Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 303
2017-08-24
Magazine
On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.
2017-07-27
Magazine
The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2014-05-08
Magazine
Executive Viewpoints Off-highway industry executives write about some of the challenges and trends facing the industry over the next 20 years, and the innovation that will be required to stay competitive and sustainable. Annual product guide A product roundup showcasing the newest and most innovative supplier technologies in a variety of areas such as Powertrain & Energy, Electronics, Hydraulics, Materials, Testing & Simulation, Body and Chassis, and Interiors.
2014-02-01
Magazine
Evaluation of heavy-vehicle aerodynamic drag In an attempt to achieve a balance between Reynolds number, model scale, and tunnel blockage issues, a 1:3 scale heavy-vehicle testing program has been initiated at the Monash University 1.4-MW wind tunnel. Validating performance suspension parts advances A forum at the 2013 SEMA Show discussed three approaches to ensure performance parts compliance with Federal Motor Vehicle Safety Standard 126. Panelists also explained how simulation data, and kinematics and compliance measurements, can improve performance parts design. Active safety starts in the pilot's seat Dassault Aviation's next-generation integrated digital avionics systems contribute to enhanced air safety in civil applications. Chevrolet ups the performance ante with MY2015 Corvette Z06 Stiffer-bodied sports car gains wind-aided performance with supercharging and downforce for faster lap times.
2013-03-07
Magazine
Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.
2012-01-12
Magazine
Cummins digs in with high-speed diesel Cummins started with a clean sheet, and some legacy technology, for what it describes at the most powerful highspeed diesel ever built.
2011-09-22
Magazine
Materials' effect on aftertreatment Researchers from Tenneco discuss DPF acoustic performance through an evaluation of various materials and conditions.
Viewing 1 to 30 of 303

Filter

  • Magazine
    303