Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1047
2017-07-17
Article
Virtual-reality innovations are emerging as crucial new weapons to enhance - and abbreviate - the automotive product-development process.
2017-07-07
Article
The 418th Flight Test Squadron at Edwards Air Force Base is currently assessing a new parachute for the Advanced Concept Ejection Seat II that will improve safety and expand the acceptable personal weight range of aircrew.
2017-07-02
Article
On June 28, 2017, days ahead of the July 2017 U.S. Air Force light attack aircraft experiment, the Senate Armed Services Committee passed a preliminary vote for a proposed annual defense budget that included $1.2 billion for “a fleet of Light Attack/Observation aircraft.”
2017-06-30
Article
Advances in engineering knowledge and CAE led to Achates Power's transformative engine design.
2017-06-27
Article
Recently NASA researchers were officially cleared to begin formal feasibility studies on advanced Unmanned Aircraft System (UAS) concepts under NASA’s Convergent Aeronautics Solutions (CAS) project. The investigations, three in total, are expected to take between 24 and 30 months to complete.
2017-06-27
Article
The new vehicle test center in Auburn Hills, MI, will feature a chassis dyno for emissions testing, powertrain development programs and benchmarking.
2017-06-16
Article
Soon, new vehicles will be able to communicate back and forth with each other and with traffic signals.
2017-06-16
Article
In a production vehicle that Tula tested, conventional operation yielded what was termed an “objectionable” audible boom at 47 Hz with production calibration. However, under DSF operation all firing patterns resulting in frequencies between 44 Hz and 48 Hz were avoided.
2017-06-13
Article
Low Speed Pre Ignition (LSPI) is an abnormal combustion event with the potential to cause catastrophic damage to pistons and other components in downsized engines.
2017-05-18
Article
PCB Piezotronics, Inc.’s family of miniature triaxial ICP accelerometers, Models 356A43, 356A44 and 356A45, are small (0.4 x 0.4 x 0.75 in/10.2 x 10.2 x 19.05 mm), lightweight (4.2 g/0.15 oz) and TEDS (Transducer Electronic Data Sheets) IEEE 1451.4 enabled.
2017-05-17
Article
The accuracy of an NO gas sensor (the primary component of NOx) can be compromised when exposed to ambient temperatures above 86°F (30°C) and significantly more so above 104°F (40°C).
2017-04-20
Article
Exa Corp. is focusing on the vital and sometimes overlooked aspect of automated drivin: keeping onboard camera lenses and other sensor surfaces clean in all road conditions.
2017-04-20
Article
A new state-of-the-art wind tunnel beginning construction in Ohio in 2017 will add to Honda's growing R&D footprint in the U.S.
2017-04-19
Article
Desire for quicker turnaround and more in-depth analysis point to increased automation of ECU testing.
2017-04-18
Article
With Kistler’s KiBox, information about combustion, injection valve actuation and ignition can be reliably captured, processed and viewed in the familiar INCA environment, among others.
2017-04-06
Article
Low temperature combustion (LTC) remains an area of high interest with extensive research, even though many challenges must still be overcome before LTC sees commercial acceptance.
2017-03-13
Article
PRQA features updates to its static application security testing (SATS) solutions for the C and C++ languages, QA·C and QA·C++.
2017-03-04
Article
Euro NCAP will establish a separate category for autonomous vehicles, but there is not likely to be one for cars that are claimed to protect all occupants from serious injury or death.
2017-03-03
Article
Making off-highway equipment, such as construction or agriculture machines, more efficient continues to be a priority after the final phase-in of the U.S. EPA Tier 4 Final emissions regulations. “Some of the companies we work with are running out of credits and unfortunately still struggling with Tier 4,” explained Tristan Donley, Technical Director, Off-Highway Heavy Vehicles North American for Exa, a supplier of software for computational fluid dynamics (CFD).
2017-02-10
Article
Diversified Technical Systems' (Seal Beach, CA) SLICE PRO LAB system offers the same electronics and flexibility as its crash-hardened SLICE PRO data acquisition modules, but in laboratory enclosures, making it suitable for a variety of static testing such as crash test dummy calibration.
2017-01-19
Article
Ten transmission ratios feel ideal in Ford's full-size pickup equipped with the 3.5-L V6 and the new 10R80 planetary automatic.
2017-01-18
Article
Artificial intelligence is the computer science that will make fully autonomous vehicles practical.
2017-01-13
Article
Range anxiety is not just affecting EV drivers on the road; it is also a significant hurdle for Formula E teams on the track. U.K. simulator specialist rFpro says its technology can help.
2017-01-09
Article
CEO John Krafcik told the Automobili-D audience in Detroit that Waymo is building its own hardware suite with a fully top-to-bottom, full-stack approach. The classic auto industry vertical integration includes all vision sensors, radars and LiDAR, along with related “AI compute” artificial-intelligence platform.
2017-01-07
Article
Motion sickness in autonomous vehicles is the new "elephant in the room," with engineers suffering during autonomous-driving simulator runs. Researchers are working to solve this nasty issue.
2017-01-03
Article
With the new SCALEXIO LabBox, dSPACE offers a compact high-performance system for hardware-in-the-loop tests.
2017-01-03
Article
DynPro₂ from Taylor Dynamometer is a data acquisition and control system that provides one common platform for engine, vehicle and industrial component testing.
2017-01-03
Article
NRL scientists have demonstrated metallic spin filtering at room temperature using ferromagnet-graphene-ferromagnet thin film junction devices.
2016-12-20
Article
Industrial aluminum slabs are typically produced by blending small amounts of copper or manganese in a reservoir of molten aluminum that is rapidly cooled, a process known as direct-chill casting. Variations in the way these elements solidify can yield uneven results that weaken the final product.
2016-12-07
Article
Christopher Grundler, the Director of OTAQ for the U.S. EPA, answered questions about Phase 2 rule-making for heavy trucks, global harmonization of emissions regulations, and his outlook for a new national NOx standard. Grundler will be the featured speaker on opening day of the SAE 2017 Government/Industry Meeting taking place January 25-27 in Washington D.C.
Viewing 1 to 30 of 1047

Filter

  • Article
    1047