Criteria

Text:
Category:
Display:

Results

Viewing 1 to 13 of 13
2015-06-04 ...
  • June 4-5, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
Quality Function Deployment (QFD) is an excellent technique for determining and understanding customer requirements and then translating these requirements into your company's internal technical language for use in product design through final assembly. QFD is a method for converting customer requirements into company requirements. The first day of this two-day program provides practical strategies and benefits of the successful QFD technique. On the second day, you will receive additional details to enhance the QFD technique.
2015-08-03 ...
  • August 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Through the years there has been a significant and increasing volume of fraudulent and counterfeit electronic parts entering the aerospace supply chain. Left undetected, these parts can pose significant performance, reliability, and safety risks. In response to these threats, the SAE AS6081 Counterfeit Electronic Parts Avoidance – Distributors standard was developed to provide uniform requirements, practices, and methods to mitigate the risk of electronics distributors purchasing and supplying these counterfeit electronic parts throughout the aerospace supply chain.
2015-08-05 ...
  • August 5, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Counterfeit electronic parts have been found in almost every sector of the electronics industry and continue to be an increasing threat to electronic hardware. This threat poses significant performance, reliability and safety risks. Aerospace industry organizations, in particular, must produce and continually improve safe and reliable products that meet or exceed customer and regulatory authority requirements.
2015-08-10 ...
  • August 10-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 9-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2015-09-10 ...
  • September 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include identifying proper design dimensions and tolerances, achieving robust designs, generating predictive math models that describe physical system behavior, and determining ideal manufacturing settings. This seminar utilizes hands-on activities to help you learn the criteria for running a DOE, the requirements and pre-work necessary prior to DOE execution, and how to select the appropriate designed experiment type to run.
2015-11-16 ...
  • November 16-18, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Internal audits are a requirement of the AS9100 Rev C standard and one of the fundamental requirements of the internal audit program is to verify the compliance of the organization’s quality management system to the AS9100 standard. Internal auditors must be knowledgeable of these requirements and the expectations as identified in the standard. In addition, the requirements of AS9101Rev D have significantly changed the way audits are expected to be performed in the Aviation, Space and Defense industries.
Training / Education Classroom Seminars
This seminar is suggested for product or process experts who have a need to utilize more detailed information concerning Design of Experiments analysis. It primarily addresses the subject of ANOVA, analysis of variance, which is a statistically based, objective decision-making tool. This is an advanced seminar that covers the fundamentals required to analyze orthogonal experiments, interpret, and recommend further action based on the analysis. Emphasis is placed on the analysis phase of the DOE process.
Training / Education Classroom Seminars
Individuals responsible for quality management system, implementation, and transition to the AS9100:2009 series of standards for Aviation, Space, and Defense will require an understanding of the requirements for the preparation and execution of the audit process as defined in these revised standards. Management and implementers of AS9100:2009 Rev. C within these organizations must also be aware of what these changes may mean for their company.
Training / Education Classroom Seminars
One of the main advantages of the precision forging process is the reduction in material consumption due to the achievement of close tolerances and the reduction of machining requirements to meet final component specifications. However, to achieve these results comes at a cost. One of the primary issues with precision forgingis the reduction in life of the tools used in the forming process. Manufacturers can mitigate some of these concerns by better understanding how tools can be designed specifically for the precision forging process and how personnel can effectively apply precision forging techniques.
Training / Education Classroom Seminars
This four-day workshop will provide you with fundamental knowledge and hands-on practice with the Advanced Product Quality Planning process and key tools. Topics addressed include the overview and application of the APQP process, Failure Mode and Effects Analysis, Control Plans, and Error Proofing. The program is designed for all levels of design and manufacturing personnel, as well as more experienced engineering and management personnel, especially for those involved in developing new products or processes. Why All Four Topics Together? APQP, FMEAs, Control Plans, and Error Proofing are all interrelated and build on each other.
Training / Education Classroom Seminars
Design of Experiments is a statistically based, structured approach to product or process improvement that will quickly yield significant increases in product quality and subsequent decreases in cost. Products and processes can be designed to function with less variation and with less sensitivity to environmental factors or customer usage. While still maintaining high quality from a customer's viewpoint, products and processes can utilize lower cost materials and methods. Specifications can be opened-up with wider tolerances while still maintaining high quality for customers.
Training / Education Classroom Seminars
Based on your test data or process data, do you ever wonder if: An improved product really performs better? A substitute material really processes the same? A cheaper material really performs satisfactorily? What confidence do you have in the final decision that you make? This seminar will help individuals responsible for product or process development and testing to statistically assess the variation of the product or process performance and make effective decisions with confidence.
Training / Education Classroom Seminars
As competition for market share increases, so does the need to monitor processes and quality to ensure top-notch products. This hands-on seminar will provide you with the skills to apply and maintain statistical process control to assist your organization in the improvement of various processes to achieve higher percentage yield or higher quality products or services. Quality characteristics (process outputs to track), measurement systems, sampling strategies, types of control charts, construction of control charts, and control chart interpretation will be covered.
Viewing 1 to 13 of 13

    Filter