Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 112
2017-09-30
WIP Standard
AS9104B
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier's activities. It shall be applied to the supplier's complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards.
2017-09-22
WIP Standard
AS6171/23
The intent of this test method is to describe high level processes to detect suspect/counterfeit (SC) Electrical, Electronic, and Electromechanical (EEE) Assemblies, covering both custom and military/commercial off-the-shelf (COTS) assemblies. This standard includes requirements for accreditation and certification of Laboratory and Laboratory personnel, and also, data collection, interpretation, and reporting as applicable to this test method. This standard covers EEE assemblies and includes electronic circuit card assemblies as defined under the definition for EEE Assembly and Electronic Circuit Card Assembly.
2017-09-11
WIP Standard
AS6171/6A
Through the use of ultra-high frequency ultrasound, typically above 10 MHz, Acoustic Microscopy (AM) non-destructively finds and characterizes physical features and latent defects (visualization of interior features in a layer by layer process) - such as material continuity and discontinuities, sub-surface flaws, cracks, voids, delaminations and porosity. AM observed features and defects can be indicators that the components were improperly handled, stored, altered or previously used. If AS6171/6 is invoked in the contract, the base document, AS6171 General Requirements shall also apply.
CURRENT
2017-09-05
Standard
AS13001A
This standard establishes the common requirements for training of DPRV personnel for use at all levels of the aerospace engine supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to its suppliers (reference 9100 and 9110 standards) and to perform product acceptance on its behalf. It is intended that organizations specify their DPRV requirements through the application of AS9117. While the delegating organization will use the AS13001 standard as the baseline for establishing DPRV process and product training, it may include additional contractual training requirements to meet its specific needs. The DPRV training material was primarily developed for aerospace engine supply chain requirements however this standard may also be used in other aerospace industry sectors where a DPRV process requiring specific training can be of benefit.
CURRENT
2017-08-24
Standard
TS202AR-13
No Scope available.
CURRENT
2017-08-24
Standard
TS201-6
No Scope available.
CURRENT
2017-08-24
Standard
TS202-13
No Scope available.
CURRENT
2017-08-24
Standard
TS201AR-6
No Scope available.
2017-08-17
WIP Standard
AS6810
The criteria defined in the standard shall be utilized by an Accreditation Body (AB) to establish compliance to AS6171 Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts, and associated AS6171 Test Methods.
CURRENT
2017-07-12
Standard
AIR5451A
The landing gear system is a major and safety critical airframe system that needs to be integrated efficiently to meet the overall aircraft program goals of minimizing the penalties of weight, cost, dispatch reliability and maintenance. As the landing gear system business develops and large-scale teaming arrangements and acquisitions become increasingly common, it may be desirable in some instances to procure an Integrated Landing Gear System. This document provides guidelines and useful references for developing an integrated landing gear system for an aircraft. The document structure is divided into four sections: • Landing Gear System Configuration Requirements (Section 3) • Landing Gear System Functional Requirements (Section 4) • Landing Gear System Integrity Requirements (Section 5) • Landing Gear System Program Requirements (Section 6) The landing gear system encompasses all landing gear structural and subsystem elements.
CURRENT
2017-06-21
Standard
ARP9009A
This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.
CURRENT
2017-06-19
Standard
AS7201A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-19
Standard
AS7202A
This document has been declared "CANCELLED" as of June 2017 and has been superseded by PRI AC7202. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7202. Cancelled specifications are available from SAE.
CURRENT
2017-06-19
Standard
AS7200/1B
This document has been declared "CANCELLED" as of June 2017 and has been superseded by PRI AC7200/1. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7200/1. Cancelled specifications are available from SAE.
2017-06-13
WIP Standard
AS6171/22
To define capabilities and limitations of SEM-EDS as it pertains to counterfeit detection of EEE parts and suggest possible applications to these ends. Additionally, this document outlines requirements associated with the application of SEM-EDS including: Operator training; Sample preparation; Data interpretation; Equipment maintenance; and Reporting of data. If SAE AS6171/22 is invoked in the contract, the base document, AS6171 General Requirements shall also apply.
CURRENT
2017-06-12
Standard
AS7001A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7002A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7106/1A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7106/3A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7106/5A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7106A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
CURRENT
2017-06-12
Standard
AS7107A
This document has been declared "CANCELLED" as of June 2017. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index. Cancelled specifications are available from SAE.
2017-06-12
WIP Standard
AS6171A

