Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 140
2017-04-27
Magazine
Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
2017-03-30
Magazine
Designing Electronic Warfare to Regain Airborne Military Dominance Certifying Composite Designs for Aerospace and Defense Electric Rockets and the Future of Satellite Propulsion Flat Cable Technology for Aerospace Applications XPONENTIAL 2017 – An AUVSI Experience Pulse Analysis Techniques for Radar and Electronic Warfare Reconfigurable Radio Tracks Flights Worldwide Development of an Optically Modulated Scatterer Probe for a Near-Field Measurement System Using Dempster-Shafer Fusion for Personnel Intrusion Detection Angular Random Walk Estimation of a Time-Domain Switching Micromachined Gyroscope Using Fisher Information Criteria for Chemical Sensor Selection via Convex Optimization Methods Luminescence Materials as Nanoparticle Thermal Sensors
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2015-10-01
Magazine
Powering on Rolls-Royce's Chief Engineer discusses how new technologies in the Trent XWB family of engines are inspiring current R&D design and evaluation work as part of its strategic roadmap for future big fanjets. Ongoing development work and associated test programs extend across a broad range of activities and involve many partners. Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.
2015-06-01
Magazine
Regional and bizjets refined and redefined As the regional and business jet markets steadily rebound, so too do the propulsion technologies that will provide airframers and their customers competitive advantage. Getting it right with composites With composites now a mainstay in most new aircraft designs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-04-01
Magazine
Propulsion Fanjet Evolution - the Next Steps Composites Dry Drilling Composites Using Carbon Dioxide Cooling
2014-06-02
Magazine
Europe's aerospace industry looking confident Apart from Airbus's highly visible presence in defense and commercial aircraft, Europe also has successful capabilities in helicopters, business jets, and aero engines, and in all these areas their global market share is growing. Comparing blade-element momentum modeling to 3-D CFD Many small unmanned aerial vehicles (SUAVs) are driven by small scale, fixed blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the SUAV itself.
2014-04-01
Magazine
Toward smarter manufacturing and materials At the U.K.'s new Advanced Manufacturing Research Center, engineers and innovators have at their disposal some of the world's most advanced design and manufacturing assets for precision engineering. More electric, integrated fuel systems Engine system reliability can be improved by advanced electric architectures, while the reduction of hydraulic components, fuel tubes, and fittings can enhance the maintainability of the engine and minimize pilot workload.
2014-03-05
Magazine
Into the DEAP The Distributed Electrical Aerospace Propulsion project looks toward a future optimized integrated propulsion system that will allow cleaner, quieter, and more efficient performance to be incorporated into a radically innovative airframe that will feature enclosed electrically powered fans. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products. To maintain efficiency while continuously improving the quality of products, it is necessary to be able to manage this data in an efficient manner.
2014-02-03
Magazine
Thermal simulation and testing of expanded metal foils for lightning protection With the implementation of major aircraft structures fabricated from carbon fiber reinforced plastic materials, lightning protection has become a more complicated issue for designers and engineers to solve. Electronics take charge Digital controls are handling more engine control tasks on a wider range of aircraft.
2013-10-01
Magazine
High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Camelina-based biofuel shows advantages in turboprop Researchers within the government of Canada see the need to improve the emissions performance of the Rolls-Royce T56 engine, which despite its age remains a workhorse for its military aircraft fleet.
2013-09-04
Magazine
Low risk, high gain stakes in aerospace design With the aerospace world pulling back from groundbreaking, high-risk aircraft designs, how are PLM and CAE suppliers adapting in providing solutions?
2013-06-03
Magazine
Filling the space A look at the changing face of manned spaceflight and the commercialization of orbital access. Distribution of power When designing the electrical distribution system for a turboelectric architecture, it is imperative to select technologies that will provide the highest efficiency and stability for the propulsion system.
