Criteria

Text:
Display:

Results

Viewing 1 to 14 of 14
2017-09-21 ...
  • September 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2017-06-19 ...
  • June 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This interactive seminar will take you beyond the basics of passenger car and light truck vehicle dynamics by applying advanced theory, physical tests and CAE to the assessment of ride, braking, steering and handling performance. Governing state-space equations with transfer functions for primary ride and open loop handling will be developed & analyzed. Building on the analysis of the state space equations, common physical tests and their corresponding CAE solutions for steady state and transient vehicle events will be presented. The "state-of-the-art" of vehicle dynamics CAE will be discussed.
2017-06-15 ...
  • June 15-16, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • August 22-23, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • December 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
Training / Education Classroom Seminars
Individuals responsible for quality management system, implementation, and transition to the AS9100:2016 series of standards for Aviation, Space, and Defense will require an understanding of the requirements for the preparation and execution of the audit process as defined in these revised standards. Management and implementers of AS9100:2016 Rev. D within these organizations must also be aware of what these changes may mean for their company.
2017-06-13 ...
  • June 13-14, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • October 24-25, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
The task of certifying an aircraft or part can be overwhelming given the lengthy process and the many steps that are required. Understanding the process can greatly enhance the outcome and reduce unnecessary delays or frustrations. This course will provide an overview of the Federal Aviation Administration (FAA) organizational structure, its policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. It will also cover the rule-making process and rules applicable to aircraft parts and products.
2017-06-12 ...
  • June 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • July 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 4-5, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
Training / Education Classroom Seminars
The requirements for producing an FAA approved replacement part can be daunting. Understanding the steps required in the FAA Parts Manufacturer Approval (PMA) process can greatly streamline the approval life-cycle and reduce unnecessary costs and delays, thereby shortening the time and cost to market. This course is designed for those organizations and individuals interested in designing and manufacturing replacement parts for civil aviation aircraft. This two-day course covers the crucial subjects and steps of the FAA-PMA approval process.
2017-06-12 ...
  • June 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
Training / Education Classroom Seminars
The avionics hardware industry world-wide is now commonly required to follow DO-254 Design Assurance Guidance for Airborne Electronic Hardware for literally all phases of development: Safety, Requirements, Design, Logic Implementation, V&V, Quality Assurance, etc. The DO-254 standard is a companion to the software DO-178B standard; however, there are many differences between hardware and software which must be understood. This basic course introduces the intent of the DO-254 standard for commercial avionics hardware development.
2017-06-08 ...
  • June 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
Part 21 is the FAA regulation that provides the regulatory framework to conduct certification of products and parts. This includes the engineering, airworthiness, production and quality systems. The aerospace industry is hinged around compliance with Part 21; however, comprehension of Part 21 and its role in civil certification is challenging. This course is designed to provide participants with an understanding of the processes that encompass aircraft certification, including compliance with FARs, certification procedures and post certification responsibilities.
2017-05-11 ...
  • May 11-12, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • June 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • October 19-20, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
ARP4761 describes guidelines and methods for performing safety assessments. This recommended practice is associated with showing compliance with certification requirements (14CFR/CS Parts 23 and 25, section 1309) and assisting a company in meeting their own internal safety standards. The safety processes described are primarily associated with civil airborne equipment but the processes and tools may be applied to many applications.
2017-05-08 ...
  • May 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 5-6, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • June 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
  • October 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
ARP4754A substantially revises the industry guidance for the development of aircraft and aircraft systems while taking into account the overall aircraft operating environment and functions. This development process includes validation of requirements and verification of the design implementation for certification and product assurance. ARP4754A provides the practices for showing compliance with regulations and serves to assist companies in developing and meeting its own internal standards though application of the described guidelines.
Training / Education Classroom Seminars
Certifying an aircraft, part or appliance can be challenging while navigating the maze of Federal Aviation Administration (FAA) procedures, rules, policies and guidelines. This course will help you to the understand the FAA organizational structure, it’s policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals, and provide you with a competitive edge and potential reduction in time in obtaining an FAA approval.
Training / Education Classroom Seminars
This course provides an introduction to basic tire mechanics, including materials, sidewall stampings, pressure, tread patterns, tire inspection and basic tire failure identification of passenger and light truck tires. Practical in nature and supplemented with samples and hands-on activities, the course will provide you with information that you can use immediately on-the-job and apply to your own vehicle. It serves as a good primer for the in-depth SAE Tire Forensic Analysis course. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 7 Continuing Education Units (CEUs).
Anytime
Training / Education On Demand Metallurgy Online Course
This online course focuses on Rockwell and Brinell hardness testing and Vickers and Knoop microhardness testing. Participants will learn about how the tests are performed, test sample requirements, test parameter selection, and testing requirements. The course can be completed in 30 minutes.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about tensile testing of metals with a focus on how the testing is performed and tensile properties are measured. It includes one module followed by a quiz.
Anytime
Training / Education On Demand e-Seminar
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
Viewing 1 to 14 of 14