Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 54
2017-09-28
Magazine
Using Thermal Simulation to Model the Effects of Wind on the Mars Curiosity Rover Quality and Validation of Digital Designs for Aerospace and Defense Scaling LiDAR Optical Payloads from Drones to Miniature UAVs Using Sintered Fiber Metal Composites for Aircraft Acoustic Attenuation GaN Breaks Barriers RF Power Amplifiers Go Wide and High Test System Ensures Flawless Performance of Military RF Devices The Impact of Video Compression on Remote Cardiac Pulse Measurement Using Imaging Photoplethysmography Remote physiological measurement technique leverages digital cameras to recover the blood volume pulse from the human body. Sensitivity Simulation of Compressed Sensing Based Electronic Warfare Receiver Using Orthogonal Matching Pursuit Algorithm Calculate the sensitivity of a CS based EW receiver using two modulation schemes.
2017-08-24
Magazine
On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.
2017-07-27
Magazine
The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.
2017-05-25
Magazine
Small Form Factor Embedded Systems New Technologies Drive Diverse Solutions Making Laser Weapons a Reality Modelling and Simulation Tools for Systems Integration on Aircraft Rotorcraft Anti-Icing Systems Redundant Transmitting System in Aircraft (RTSA) Cassini Stays in Touch with NASA's Radio Science Subsystem Laser Integration on Silicon Photonic Circuits Through Transfer Printing New fabrication approach allows the massively parallel transfer of III-V coupons to a silicon photonic target wafer. High Energy Computed Tomographic Inspection of Munitions Inspection system provides additional level of quality assurance for R&D, reverse engineering, and malfunction investigations. Terahertz (THz) Radar: A Solution for Degraded Visibility Environments (DVE) Operating at higher frequencies than other types of radar produces tighter beams and finer resolution. Imaging Detonations of Explosives Using high-speed camera pyrometers to measure and map fireball/shock expansion velocities.
2017-03-30
Magazine
Designing Electronic Warfare to Regain Airborne Military Dominance Certifying Composite Designs for Aerospace and Defense Electric Rockets and the Future of Satellite Propulsion Flat Cable Technology for Aerospace Applications XPONENTIAL 2017 – An AUVSI Experience Pulse Analysis Techniques for Radar and Electronic Warfare Reconfigurable Radio Tracks Flights Worldwide Development of an Optically Modulated Scatterer Probe for a Near-Field Measurement System Using Dempster-Shafer Fusion for Personnel Intrusion Detection Angular Random Walk Estimation of a Time-Domain Switching Micromachined Gyroscope Using Fisher Information Criteria for Chemical Sensor Selection via Convex Optimization Methods Luminescence Materials as Nanoparticle Thermal Sensors
2016-06-01
Magazine
Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2014-10-01
Magazine
Propulsion: Energy Sources Flying on vegetation Avionics/Electronics Avionics heat up, in a good way Unmanned Vehicles Reaching the benchmark in secure unmanned vehicle software Thermal Management Submersion and directed flow cooling technology for military applications RF & Microwave Technology Airborne antenna considerations for C-Band telemetry systems Software-designed system improves wireless test speed and coverage
2014-07-09
Magazine
Simulations for safety Improved design tools let aircraft developers ensure that systems, software, and mechanical elements all work together.
2014-02-03
Magazine
Thermal simulation and testing of expanded metal foils for lightning protection With the implementation of major aircraft structures fabricated from carbon fiber reinforced plastic materials, lightning protection has become a more complicated issue for designers and engineers to solve. Electronics take charge Digital controls are handling more engine control tasks on a wider range of aircraft.
2014-01-15
Magazine
Active safety starts in the pilot's seat Dassault Aviation's next-generation integrated digital avionics systems contribute to enhanced air safety in civil applications.
2013-11-06
Magazine
Simulation supports aircraft safety From analyzing crashes to hard landings, the industry is evolving in how much it relies on CAE simulation to provide safer aircraft designs. As aircraft systems become more complex, simulation itself is evolving as well.
2013-03-06
Magazine
Big fans gear up for new battles The big difference in newer commercial airplanes comes where it can't be seen: in the structure, in new materials, in the avionics, and most importantly, in the engines. Integrated Vehicle Health Management The aims of IVHM include improved safety through the use of diagnostics and prognostics to fix faults before they are an issue, as well as improve availability of fleets through better maintenance scheduling.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2011-10-26
Magazine
An icy reception Next-generation propulsion systems for next-generation aircraft still have to address an (ice) age old problem.
2011-03-02
Magazine
Materials become design, design becoems function Once things you could hold in your hand, materials have become more design ideas than entities, and the designs themselves are transforming into operational activity. The next steps in flight A look at sero engine and assembly developments as commercial airframe and engine manufacturers begin the biggest battle of all-for next-generation short-haul jet aircraft sales. NextGen Today and tomorrow The FAA has reached a major milestone on the Next Generation Air Transportation System initiative to modernize America's National Airspace System. Stacking the material deck for the 787 Combinations such as composites and titanium being used in future aircraft programs can be very challenging when drilling holes during manufacturing and assembly operations.
2010-07-07
Magazine
NextGen soon With ADS-B operations under way in Philadelphia and Louisville, the FAA takes another major step forward to NextGen.
2010-05-12
Magazine
Safer flight on the horizon Development in avionics, communications, and air-traffic management enable more affordable and better ways to fly and navigate.
