Criteria

Text:
Topic:
Sector:
Display:

Results

Viewing 1 to 10 of 10
2015-12-09 ...
  • December 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
The certification of transport category cabin interiors requires a thorough understanding of Part 25 Transport Category aircraft cabin interior safety and crashworthiness regulations and compliance requirements. Regardless of whether it is a simple modification, a specialized completion (VIP or VVIP) or airline passenger configuration, engineers, designers, and airworthiness personnel must understand and adhere to these requirements. This two day seminar will begin with a discussion of Commercial off the Shelf (COTS) test requirements.
2015-11-17 ...
  • November 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of aircraft accident investigation and reconstruction methodology and processes is critical to success in this supportive role. This two-day seminar will begin with the basic requirements for conducting proper accident investigations, including investigative philosophies and procedures.
2015-10-29 ...
  • October 29-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regulations, and customer expectations that may require new compliance processes. A properly run compliance program improves your product’s quality and safety, broadens your product’s market, ensures compliance with regulations and laws, and helps provide protection from future product liability issues. This two-day seminar presents a process development methodology that can be used repeatedly as new compliance requirements emerge.
2015-09-24 ...
  • September 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. ARP4761 describes guidelines and methods for performing safety assessments.
2015-09-21 ...
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. The requirements for producing an FAA approved replacement part can be daunting.
2015-08-17 ...
  • August 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns.
2015-07-20 ...
  • July 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
Training / Education Classroom Seminars
The simultaneous demands for reliability and minimum weight for aircraft and propulsion systems offer some of the most challenging technical problems that structural and safety engineers can encounter. Although much information is available on fracture mechanics and aircraft damage tolerance, this course specifically relates to damage tolerance for gas turbine engines. The need to consider damage tolerance more broadly in new engine designs has just recently been written into FAR 33.70 and new EASA guidelines.
Training / Education Classroom Seminars
Integrated Vehicle Health Management (IVHM) is an end-to-end capability that transforms system data into operational support information. This information has the ability to optimize vehicle maintenance actions, enhance vehicle safety and reliability, and extend product life. Already changing aerospace vehicle design and transforming aerospace organizations’ manufacturing and operating aircraft, IVHM continues to develop rapidly for use in ground vehicles and marine craft. In cooperation with Cranfield University, SAE International is pleased to offer this three-day seminar on IVHM.
Training / Education Classroom Seminars
This four-hour short course provides an introduction to contamination control principles in aircraft hydraulic systems. Topics covered include an introduction to the types of contamination in aircraft hydraulic systems, contaminant measurement, and reporting methods. In addition, the impact of contamination on hydraulic components is discussed in detail. Along with an introduction to filtration mechanisms, information on testing, rating, and specifying filters will be provided.
Viewing 1 to 10 of 10