Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 4891 to 4920 of 4930
HISTORICAL
1952-02-01
Standard
ARP266
This recommended practice is written to cover the installation of combustion heaters used in the following applications.
HISTORICAL
1951-08-01
Standard
AS100026
HISTORICAL
1951-03-15
Standard
AS392B
This Aeronautical Standard covers two basic types of instruments as follows:
HISTORICAL
1951-03-01
Standard
AS396A
This specification covers two basic types as follows:
HISTORICAL
1949-02-01
Standard
AS143B
These standards are written to cover internal combustion heat exchanger type heaters used in the following applications:
HISTORICAL
1949-02-01
Standard
AS391A
This specification covers six types of instruments as follows:
HISTORICAL
1949-02-01
Standard
AS392A
This Aeronautical Standard covers two basic types of instruments as follows:
HISTORICAL
1948-11-01
Standard
AS245
.This specification covers the following types and classes of extinguishers: Type I Stored pressure type, Category A - Temperature range -40 to +140, Category B - Temperature range +35 to +140. Type II Cartridge operated type, Category A - Temperature range -40 to +140, Category B - Temperature range +35 to +140. To specify minimum requirements for a water solution type hand fire extinguisher which shall be suitable for use on incipient fires which may occur in an airplane cabin interior. The type of fire for which these units are intended is one involving combustible materials such as paper, textiles and similar materials
HISTORICAL
1948-11-01
Standard
AS405
This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments, Type II - Capacitance Instruments. To specify minimum requirements for Fuel and Oil Quantity Instruments for use in aircraft, the operation of which may subject the instruments to the environmental conditions specified in Paragraph 3.3.
HISTORICAL
1948-11-01
Standard
AS412
This specification covers the basic type of instrument for detection of toxic concentrations of carbon monoxide whose operation is based on measurement of heat changes through catalytic oxidation.
HISTORICAL
1948-11-01
Standard
AS408
This Aerospace Standard establishes the essential minimum safe performance standards for fuel, oil and hydraulic pressure instruments primarily for use with reciprocating engine powered transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aerospace Standard covers two basic types of fuel, oil and hydraulic pressure instruments as follows: Type I - Direct Indicating, Type II - Remote Indicating. This Aerospace Standard does not apply to engine mounted torque meter systems.
HISTORICAL
1948-11-01
Standard
AS411
This specification covers instruments intended for use in airplanes to indicate engine manifold absolute pressure.
HISTORICAL
1948-11-01
Standard
AS413
This specification covers two types of instruments. These instruments are for the purpose of measuring temperature, such as those of oil coolant, carburetor air, free air and cylinder head.
HISTORICAL
1948-11-01
Standard
AS404
To specify minimum requirements for Electric Tachometers primarily for use in reciprocating engine powered civil transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aeronautical Standard covers magnetic drag tachometers with or without built-in synchroscopes.
HISTORICAL
1948-11-01
Standard
AS407
To specify minimum requirements for Fuel Flowmeters for use primarily in reciprocating engine powered civil transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aeronautical Standard covers two basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines as follows: TYPE I - Measure rate of flow of fuel used. TYPE II - Totalize amount of fuel consumed or remaining.
HISTORICAL
1948-08-01
Standard
ARP85B
Air Condiitioning System - General - Dealing with design features. Air Conditioning Equipment - Commercial Passenger - Delaing with features. Applicable only to commercial passenger carrying aircraft. Desirable Design Features - General information for use of those concerned in meeting requirements contained herein.
CURRENT
1948-03-01
Standard
AS236
CURRENT
1948-03-01
Standard
AS234
CURRENT
1948-03-01
Standard
AS196
HISTORICAL
1947-12-01
Standard
AS393
This specification covers the following basic types:
HISTORICAL
1947-08-01
Standard
AS354A
HISTORICAL
1947-08-01
Standard
AS351A
HISTORICAL
1947-08-01
Standard
AS352A
HISTORICAL
1947-08-01
Standard
AS402
To specify minimum requirements for Automatic Pilots primarily for use in reciprocating engine powered civil transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aeronautical Standard covers Automatic Pilots intended for use on aircraft to automatically operate the aerodynamic controls to maintain flight and/or to provide maneuvering about the three axes through servo control.
HISTORICAL
1947-08-01
Standard
AS392
This specification covers two (2) basic types of instruments as follows: Type I - Range 35,000 feet. Barometric Pressure. Scale range at least 28.1 - 30.99 inches of mercury (946-1049 millibars). May include markers working in conjunction with the Barometric Pressure Scale to indicate pressure altitude. Type II - Range 50,000 feet. Barometric Pressure. Scale range at least 28.1 - 30.99 inches of mercury (946-1049 millibars). May include markers working in conjunction with the Barometric Pressure Scale to indicate pressure altitude.
HISTORICAL
1947-08-01
Standard
AS394
This specification covers three types as follows:
HISTORICAL
1947-08-01
Standard
AS399
This specification covers minimum requirements for gyroscopically stabilized (or integrated) magnetic direction indicators for use in aircraft.
HISTORICAL
1947-08-01
Standard
AS396
This specification covers two basic types as follows:
HISTORICAL
1947-07-01
Standard
AS391
This Aeronautical Standard covers five basic types o fairspeed instruments as follows: Type I - 1 revolution Type II - 1 revolution (unequal scale) Type III - 1 1/2 to 1 3/4 revolutions Type IV - 7 revolutions Type V - 1 3/4 to 2 revolutions
CURRENT
1947-07-01
Standard
AS395
This specification covers three basic types of instruments as follows:
Viewing 4891 to 4920 of 4930