Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 25 of 25
2015-12-09 ...
  • December 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
The certification of transport category cabin interiors requires a thorough understanding of Part 25 Transport Category aircraft cabin interior safety and crashworthiness regulations and compliance requirements. Regardless of whether it is a simple modification, a specialized completion (VIP or VVIP) or airline passenger configuration, engineers, designers, and airworthiness personnel must understand and adhere to these requirements. This two day seminar will begin with a discussion of Commercial off the Shelf (COTS) test requirements.
2015-11-23 ...
  • November 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Car companies and suppliers continue to develop new technologies that make vehicles safer and regulatory agencies continue to update safety regulations based on new research studies, making vehicle safety design more and more complex. This seminar covers the mechanics of frontal crashes and how vehicle structures, vehicle restraint systems, and vehicle interiors affect occupant safety. It also describes details of how CAE tools work in the simulation of frontal crashes. The goal of the course is to familiarize participants with engineering principles behind vehicle and restraint designs for occupant safety.
2015-11-17 ...
  • November 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of aircraft accident investigation and reconstruction methodology and processes is critical to success in this supportive role. This two-day seminar will begin with the basic requirements for conducting proper accident investigations, including investigative philosophies and procedures.
2015-11-06 ...
  • November 6, 2015 (8:30 a.m. - 4:30 p.m.) - Mesa, Arizona
Training / Education Classroom Seminars
The field of vehicular accident reconstruction has become increasingly specialized. For automotive engineers involved in crash reconstruction and analysis, a knowledge of basic accident reconstruction principles and techniques is essential, but often insufficient to answer the sophisticated questions posed by design engineers, regulators, and lawyers. This seminar takes participants beyond the basics of accident reconstruction to physical models and analysis techniques that are unique to the reconstruction of single-vehicle rollover crashes.
2015-11-05 ...
  • November 5, 2015 (8:00 a.m. - 5:00 p.m.) - Mesa, Arizona
Training / Education Classroom Seminars
The reconstruction and analysis of motorcycle crashes requires a specialized set of skills and knowledge beyond those required for typical four wheel vehicles. This seminar takes participants beyond the basics of crash reconstruction to physical models and analysis techniques that are unique to the reconstruction of motorcycle crashes, providing learners with a comprehensive summary of applicable reconstruction techniques.
2015-11-03 ...
  • November 3-5, 2015 (2 Sessions) - Live Online
Training / Education Online Web Seminars
Although many have an idea of what the term “driver distraction” means, there is no common definition within the research community. Additionally, there are many studies that have investigated the topic, but with varying and sometimes conflicting results. What should be made of these discrepancies? This four-hour web seminar will provide an overview of driver distraction (predominantly electronic devices): the problem; how to define it; the current state of research and how to critically evaluate that research to make informed decisions; and the effectiveness of state laws and fleet policies to reduce it.
2015-11-02 ...
  • November 2-4, 2015 (8:30 a.m. - 4:30 p.m.) - Mesa, Arizona
Training / Education Classroom Seminars
Automotive crash reconstruction is a process carried out with the specific purpose of estimating in both a qualitative and quantitative manner how a crash occurred. Reconstructions are based on data collected during the crash and physical evidence gathered during a crash investigation. To some extent, testimonial evidence is also used. Whether a crash is between two vehicles, a vehicle and pedestrian or a vehicle and a barrier, specific crash segments, classified as pre-impact, impact and post-impact motion often are reconstructed separately.
2015-10-29 ...
  • October 29-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regulations, and customer expectations that may require new compliance processes. A properly run compliance program improves your product’s quality and safety, broadens your product’s market, ensures compliance with regulations and laws, and helps provide protection from future product liability issues. This two-day seminar presents a process development methodology that can be used repeatedly as new compliance requirements emerge.
2015-10-26 ...
  • October 26-28, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Safety continues to be one of the most important factors in motor vehicle design, manufacture and marketing. This seminar provides a comprehensive overview of these critical automotive safety considerations: injury and anatomy; human tolerance and biomechanics; occupant protection; testing; and federal legislation. The knowledge shared at this seminar will enable attendees to be more aware of safety considerations and to better understand and interact with safety experts. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 18 Continuing Education Units (CEUs).
2015-10-13 ...
