Criteria

Text:
Content:
Display:

Results

Viewing 181 to 210 of 1062
2014-10-17
Article
WITT-Gasetechnik’s dome-loaded pressure regulator is impervious to system pressure and withdrawal fluctuations.
2014-10-13
Article
Researchers at VE Commercial Vehicles Ltd. in India employed downsizing to design a commercial vehicle exhaust system using the ANSYS CFD tool Fluent, resulting in a 14.1% reductions in both size and volume and a mass savings of 2%.
2014-10-02
Article
The U. S Department of Transportation/NHTSA Vehicle Research and Test Center has commissioned dSPACE to supply an in-lab GPS simulation system. GPS simulation is used in the development and testing of numerous intelligent driving and traffic systems, including collision avoidance, advanced driver-assistance systems, navigation, and V2X communications.
2014-09-30
Article
The Model T261 series rotary transformer coupled torque sensors from SensorData Technologies meet the demanding in-line testing requirements of small motors, pumps, compressors, turbines, fans, and other fractional horsepower rated devices.
2014-09-26
Article
The task facing calibrators is not getting any easier. “The complexity of calibration exploded exponentially when the Tier 4 emissions regulations were introduced,” explained Paolo Di Martino, Business Unit Director for Diesel Systems for IAV North America.
2014-09-24
Article
The use of quenched and tempered steels for dumper bodies reduces weight and fuel consumption while increasing payload capacity and wear life.
2014-09-22
Article
Internal combustion engines are poised for dramatic breakthroughs in improving efficiency with lower emissions, due in part to low-temperature combustion regimes. Such regimes show great efficiency and emissions potential, but they present optimization and control challenges.
2014-09-08
Article
Additional $35 million will fund the company’s unique research center an additional five years, concentrating on a ‘safe transition’ to future of automated and connected vehicle technologies.
2014-08-18
Article
Material laws and orientation information are coupled in a single finite element analysis to predict the performance of the hybrid composite beam under a dynamic three point bending load.
2014-08-18
Article
LC411-USBH low-profile compression load cells from Omega enable 1000 readings per second and feature a USB output to connect directly to a computer.
2014-08-13
Article
Model 3340 G-Logger three-channel, portable data acquisition system from Silicon Designs, Inc. (SDI) offers powerful Fast Fourier Transform (FFT) analysis and display, as well as real-time acceleration and GPS data collection and viewing, all within the same compact package.
2014-08-12
Article
AC17 test reporting begins in 2015. Initially it "gifts" applicable CAFE A/C efficiency credits, but leads to mandatory use. Industry also looks to reduce A/C-induced EV range loss from solar loading using films, glass, pre-ventilation.
2014-08-12
Article
Johnson Controls has opened a new crash test facility at its automotive seating headquarters in Plymouth, MI. One of the highlights of the facility is a Seattle Safety ServoSled that allows the automotive supplier to offer what it claims is the most accurate, standardized safety testing of seats globally through collaboration with its other testing facilities located in Burscheid, Germany; Changchun and Shanghai, China; and Yokohama, Japan.
2014-08-04
Article
HBM Inc.’s new industrial measurement amplifier enables users to make precise, dynamic measurements of raw and filtered torque, frequency, pulse, speed, and angle of rotation.
2014-08-04
Article
The SAB 32 shield connection clip from Conta-Clip provides a quick, simple connection when cables require shielding from interference.
2014-08-04
Article
The R&S SMW200A high-end vector signal generator from Rohde & Schwarz supports frequencies up to 20 GHz.
2014-08-04
Article
Sonoscan’s AW322 200 automated system for ultrasonic inspection of MEMS wafers images and identifies internal gap-type defects down to 5µm in size.
2014-08-04
Article
The Model XLUS88 subminiature, bidirectional tension/compression load cell from tecsis LP operates from 150 g to 1000 lb.
2014-07-30
Article
The Electric Power Research Institute has announced a collaboration with 8 automakers and 15 utilities to develop and demonstrate an open grid integration platform for plug-in electric vehicles (PEVs).
2014-07-29
Article
To develop an electric powertrain with a minimum noise level and minimized whining it is necessary to have accurate CAE simulation and precise criteria to assess whining noise.
2014-07-23
Article
In development of an advanced test engine to demonstrate fuel-saving and emissions-reducing technologies, the EPA is using ANSYS FORTÉ CFD software, giving its engineers the ability to quickly and inexpensively make multiple design iterations.
2014-07-16
Article
Ram’s official move to adopt the SAE J2807 towing standard for validating all three (1500, 2500, and 3500) of its pickup weight classes raises the competitive bar for the industry's other pickup players. Meanwhile, Ford has engineered its latest F-450 with half the GCVW capability of a Class-8 tractor-trailer.
2014-07-15
Article
Opel recently broke ground on a €210 million expansion of its Rüsselsheim International Technical Development center (ITDC) that will be used to develop and test engines. The 36,000-m² (400,000-ft²) expansion will be completed in 2017.
2014-07-15
Article
Northrop Grumman Corp. broke ground on a new $20 million Maryland Space Assembly and Test (M-SAT) facility on its Baltimore campus adjacent to Baltimore Washington International Thurgood Marshall Airport.
2014-07-15
Article
VPT Inc. has added a comprehensive radiation laboratory and test services facility to its Chelmsford, MA, facility. The 5000-ft² VPT Rad facility, which will serve the radiation and related test needs of aerospace electronics manufacturers, provides specialized environments and equipment for evaluating electronics used in applications where ionizing radiation can degrade device performance.
2014-07-07
Article
Recently, with increased vehicle safety requirements, vehicle manufacturers are installing cutting-edge testing equipment in their own crash test facilities.Chrysler Group LLC partnered with Messring Systembau GmbH to upgrade Chelsea Proving Grounds, the central testing facility in Chelsea, MI.
2014-06-30
Article
Camber Corp. signed an agreement with Texas A&M–Corpus Christi (TAMUCC) to be the lead systems and business integrator for the Lone Star Unmanned Aircraft Systems Center (LSUASC) Test Site. The LSUASC is one of six unmanned aircraft systems (UAS) test sites identified by the FAA.
2014-06-20
Article
Omega’s PR-21 series of RTD (resistance temperature detector) sensors with M12 connector feature a welded 316L stainless steel housing and an integral 4-pin M12 connector for easy connection.
2014-06-12
Article
The cause of the issue was an error in the process Ford engineers used to correlate wind-tunnel testing into their Total Road Load Horsepower (TRLHP) factor that is key to the vehicle fuel economy models that are ultimately submitted to the U.S. EPA.
2014-06-11
Article
Reaction Design worked with a German premium automotive company to build cylinder-combustion simulations for a high-performance diesel engine with the goal of accurately and quickly predicting combustion performance and the effects of varied operating conditions on soot emissions.
Viewing 181 to 210 of 1062

Filter

  • Article
    1062