Criteria

Text:
Content:
Display:

Results

Viewing 61 to 90 of 485
2015-11-08
Article
The PW1900G engine model for Embraer's E190-E2 recently flew on P&W's 747SP flying test bed at the company's Mirabel Flight Test Center in Quebec, with the engine family sited as a 'climate solution.'
2015-11-02
Article
Additional in-house testing capabilities and the hiring of 180 engineers and technicians underscores an ambitious strategy to reach $15B in annual sales by 2020.
2015-10-28
Article
Skogforsk (the Forestry Research Institute of Sweden) has funded a KTH research initiative intended to help improve the suspension of forestry machines with the goal of achieving significant productivity improvements. KTH’s mission is to streamline the design process by validating the capability to simulate the operation of forestry machines under real-world operating conditions.
2015-10-03
Article
Technologies considered necessary for unmanned aircraft systems (UAS) to safely avoid other aircraft while moving through airspace recently were put to the test using NASA's remotely piloted Ikhana aircraft.
2015-09-11
Article
Endurica targets tire and rubber product developers with new software release. CAE software adds features for the analysis of rolling structures, self-heating, wrinkling, and cavitation.
2015-08-19
Article
The 2017 GT development program has begun testing in southeastern Michigan, with the exotic American supercars running “naked” as they rack up miles amid daily commuter traffic. Automotive Engineering encountered and photographed one of the off-tool prototypes recently.
2015-08-11
Article
A $2.5 million upgrade turns an existing climatic cell into one of the industry's most capable facilities for 4x4 and AWD vehicle development.
2015-07-28
Article
The 6DX PRO for gathering kinematic data for research and engineering validation was designed by DTS specifically for occupant dynamics and human injury assessment.
2015-07-23
Article
Physics-based robot simulation leveraging stochastic optimization and game theory will support new NASA missions.
2015-06-30
Article
Off-highway machine mounting systems, especially the cab mounting system, significantly affect the operator comfort in the cab by providing enough damping for a good ride and isolating the structure-borne forces from traveling into the cab.
2015-06-18
Article
Passenger Experience automates cabin completion processes with essential intelligent “building blocks” capturing rules, regulations, and manufacturing knowledge to automate cabin interior design, development, and delivery.
2015-06-12
Article
Small, electrically driven propellers spaced along wing leading-edges could benefit both small and medium-size aircraft
2015-06-09
Article
New surface scanning technology is being utilized by rFpro to produce digital road models with unprecedented accuracy and speed to help make autonomous driving safer.
2015-06-09
Article
To reduce cost and improve performance in engines, Honeywell is offering a software tool to embed virtual sensors in engines, using first-principles models that resides in the engine control unit.
2015-06-09
Article
For the design process of the class of aircraft known as an efficient supersonic air vehicle, particular attention must be paid to the propulsion system design as a whole, including installation effects integrated into a vehicle performance model.
2015-05-14
Article
The newly named Johnson Controls Vehicle Engineering Laboratory, on the Lawrence Technological University campus in Michigan, will serve the energy-storage-system supplier and benefit LTU engineering students.
2015-04-30
Article
New AWD systems from BorgWarner and Honda deliver significant improvements in efficiency, as well as vehicle dynamic performance.
2015-04-29
Article
One of the key differentiators of the EP-8100 for commercial and military simulation and training is the system’s ability to use customers’ existing databases.
2015-04-24
Article
The engine bay is an essential component of the AgustaWestland AW609 tilt rotor nacelle, since it determines the performance of the engine and assures safe maneuvers for every flight condition.
2015-04-13
Article
The Ohio State University student team revealed the vehicle it will use to try to break its own world land speed record—307 mph—with an over 400-mph mark. The 38-ft-long (11.6-m) vehicle contains 2000 A123 pouch cells and runs a four-wheel-drive system with two motors design-rated at 3000 hp (2238 kW).
2015-03-31
Article
Gill Sensors & Controls offers the GScondition monitoring sensor range family to reduce unplanned breakdowns in industrial machine applications.
2015-03-24
Article
In the area of electronics enclosures, traditional metal structures conduct and spread heat over large surfaces, but composites act as insulation. Heat generated by components causes internal temperatures to rise and has detrimental impact on the performance and reliability of the electronics.
2015-03-18
Article
Keysight Technologies has enhanced its B1505A power-device analyzer/curve tracer, allowing it to characterize all key parameters of on-wafer and packaged devices for semiconductor development.
2015-03-05
Article
Applus IDIADA listened to customer feedback in developing its new DynaWheel-III device, focusing on making the system even more reliable and easy-to-use. The wheel position measurement system is composed of two separate parts: the mechanical arms with six absolute optical encoders and the new electronic box (DW-Box), providing real-time calculation of wheel position.
2015-03-03
Article
To sharpen a significant aspect of its marque identity, a tunnel is at the heart of company’s new €4.5 million Lighting Assistance Center (LAC) at its Ingolstadt, Germany, headquarters is helping it develop new technologies including matrix laser forward lighting.
2015-02-25
Article
Delcam’s 2015 version of its PowerINSPECT inspection system includes automatic collision avoidance, faster import of large CAD files, quicker preparation of longer inspection reports, and improved display of results from point-cloud data, plus many other customer-requested enhancements.
2015-02-19
Article
Conventional CT scanners cannot accommodate long or bulky aircraft components.
2015-02-12
Article
NASA has expanded its use of Exa's PowerFLOW software for the simulation of concepts to reduce aircraft noise within NASA's Environmentally Responsible Aviation project.
2015-02-03
Article
LaVision’s internal combustion optical sensor product family provides a series of techniques for the measurement of quantitative, in-cylinder, engine-relevant values.
2015-02-03
Article
Intertek recently acquired an ETS Solutions vibration and mechanical shock system that will enable the company to double its existing capacity on high payload testing.
Viewing 61 to 90 of 485

Filter

  • Article
    485