Criteria

Text:
Content:
Display:

Results

Viewing 7291 to 7320 of 7326
HISTORICAL
1947-08-01
Standard
AS392
This specification covers two (2) basic types of instruments as follows: Type I - Range 35,000 feet. Barometric Pressure. Scale range at least 28.1 - 30.99 inches of mercury (946-1049 millibars). May include markers working in conjunction with the Barometric Pressure Scale to indicate pressure altitude. Type II - Range 50,000 feet. Barometric Pressure. Scale range at least 28.1 - 30.99 inches of mercury (946-1049 millibars). May include markers working in conjunction with the Barometric Pressure Scale to indicate pressure altitude.
HISTORICAL
1947-08-01
Standard
AS399
This specification covers minimum requirements for gyroscopically stabilized (or integrated) magnetic direction indicators for use in aircraft.
HISTORICAL
1947-08-01
Standard
AS396
This specification covers two basic types as follows:
HISTORICAL
1947-08-01
Standard
AS394
This specification covers three types as follows:
HISTORICAL
1947-07-01
Standard
AS391
This Aeronautical Standard covers five basic types o fairspeed instruments as follows: Type I - 1 revolution Type II - 1 revolution (unequal scale) Type III - 1 1/2 to 1 3/4 revolutions Type IV - 7 revolutions Type V - 1 3/4 to 2 revolutions
CURRENT
1947-07-01
Standard
AS395
This specification covers three basic types of instruments as follows:
HISTORICAL
1947-07-01
Standard
AS398
This specification covers two basic types as follows: Type I - Direct Reading Type II - Remote Indicating
HISTORICAL
1947-02-01
Standard
AS397
This specification covers two basic types as follows:
HISTORICAL
1946-11-01
Standard
AMS3626
This specification covers one type of methyl methacrylate in the form of extrusions, compression moldings, and injection moldings. These products have been used typically for parts requiring good dimensional stability, a high degree of optical clarity, and good resistance to outdoor weathering, but usage is not limited to such applications.
HISTORICAL
1946-04-01
Standard
AMS2640B
This specification has been declared 'CANCELLED' by the Aerospace Materials Division SAE, as of April 1996. and has been superseded ASTM E 1444.
HISTORICAL
1945-10-01
Standard
AMS6372
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing. This tubing has been used typically for parts, 0.75 inch (19 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
HISTORICAL
1944-11-01
Standard
AMS2601B
This specification provides requirements and procedures for gas-pressure leak testing of parts.
HISTORICAL
1944-11-01
Standard
AMS2602A
This specification provides requirements and procedures for air-pressure leak testing of parts.
HISTORICAL
1944-11-01
Standard
AMS2605A
This specification provides requirements and procedures for air-pressure leak testing of parts.
HISTORICAL
1944-11-01
Standard
AMS2607A
This specification provides requirements and procedures for air-pressure leak testing of parts.
HISTORICAL
1944-11-01
Standard
AMS2606B
This specification provides requirements and procedures for air-pressure leak testing of parts.
HISTORICAL
1944-08-01
Standard
AMS2640A
This specification has been declared 'CANCELLED' by the Aerospace Materials Division SAE, as of April 1996. and has been superseded ASTM E 1444.
HISTORICAL
1944-05-01
Standard
AS84A
This SAE Aerospace Standard (AS) defines an involute with a 30? pressure angle and a full radius at the roots thus reducing the stress concentration in the area of the root.
HISTORICAL
1943-11-01
Standard
ARP159
HISTORICAL
1943-11-01
Standard
ARP85A
This specification is written to cover heating and ventilating equipment under four main classifications, namely; A. HEATING AND VENTILATING EQUIPMENT - GENERAL - Dealing with features applicable to all makes and uses. B. HEATING AND VENTILATING EQUIPMENT - MILITARY - Dealing with features applicable only to military aircraft. C. HEATING AND VENTILATING EQUIPMENT - COMMERCIAL - Dealing with features applicable only to commercial aircraft. D. DESIRABLE DESIGN FEATURES - General information for use of those concerned in meeting requirements contained herein.
HISTORICAL
1943-10-01
Standard
AMS5032
This specification covers a low-carbon steel in the form of wire supplied as coils of wire or, when specified, as straight lengths.
HISTORICAL
1943-03-01
Standard
AS130
HISTORICAL
1943-01-01
Standard
ARP85
HISTORICAL
1942-12-01
Standard
AMS6352A
This specification covers an aircraft quality, low alloy steel in the form of sheet, strip, and plate. These products have been used typically for heat treated parts and structures that may require welding during fabrication, but usage is not limited to such applications. It may be through-hardened to a minimum tensile strength of 180 ksi (1241 MPa) in sections 0.125 inch (3.18 mm) and under in nominal thickness and proportionately lower strength in heavier section thicknesses.
HISTORICAL
1942-06-01
Standard
AMS6362
This specification covers an aircraft-quality, low-alloy steel in the form of round, seamless tubing having a wall thickness not greater than 0.188 inch (4.78 mm). This tubing has been used typically for general use where a minimum tensile strength of 150 ksi (1034 MPa) is required, but usage is not limited to such applications.
HISTORICAL
1942-03-01
Standard
AS84
This SAE Aerospace Standard (AS) defines an involute with a 30? pressure angle and a full radius at the roots thus reducing the stress concentration in the area of the root.
HISTORICAL
1942-01-01
Standard
AMS2601A
This specification provides requirements and procedures for gas-pressure leak testing of parts.
HISTORICAL
1942-01-01
Standard
AMS2602
This specification provides requirements and procedures for air-pressure leak testing of parts.
HISTORICAL
1942-01-01
Standard
AMS2605
This specification provides requirements and procedures for air-pressure leak testing of parts.
Viewing 7291 to 7320 of 7326