of vehicle dynamics CAE will be discussed.
2015-09-24 ...
  • September 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
  • January 28-29, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • May 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. ARP4761 describes guidelines and methods for performing safety assessments.
2015-09-21 ...
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
  • January 27-28, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • July 25-26, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • December 1-2, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. The requirements for producing an FAA approved replacement part can be daunting.
2015-09-21 ...
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
  • January 25-26, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • May 9-10, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course focuses on Rockwell and Brinell hardness testing and Vickers and Knoop microhardness testing. Participants will learn about how the tests are performed, test sample requirements, test parameter selection, and testing requirements. The course can be completed in 30 minutes.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about tensile testing of metals with a focus on how the testing is performed and tensile properties are measured. It includes one module followed by a quiz.
Anytime
Training / Education On Demand Fast Track
Two of the most important and commonly used components in racing data acquisition today are engine RPM and speed analysis. These two channels of data give race teams and engineers critical information that can be used every day to help quantify changes in both the driver and the race vehicle. This 80-minute, online short course focuses on race car data acquisition, highlighting cornering speeds, engine acceleration rates, gear selection, engine RPM curves, shift times, throttle on/off, engine acceleration, wheel spin, brake lock, cornering speed, ignition cutout and much more.
Anytime
Training / Education On Demand e-Seminar
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
Viewing 1 to 12 of 12