This SAE Aerospace Standard (AS) standardizes inspection and test procedures, workmanship criteria, and minimum training and certification requirements to detect Suspect/Counterfeit (SC) Electrical, Electronic, and Electromechanical (EEE) parts. The requirements of this document apply once a decision is made to use parts with unknown chain of custody that do not have pedigree back to the original component manufacturer, or have been acquired from a broker or independent distributor, or when there are other known risk elements that result in the User/Requester to have concerns about potential SC EEE parts. The tests specified by this standard may also detect occurrences of malicious tampering, although the current version of this standard is not designed specifically for this purpose.

CURRENT
2017-06-08
Standard
AS7109/7B
This document has been declared "CANCELLED" as of June 2017 and has been superseded by PRI AC7109/7. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7109/7. Cancelled specifications are available from SAE.
CURRENT
2017-05-11
Standard
AS6171/2A
This document describes the requirements of the following test methods for counterfeit detection of electronic components: Method A: General EVI, Sample Selection, and Handling Method B: Detailed EVI, including Part Weight measurement Method C: Testing for Remarking Method D: Testing for Resurfacing Method E: Part Dimensions measurement Method F: Surface Texture Analysis using SEM The scope of this document is focused on leaded electronic components, microcircuits, multi-chip modules (MCMs), and hybrids. Other EEE components may require evaluations not specified in this procedure. Where applicable this document can be used as a guide. Additional inspections or criteria would need to be developed and documented to thoroughly evaluate these additional part types. If SAE AS6171/2 is invoked in the contract, the base document, AS6171 General Requirements shall also apply. SAE Counterfeit Defect Coverage Tool
2017-05-09
WIP Standard
AS6174/3
This document standardizes requirements for bearings: (a) supply chain management, procurement, inspection, parts management, and test/evaluation to assure the authenticity of bearings being acquired/used, and (b) response strategies when suspect or confirmed counterfeit bearings are discovered. Though developed primarily for critical application bearings, the document also may be applicable, at the discretion of the user, to other bearings with similar characteristics and applications. The bearings slash sheet is not intended to replace, conflict with, or duplicate requirements in quality system or AMS series material specs but rather to augment them with regards to counterfeit prevention and risk mitigation.
CURRENT
2017-05-09
Standard
EIASTD4899C
This document applies to the development of Plans for integrating and managing electronic components in equipment for the military and commercial aerospace markets; as well as other ADHP markets that wish to use this document. Examples of electronic components, as described in this document, include resistors, capacitors, diodes, integrated circuits, hybrids, application specific integrated circuits, wound components, and relays. It is critical for the Plan owner to review and understand the design, materials, configuration control, and qualification methods of all “as-received” electronic components, and their capabilities with respect to the application; identify risks, and where necessary, take additional action to mitigate the risks. The technical requirements are in Clause 3 of this standard, and the administrative requirements are in Clause 4.
2017-04-20
WIP Standard
AS9104/1A
These requirements are applicable to IAQG global sectors when utilizing Aerospace Industry Controlled Other Party (ICOP) schemes for the assessment and certidication of supplier quality systems in accordance with the requirements AS/EN/SJAC 9104.
CURRENT
2017-04-11
Standard
AS6174/1
The verification matrix (VM) in this slash sheet is intended for use to establish compliance to AS6174A. This slash sheet is applicable to AS6174A. Nothing in this slash sheet, however, supersedes applicable laws and regulations, unless a specific exemption has been obtained through judicial/legal channels.
CURRENT
2017-02-08
Standard
TS200AR-44
No Scope available.
Viewing 1 to 30 of 112

Filter

  • Standard
    112