Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 59
2017-11-02
Magazine
700 miles, hands-free! GM's Super Cruise turns Cadillac drivers into passengers in a well-engineered first step toward greater vehicle autonomy. Toyota rethinks the Flagship The 2018 Lexus LS moves to twin-turbo V6 power and piles on the takumi. Honda 2018 Accord: Antidote for crossover fever The all-new, tenth-generation Accord is Honda's best-ever-and makes the case for why crossovers shouldn't take over the planet. Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
2017-09-01
Magazine
Knowledge wins at 2017 Formula SAE Lincoln The University of Pennsylvania and Texas A&M win the Electric and Internal Combustion Classes, respectively. Flying high at SAE Aero Design New for the twin 2017 competitions in Texas and Florida was a requirement for planes registered in the Regular Class to carry "passengers." Pedal to the metal at Formula SAE Michigan More than 100 university teams compete in this premier student racecar design competition combining static and dynamic events. Removing bumps on the path to fully automated driving Inaugural workshop for new AutoDrive Challenge student competition held at SAE World Headquarters.
2017-05-04
Magazine
Innovations for lightweighting Tough fuel-economy bogies for 2021 and beyond are driving new approaches to materials use, as seen in these case studies. Axellent progress AAM's new Quantum drive-axle technology is a leap forward in lightweight, efficient driveline systems aimed at 2020 and beyond. Low-temperature combustion ready for prime time? At SAE's High-Efficiency IC Engines Symposium, Delphi said its new, third-generation GDCI is promising, but even LTC proponents admit that challenges remain. More automation for ECU testing The latest fault-insertion tests enable engineers to run more test cases in less time.
2017-03-02
Magazine
Thought leadership at WCX17 Lucid Motors’ David Moseley: EV or ICE, “It is all physics” New eye on the road One of the industry’s hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye’s co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France’s MCE-5.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2016-12-01
Magazine
Editorial: What's old (and revered) is new again Toyota sticking with measured, 'Teammate' approach to autonomous development Straight-sixes are back (with electrification) at Mercedes-Benz McLaren faces the electrified and autonomous future Can low-volume supercars survive amid stringent CO2 regs and robot cars? McLaren is betting £1 billion on a speedy, powerful-and independent-sports-car future. New Peugeot SUVs jump to modular platform, increase composites use Mercedes EQ concept previews 2019 electric SUV 2017 Nissan Rogue adds hybrid system with EV-only mode Renault's kids' racer
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-04-07
Magazine
Defying the disruptors and driving innovation Four top engineering executives discuss how their "traditional" companies are finding new technology opportunities and business growth amid the start-ups-and are even doing some disrupting themselves. Preparing for a 48-volt revival The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Additive manufacturing enhances GTDI pistons Selective Laser Melting may help manufacture future gasoline-engine pistons with enhanced heat-transfer properties and reduced weight.
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2016-02-16
Magazine
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
2016-02-03
Magazine
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive new gasoline and light-duty diesel ICEs. Citizen of the world Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about auto-mobility and aero-mobility 2050. CES rollouts extend connectivity, app integration Ford looks to spread Corning's new lightweight Gorilla Glass beyond the 2017 GT New 40%-scale wind tunnel increases GM's aero-development capacity Surface Generation speeds composites throughput with one-shot stamp-forming process 2017 Cadillac XT5 debuts GM's new lightweight crossover architecture Porsche and Bentley plan electric future
2015-11-27
Magazine
Electronics arms race hots up The automotive supply chain landscape is undergoing huge transformation. Dr. Elmar Dagenhart, chairman of the executive board, Continental AG, explains how his company plans to be right at the forefront Sizing up the down-sizing challenge With the impact of VW's 'Dieselgate' still being felt widely, the Aachen automobile and engine technology Colloquium was particularly pertinent this year. Ian Adcock reports on the most significant technologies and presentations. Double coupe coup! Automotive Design'sIan Adcock reflects on some of the concept cars from 2015 that caught his eye Fuelling a sustainable future What is the best route for the UK to achieve its targeted 80% reduction in greenhouse gas emissions?
2015-02-06
Magazine
Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.
2013-12-12
Magazine
Achieving efficiency via virtual validation Model-based design and V-Cycle-based development processes address the need for managing complexity, and to some extent, efficiency in product development.
2009-08-01
Magazine
Toyota punches innovations pedal From hybrids to robots, Toyota promises new ways of thinking to produce new and better products. Hyundai dreams As part of an internal competition, Hyundai designers let their minds wander through time, space, and perhaps some new dimension to conjure concepts that seem outlandish today. Maza fired up about internal combustion There is room in the market for hybrids and all-electric vehicles, but Mazda believes that internal-combustion engine offers the biggest bang for the buck. Helping hands Engineering consulting service providers expect to help OEMs meet greater fuel efficiency and tighter emissions standards. The upside ofdownsizing Hybrid powertrains are undergoing huge changes as successive generations emerge, increasing efficiency and offering better performance, with component sizes shrinking as engineers make changes that address cost.
2008-08-01
Magazine
Back to the high-power future Executive Vice President Masatami Takimoto and other officials are re-engineering Toyota, borrowing elements of the past to tackle 21st-century environmental changes. Racing to green mobility The President of Honda R&D, Masaaki Kato, hopes to harness the company's "racing spirit" to research and develop innovative methods to reduce the CO2 emissions of its products. Charging ahead Nissan's Senior Vice President, Minoru Shinohara, explains the battery technology that will allow feasible electric cars, while not forgetting to mention the GT-R supercar. Market Genesis Hyundai-Kia R&D Center Chief Hyun-Soon Lee has added the top market-research job at the company as it tries to quickly add more value to its products with new technologies and features. China goes shiftless Suppliers hope to capitalize on the future gold mine for automatic transmissions by working with OEMs on high-tech but low-cost solutions.