2009-02-01
Magazine
Going direct in manufacturing Prototyping transitions from one-off components to flight-ready hardware. Traveling light, traveling easy Airplane manufacturers have always tried to avoid unnecessary weight- and today's materials and design tactics combine for stronger structures with less weight. making flying safer Technology is applied to new avionics and ground-based systems to make air operations, military as well as civil, far safer than ever before. Innovative Thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.
2008-04-01
Magazine
Carbon fiber gets bigger footprint Manufacturers strive for the Holy Grail of composites manufacturing: consistency and repeatability. Safety on the floor Once add-ons that brought almost as many problems as benefits, safety techniques are now being designed into equipment before start-up. Taking measures of the machine New requirements and technologies advance the art of test and sensing. Looking, listening, recording, analyzing HUMS is established as an integral part of aviation's safety network, but more standardization is needed to broaden its effectiveness.
2007-09-01
Magazine
Sound sound-research techniques Higher bypass ratios, chevrons, shape memory alloys, and improved aerodynamics are some of the advancing technologies that will help quiet aircraft, and thus help the environment. Display technology perks up HUD, software make big strides in cockpit appearance and flight safety. Going green The global aerospace industry gears up for big changes in fuel burn, emissions, and noise.
2007-07-01
Magazine
The human factor in maintaining safety The need for safety systems and processes is crucial for every aspect of aerospace, with human experience and expertise melding with increasing computer power to pinpoint potential problems and increase efficiency. Mitsui at the cutting edge of precision machining The Japanese company is riding a wave of new-aircraft programs to grow its business at the upper and lower ends of the market.
2006-06-01
Magazine
Simulating real-time safety Aircraft manufacturers are all pushing for ways to develop software more quickly without sacrificing reliability. Next-generation launchers: Only the tried and true need apply Companies find that some elements of the recipe for success have been handed down for generations. Polar satellites tries to weather storm NPOESS satellites would allow more accurate weather predictions for both military and civilian weather services.
2005-02-01
Magazine
Flying safer Software is being designed to predict pending failures, warn pilots, and maybe even fly the plane. CMM + laser probe = complete inspection Sonaca gave up its manual inspection methods in favor of a digital approach to save time- and money. A rounded view of fibers The use of fibers for aerospace gyroscope applications- notably inertial navigation and platform stabilization- is common now, but it was not always so. Piston engine propulsion SAE 100 Future look: As the propulsion industry looks to the future, the barriers remain challenging, the drivers more critical, but the innovations more promising. What's downstream in turbine technology SAE 100 Future look: Gas turbine machines-aviations, industrial, and vehicular- are versatile and cost-effective machines used for the provision of electricity, mechanical load power, and propulsion.
2004-06-01
Magazine
Showing how it's done Engineers are using software to better manage product development data, and applying tools to a new class of problems. NASA goes deep The agency's new long-term space exploration program starts with a return to the moon and will ultimately enable future exploration of Mars and other solar system destinations. Farnborough preview In an event that happens just once every two years, bringing the multitudes together, it is important to get as much technology as possible into the open and to find solutions to hard problems. Seats under crash loading The FAA and academia have conducted aircraft seat drop tests to compare and contrast passenger crash protection. A fluid approach Aerospace engineers have started using CFD software earlier and earlier in the design process.
2004-01-01
Magazine
Toward safer skies The mechanical safety of aircraft has made great strides over the years, allowing some engineers to focus on other aspects of flight safety. CFD in space Computational fluid dynamics provided a powerful tool in protecting astronauts on the ISS from CO2. Simulating safety Bombardier Aerospace simulates airflow in nacelles to prevent engine foreign-object damage.
2003-07-01
Magazine
The growth of an industry This second of a three-part series highlighting the centennial of flight focuses on how World War I and II changed the face of aviation technology. Portable test system Boeing uses VXI via KineticSystems to achieve greater dependability, accuracy, and efficiency in its digital distortion analyzer for propulsion systems. Fire-resistant composites for engine nacelles Engineers from Boeing treated fiberglass/polyimide and graphite/polyimide laminates with various phosphorylated polymers to obtain fire-resistant resins for use in harsh environments. Accelerating the design process The use of desktop analysis software can lead to a faster and more efficient process for the design and manufacture of aerospace components, according to SolidWorks.
2003-02-01
Magazine
Explosion suppressant arresting foam Technological refinements over three decades have enabled a family of polyerethane foams to aid in the prevention of catastrophic explosions caused by electrical arching, lightning strikes, and static electrical discharge. Improving SA via HUD Engineers from Honeywell and BAE Systems address the saftety and avionics issues inherent in the anticipated increase in air traffic.
2002-12-01
Magazine
Fuel-tank inerting A series of aircraft flight and ground tests evaluated the effectiveness of ground-based inerting as a means of reducing the flammability of center wing furl tanks used in the commercial transport fleet. Making sense of quality management The International Aerospace Quality Group is a unique vehicle for communicating quality system standards and initiatives through the supply base. Top technologies for 2002 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant.
2002-07-01
Magazine
Next-generation space transportation NASA narrows its search for a successor to the Space Shuttle. Air-traffic-control modernization "Aerospace Engineering" provides an update of the latest air-traffic management activities taking place in the U.S. and China. Aircraft undercarriage concept Engineers at SUS21 Co. Inc. and the Kyoto Institute of Technology have developed an aircraft suspension system that features shock isolation to reduce abrupt deceleration and impact force on aircraft wheels. Simulating Superplastic forming BAE Systems' engineers developed modeling tools and techniques to optimize superplastic forming of titanium structures.
Viewing 1 to 30 of 54