2013-04-01
Magazine
PEFCs to transform UAVs Advancements in polymer electrolyte membrane fuel cells have resulted in longer endurance missions for smaller UAVs as well as an enabler for electric aircraft that require vertical takeoff and landing capability. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher quality point-to-point air transport.
2013-03-06
Magazine
Big fans gear up for new battles The big difference in newer commercial airplanes comes where it can't be seen: in the structure, in new materials, in the avionics, and most importantly, in the engines. Integrated Vehicle Health Management The aims of IVHM include improved safety through the use of diagnostics and prognostics to fix faults before they are an issue, as well as improve availability of fleets through better maintenance scheduling.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2012-03-14
Magazine
Propulsion systems enabling private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry.
2011-10-26
Magazine
An icy reception Next-generation propulsion systems for next-generation aircraft still have to address an (ice) age old problem.
2011-10-12
Magazine
Digital aerospace gets dynamic Aerospace design is advancing from the static to the dynamic as PLM and simulation tools enable systems architects to design validated systems earlier in the process. Internet connectivity goes worldwide Coverage permitting Web access is growing and getting faster.
2011-09-07
Magazine
Hypersonic possibilities When it comes to reviving high-speed air travel, it all comes down to propulsion, propulsion, propulsion. Shrinking electronics help fuel rising usage Integration helps UAVs carry more sensors and send data faster, making unmanned aircraft more valuable. A greener flight path 'Eco-efficient Innovation Leading the Future of Aviation' is the theme of SAE's 2011 AeroTech conference to be held OCt. 18-21 in Toulouse, France. Manufacturing advanced materials A look at some of the challenges of additive layer manufacturing, as well as the advantages it brings to the aerospace industry.
2011-06-08
Magazine
Avionics go to war Advanced helmet sight systems are being designed to help the situational awareness of those pilots who actually still fly aircraft, while also being seamlessly integrated with the aircraft itself. Model military engine behavior While the concept of a variable cycle engine is not new, recent advances in engine architecture technology suggest that adding a second bypass stream to a traditional turbofan can provide significant benefits. Alternative seals for alternative fuels When considering seal compatibility an aircraft from traditional jet fuel to a synthetic fuel presents an interesting technical challenge that has both financial and practical considerations, especially for aircraft that are already in service.
2011-03-02
Magazine
Materials become design, design becoems function Once things you could hold in your hand, materials have become more design ideas than entities, and the designs themselves are transforming into operational activity. The next steps in flight A look at sero engine and assembly developments as commercial airframe and engine manufacturers begin the biggest battle of all-for next-generation short-haul jet aircraft sales. NextGen Today and tomorrow The FAA has reached a major milestone on the Next Generation Air Transportation System initiative to modernize America's National Airspace System. Stacking the material deck for the 787 Combinations such as composites and titanium being used in future aircraft programs can be very challenging when drilling holes during manufacturing and assembly operations.
2010-09-15
Magazine
Powering the future To achieve sales of more than 1000 engines a full two years ahead of the first flight of the aircraft it is being built to power gives an indication ofthe high customer expectations from the most advanced in a long line of engines from Rolls-Royce.
2010-09-08
Magazine
The open rotor engine in the 21st century After consideration in the 1980s, the open rotor turbine engine for aircraft is given another chance. Will today's engineering tools make it more viable this time?
2010-07-21
Magazine
More technology, less fuel Engine makers use several techniques to improve efficiency, cut emissions.
2010-06-23
Magazine
Fast-track propulsion testing Whether it is compressor refinement or complete test programs for next-generation aircraft, the level of propulsion system development in Europe seems to be ever-increasing.
2010-04-28
Magazine
Propulsion challenges Universities and research institutes in the U.K. are playing an ever-growing role in EU aerospace development projects as well as maintaining an independent industry workload.
2009-12-23
Magazine
Optimizing components for greener combustion Research agencies and engine manufacturers around the world tackle combustion with new materials, configurations, and fuels.
Viewing 1 to 30 of 140

Filter

  • Magazine
    140