2008-03-01
Magazine
Internal combustion: the next generation Homogenous combustion promises to many diesel efficiency and torque with the refinement and emissions benefits of gasoline power--but challenges remain. Testing for the future Providers beef up facilities to provide clients with additional capacity and invest in new tools for greater performance. Assembly required OEMs and suppliers are struggling to build new strategies and strengthen existing systems for improved global supply-chain management in an effort to reduce costs. Change is in the air (and on the ground) Chrysler, undergoing a transformation of its own, helps shed light on issues facing the evolving automotive industry at the SAE 2008 World Congress.
2007-02-01
Magazine
Plugging into Detroit Efficient, eco-friendly hybrid concepts, in "conventional" and plug-in forms, headlined January's North American International Auto Show, but a majority of the debuting concept vehicles boasted large-capacity V8, V10, or V12 engines aimed at ultimate performance. Creating the Bin-5 Diesel Progress made in lean-NOx trap technologies helps make engines a viable option for U.S. light-duty diesel market in 2008. Putting the pieces together Product lifecycle management tools and processes help speed automotive product development. Today's challenges, tomorrow's opportunities Engineers' productivity becomes paramount as companies change and evolve their business strategies. Promoting from within After serving a three-year term as Vice President-Automotive, Rich Schaum, Chrysler's former product development chief, becomes the new face of SAE International.
2004-05-01
Magazine
Technical highlights from Geneva The high-profile event combined new technology, fresh design, debuts of major production models, and styling concepts in a compact venue. North American technology trends Every year in the May issue, Automotive Engineering International explores the major technology trends defining the auotmotive industry in North America. In June, it will do the same Europe, and in August Asia. Internal-combustion engineering Despite a century of refinement, the gasoline engine still has untapped potential, say industry executives. Body building The quest for light, quieter, and safer cars and light trucks influences the design and engineering of most vehicle areas--body not excluded. Chassis integration keeps the rubber on the road U.S. OEMs and Tier 1 suppliers are collaborating to deliver the latest technology for performance and safety, but integration stays in-house.
2002-01-01
Magazine
Spark-ignition engine trends In the face of growing competition from diesels and alternative power sources, some of the latest prototype and production gasoline-fueled engines show how continued engineering development is meeting demands for more power, reduced fuel consumption and emissions, and more efficient packaging. Expanding supplier capabilities through consolidation The pace of consolidation in the automotive industry has slowed somewhat, but its importance has not diminished. Raymond A. Morris named SAE Executive Vice President THe 27-year SAE veteran promises to focus on the needs of the customer and to become better acquainted with the Detroit automotive industry.
2000-10-01
Magazine
Speed is king Motorsports offers automakers a fast way to develop new technologies and quick-thinking engineers. This article explores how DaimlerChrysler, Ford, and General Motors approach motorsports as an engineering tool. Electronics: changing the shape of the automobile The decisions made by the automotive industry the next few years will forever change the shape of the automobile. The electronic technologies to improve fuel economy, increase passenger safety, lower emissions, and improve reliability are evolving quickly, but because of their cost the exact timeframe for their implementation is undecided. Chevrolet Corvette The Z06 is the big news for 2001, the new model having a high-output 5.7-L LS6 V8 developed by GM Powertrain. Innovation meets the mid-size segment The 2001 Chrysler Sebring and Dodge Stratus offer more power, enhanced NVH characteristics, and improved safety. Third-generation M3 The all-new high-performance M3 coupe debuts in North America.
2000-03-01
Magazine
Introducing Dr. Rodica A. Baranescu, SAE President for the year 2000 Rodica Baranescu, SAE President for the year 2000, talks about the challenges she faced and the successes she enjoyed on her odyssey to the pinnacle of the automotive engineering community. NAIAS highlights AEI editors present the technical highlights of concepts and production vehicles from the 2000 North American International Auto Show in January. Best Engineered Cars of each decade of the 20th Century Readers of Automotive Engineering International voted on the best engineered cars of each decade of the 20th Century. An overall winner was chosen from among the entries. Philippine Automotive Technology Conference/Workshop The Philippine Automotive Technology Conference/Workshop will take place Monday-Friday, April 10-14, at the Dusit Hotel Nikko in Makati City, Manile, Philippines.
2000-01-01
Magazine
Car of 2100 A.D. AEI gave readers a chance to speak out on what they thought people in 2100 would be driving. We have chosen the best submissions. Also, the AEI editors have included their best guess as to what cars will be in 2100. We realize that this is a guess but the real answer will not be known for 100 years. V8 power for BMW's M5 The new 294-kW (400-hp) S62 engine developed by BMW's M GmbH features Double VANOS variable intake and exhaust valve timing, electronic drive-by-wire, and oil circulation boosted as a function of lateral cornering force. Northstar revised for 2000 Improvements to the powerplant include a roller-follower valvetrain, improved combustion chamber, center-feed intake manifold, coil-on-plug cassette ignition system, and a Siemens powertrain controller. Aston Martin's first V12 Available in both the DB7 Vantage Coupe and Volante, the flexible all-alloy engine delivers 85% of its peak torque at just 1500 rpm.
Viewing 1 to 30 of 59

Filter

  • Magazine
    59