Criteria

Text:
Content:
Display:

Results

Viewing 31 to 60 of 485
2016-10-27
Article
With its newest work space designated a center of excellence for cameras, ZF TRW underscores the critical role 'seeing' technology plays in automated driving.
2016-10-20
Article
The fusing of emerging technologies from the aerospace materials sector and biological sciences are now, for the first time, heading toward the prospect of growing parts, systems, and, ultimately, perhaps whole aircraft.
2016-10-10
Article
The new Endevco model 7264H from Meggitt Sensing Systems is an optimally gas-damped accelerometer for automotive safety testing with target applications that include pedestrian safety, military vehicle and sled testing.
2016-09-22
Article
The automotive cyber wars are just getting started. Regardless of what side of the battle you’re on, there are valuable insights into the other guy’s strategies and tactics in an excellent new book, The Car Hacker's Handbook .
2016-09-20
Article
While OEMs wait for NHTSA's V2X mandate they are discussing whether broad usage can be achieved without regulations.
2016-09-14
Article
A high-fidelity test bed is used to conduct cyber assurance testing for commercial vehicles including long-haul trucks.
2016-09-14
Article
Exa and Navistar researchers examine CFD simulations and wind-tunnel test results to increase the understanding of simulation methods used to reveal aerodynamic losses in the real-world environment.
2016-09-10
Article
The connected car’s emergence is as disruptive for insurance companies as it is for automakers. Usage based insurance (UBI) holds a major role in future plans, prompting insurers to partner with OEMs and create apps that provide services that make UBI more attractive to customers.
2016-08-26
Article
CNH Industrial and AVL researchers used simulation, test bench, and road testing of a demonstrator vehicle with a WHR system to show significantly reduced fuel consumption.
2016-07-15
Article
Validation testing of the new 2-step VCR by several OEMs has been successful to date and is expanding, as the industry examines more sophisticated solutions to meet CO2 regulations.
2016-07-15
Article
Mississippi State University's Car of the Future, a hybridized Subaru BRZ with advanced software and 3D-priinted innovations, gets an estimated triple-digit mpg while improving acceleration.
2016-04-27
Article
Take-it-to-the-limit testing is typically reserved for vehicle development teams, but Jaguar's route and the sensational topography clearly gave Automotive Engineering good insight into F-Pace's dynamic capabilities and its four-year development.
2016-04-24
Article
Consortium of OEMs and suppliers worked on all fronts, while the SAE Interior Climate Control Committee reopened a suite of draft standards to prepare for possible importation of cars with R-744: CO2 as a refrigerant.
2016-04-20
Article
Experts say Phase Change Material (PCM) formulated for high latent heat capacity can provide cabin warmth for a typical U.S. daily commute, with residual capacity insulated for an EV parked during an eight-hour workday.
2016-04-14
Article
Manufacturing and service teams are discovering ways to use AR technology to handle complex systems like wire harnesses.
2016-04-11
Article
Automakers are increasingly employing digital crash test dummies made of zeroes and ones to take the big hits in virtual vehicles.
2016-03-27
Article
Self-driving car project CEO John Krafcik discussed Google's work underway toward fully autonomous vehicles, at a recent NY forum. First likely market: the elderly and impaired.
2016-03-24
Article
In this Q&A, Toyota Technical Center President Seiya Nakao discusses future mobility development, technical innovation, Toyota's recent reorganization, and the ever-changing automotive engineering profession.
2016-02-29
Article
Three SAE standards are to be incorporated in EPA regulations, including refrigerant identification, built-in or via USB on hand-held units, incorporated in requirements for recovery/recycle/recharge equipment. There's also a standard for testing internal heat exchangers in development.
2016-02-03
Article
Britain has established a real-world test highway for connected and autonomous vehicle technologies. JLR is one of the companies investing in the 66-km-long R&D route.
2016-01-29
Article
Electric propulsion is on the verge of causing the biggest changes in aviation since the advent of the jet engine.
2016-01-27
Article
A new Michelin tire is an all-season street grabber with technical attributes derived from endurance racing.
2016-01-20
Article
System offers fast response and eliminates piston drag, but hydraulic output to front wheels is still needed for larger cars.
2016-01-07
Article
Ford has begun evaluating a new, smaller-size, lower cost LiDAR that will help enable vehicle autonomy at SAE Levels 4 and 5.
2016-01-03
Article
Purdue University has developed a new system that allows a 3D printer to produce functioning products with enclosed electronic and motorized components and customized devices such as a computer mouse molded to a user's hand.
2015-11-25
Article
Claimed to be more package-efficient than conventional portable emissions measurement systems, the Firefly will hit the market as early as mid-2016.
2015-11-24
Article
DTS offers the ARS PRO high-performance angular rate sensor, which is designed for a range of applications including vehicle handling, crash, biomechanics, and even high-rate ballistics testing.
2015-11-19
Article
GM recently announced that its fuel-cell engineering team is working with the U.S. Army TARDEC to develop a prototype pickup truck with a commercial hydrogen fuel-cell powertrain that is capable of meeting U.S. military duty cycles. The vehicle will be put into daily use and driven by soldiers for 12 months.
2015-11-19
Article
It is possible to look at Audi’s new-generation aluminum/carbon fiber-constructed V10 R8 supercar in two ways: its entire technology comprises 50% of the latest R8 LMS (Le Mans Series) GT3 racecar; alternatively, the racecar comprises 50% of the road car. Oliver Jarvis, Audi’s motorsport team driver, provides insights to both cars.
2015-11-09
Article
Design and build time of the UAV is said to be reduced 50%, and its is use of lightweight materials the enabler to reaching speeds over 150 mph.
Viewing 31 to 60 of 485

Filter

  • Article
    485