  • October 13-16, 2015 (8:00 a.m. - 5:30 p.m.) - Oxnard, California
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm Recent advances in commercial vehicle equipment have increased the potential for incident-related data to be recorded surrounding a collision event. What some have called a "black box" is more properly referred to as a Heavy Vehicle Event Data Recorder (HVEDR) as defined by the SAE J2728 HVEDR Recommended Practice.
2015-09-24 ...
  • September 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. ARP4761 describes guidelines and methods for performing safety assessments.
2015-09-21 ...
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate. The requirements for producing an FAA approved replacement part can be daunting.
2015-09-19 ...
  • September 19, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • October 1, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2015-09-17 ...
  • September 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
2015-09-09 ...
  • September 9-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 7-9, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
EDR’s are not new, but are becoming more prevalent in part due to a new federal regulation. 49 CFR, Part 563, which affects vehicles produced after September 30, 2012, will result in a standardized and publicly available EDR in 90% of new vehicles. Accident Reconstructionists frequently have trouble reconciling EDR data with other data sources, and improvements in ABS technology result in fewer tire marks visible at the scene of crashes to allow calculation of pre-crash speeds without an EDR.
2015-08-17 ...
  • August 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns.
2015-08-05 ...
  • August 5-7, 2015 (2 Sessions) - Live Online
  • December 2-4, 2015 (2 Sessions) - Live Online
Training / Education Online Web Seminars
ISO 26262: Road Vehicle - Functional Safety is now becoming a condition of compliance for doing business in the automotive sector. The Scope states: “ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3,500 kg…" This course provides background for reading and applying the standard and explains its scope, the major differences from the general safety standard IEC 61508, and how the scope changes with the introduction of new systems.
2015-07-30 ...
  • July 30, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
High-voltage, high-current energy storage systems and electrical circuits in many current and future alternative-propulsion powertrains present unique challenges to the automotive industry. Care must be taken to minimize risk to all who come into contact with the vehicle throughout its development and life cycle, including powertrain developers, assembly line workers, service technicians, vehicle occupants, and first responders. Significant risk to life and limb can arise from technical issues surrounding these vehicles.
2015-07-20 ...
  • July 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
Training / Education Classroom Seminars
The simultaneous demands for reliability and minimum weight for aircraft and propulsion systems offer some of the most challenging technical problems that structural and safety engineers can encounter. Although much information is available on fracture mechanics and aircraft damage tolerance, this course specifically relates to damage tolerance for gas turbine engines. The need to consider damage tolerance more broadly in new engine designs has just recently been written into FAR 33.70 and new EASA guidelines.
Training / Education Classroom Seminars
Integrated Vehicle Health Management (IVHM) is an end-to-end capability that transforms system data into operational support information. This information has the ability to optimize vehicle maintenance actions, enhance vehicle safety and reliability, and extend product life. Already changing aerospace vehicle design and transforming aerospace organizations’ manufacturing and operating aircraft, IVHM continues to develop rapidly for use in ground vehicles and marine craft. In cooperation with Cranfield University, SAE International is pleased to offer this three-day seminar on IVHM.
Anytime
Training / Education On Demand Web Seminar RePlay
Although many have an idea of what the term “driver distraction” means, there is no common definition within the research community. Additionally, there are many studies that have investigated the topic, but with varying and sometimes conflicting results. What should be made of these discrepancies? This four-hour web seminar will provide an overview of driver distraction (predominantly electronic devices): the problem; how to define it; the current state of research and how to critically evaluate that research to make informed decisions; and the effectiveness of state laws and fleet policies to reduce it.
Anytime
Training / Education On Demand Web Seminar RePlay
High-voltage, high-current energy storage systems and electrical circuits in many current and future alternative- propulsion powertrains present unique challenges to the automotive industry. Care must be taken to minimize risk to all who come into contact with the vehicle throughout its development and life cycle, including powertrain developers, assembly line workers, service technicians, vehicle occupants, and first responders. Significant risk to life and limb can arise from technical issues surrounding these vehicles.
Training / Education Classroom Seminars
This four-hour short course provides an introduction to contamination control principles in aircraft hydraulic systems. Topics covered include an introduction to the types of contamination in aircraft hydraulic systems, contaminant measurement, and reporting methods. In addition, the impact of contamination on hydraulic components is discussed in detail. Along with an introduction to filtration mechanisms, information on testing, rating, and specifying filters will be provided.
Training / Education Classroom Seminars
One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This seminar covers these facets of tire safety phenomena.
Viewing 1 to 25 of 25