Criteria

Text:
Content:
Display:

Results

Viewing 481 to 510 of 1067
2012-03-26
Article
Sustainability provides an opportunity to affect a fundamental shift in the market—seizing this opportunity can give businesses a significant competitive advantage.
2012-03-22
Article
The energy emitted from testing engines has found a powerful, second life at a General Motors engineering center.
2012-03-19
Article
Horiba Automotive Test Systems (ATS) has been contracted by Caterpillar Inc. to provide three heavy-duty test cells and one generator test system for the company’s new production base in Tianjin, China, by the start of production in January 2013.
2012-03-16
Article
Nissan’s goal with the DeltaWing experimental racecar is to explore new technologies for road cars. But it is a racecar, after all, and the Nissan DeltaWing will strut its motorsports stuff for the first time this June at the Le Mans 24 Hours.
2012-03-16
Article
Horiba’s new MEXA-1400QL-NX laser spectroscopic analyzer, featuring the principles of quantum cascade laser (QCL) technology, provides real-time simultaneous measurement of four nitrogen components contained in motor exhaust gas (NO, NO2, NH3, N2O). The technology will be on display in April at the SAE 2012 World Congress in Detroit.
2012-03-14
Article
Based on Nissan NV200 compact van, the new taxi could boost fuel economy 37% over the Ford Crown Victoria, the widely-used choice today. The 10-year contract with NYC includes provision for an all-electric version to be introduced by 2017.
2012-03-02
Article
Aveos signed a five-year agreement for the repair and overhaul of Snecma's CFM56-5 platform engines and Line Replaceable Units (LRUs). Aveos has been providing MRO engine capacity to Snecma for almost 15 years, according to Paul Lochab, Chief Commercial Officer, Aveos Fleet Performance.
2012-02-23
Article
API Technologies’ Spectrum Sensors advanced thermal sensors provide good thermal tracking in rugged environments.
2012-02-23
Article
Uson’s Optima vT leak and flow tester includes one or two test channels with four sensors each, customizable pneumatics, multiple built-in automated calculators, and data handling and storage options.
2012-02-21
Article
Setra Systems’ AccuSense Model ASM ultrahigh-performance pressure transducer is designed to provide accuracy, stability, and overpressure protection within demanding test environments.
2012-02-20
Article
With increasing complexity of automotive electronics and software making life difficult for engineers, IBM and Elektrobit integrate tresos inside Rational Rhapsody to help develop systems compliant with the AUTOSAR standard.
2012-02-15
Article
Norwegian start-up’s easy-to-use NDT technology for carbon fiber-reinforced plastics has been adopted by EADS.
2012-02-14
Article
Thermal management of a battery pack is one of the main factors to be considered in the pack design, especially for those with indirect air or indirect liquid cooling since the cooling medium is not in contact with the battery cells.
2012-02-13
Article
The United Nations Economic Commission for Europe (UN ECE) on Jan. 4 published the 03 series of amendments to Regulation No. 29 on commercial vehicle cab safety which introduces some significant amendments to the pendulum impact test procedures, according to InterRegs, an online resource for global vehicle safety and emissions regulations.
2012-02-10
Article
A TARDEC team has been working with a suspension OEM to assess the possible improvement and feasibility of integrating a magneto-rheological semi-active damper suspension into the Stryker Family of Vehicles.
2012-02-10
Article
The IPETRONIK M-RTD compact, four-channel analog mobile data-acquisition module is designed to support extreme vehicle testing requirements over an operating temperature range of -40 to +125°C (-40 to +257°F).
2012-02-01
Article
Kistler’s miniature PiezoBeam transducer electronic data sheets accelerometers were designed for multichannel modal and structural analysis and full-vehicle testing.
2012-02-01
Article
GammaTech Computer offers the Durabook R13C rugged convertible computer.
2012-02-01
Article
Thermo-Calc Software and QuesTek Innovations have jointly developed TC-Prisma, a software package for modeling precipitation in multicomponent and multiphase systems.
2012-02-01
Article
Molex Inc., an Illinois-based global electronic components company, has completed the acquisition of Temp-Flex Cable Inc., a designer and manufacturer of specialty wire and cable products for the aerospace, military, electronics, test and measurement, and industrial markets, among others.
2012-01-27
Article
The U.S. Air Force awarded Lockheed Martin a $21.5 million contract to provide a Launch and Checkout Capability (LCC) to command and control all GPS III satellites from launch through early on-orbit testing.
2012-01-26
Article
Canadian researchers are finding ways to reduce landing noise in a facility designed to study the sounds that come from the interaction of certain airplane parts and wind.
2012-01-20
Article
Though supportive of the decision by NHTSA, the U.S. National Highway Traffic Safety Administration, to close its investigation related to cases of unintended acceleration in some Toyota models, an arm of the National Academies has issued a report describing as "troubling" NHTSA's inability to convincingly address public concerns about the safety of automotive electronics.
2012-01-19
Article
Hyundai is investing $15 million (USD) to build a hot/cold environmental test center at its Michigan technology campus to boost its in-house testing capabilities.
2012-01-13
Article
Pickering Interfaces’ 40-784 is a 3U PXI microwave switch unit that supports one or two microwave switches in just two slots of 3U PXI and comes in two configurations and three frequency ranges.
2012-01-09
Article
Bruker has a new tool, the NPFLEX-LA optical microscope, for measuring shaft smoothness.
2012-01-09
Article
Long-term operation with B20 at the current specification limits for alkali and alkaline earth metal impurities can adversely impact the performance of DOC, DPF, and SCR systems.
2012-01-06
Article
AMETEK Inc. has acquired Technical Manufacturing Corp. (TMC), a provider of high-performance vibration isolation systems and optical test benches used to isolate highly sensitive instruments for the microelectronics, life sciences, photonics, and ultra-precision manufacturing industries.
2012-01-03
Article
By reusing test components, developers can standardize the way they stimulate, visualize, and analyze data, regardless of the development stage.
2012-01-03
Article
Kistler recently completed work on its new North American Technical Center, a 20,000-ft² (1900-m²) sales, training, and application-support facility located in Novi, MI. It offers Detroit-area customers fully dedicated on-site technical product sales, service, and applications engineering expertise, as well as A2LA-accredited calibration services, for automotive testing (including crash testing), vehicle dynamics, manufacturing assembly joining, and in-laboratory test requirements.
Viewing 481 to 510 of 1067

Filter

  • Article
    1067