Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1969
2017-03-02
Magazine
Thought leadership at WCX17 Lucid Motors’ David Moseley: EV or ICE, “It is all physics” New eye on the road One of the industry’s hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye’s co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France’s MCE-5.
2017-03-01
Magazine
‘Not just a student club’ How the University of Toronto Aerospace team (UTAT) came to redefine the mission and structure of the design team. Success doesn’t come by chance In an SAE International technical paper, students at the University of Idaho identify best practices for their SAE Clean Snowmobile Challenge team. Winning formula Auburn University team hopes to carry forward the momentum of victory at the 2016 Formula SAE Lincoln competition into 2017.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-12-22
Magazine
Thought leadership at WCX17 Magna's CTO talks innovation and disruption at WCX17, the newly rebranded SAE World Congress. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. New EEAs for the connected, autonomous future OEMs and their Tier-1 partners are revamping vehicle electronic and electrical architectures with "über brain" central computers and real-time Ethernet to feed tomorrow's data-hungry cars and trucks. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Autonomy, connectivity headline the 2017 Consumer Electronics Show The automotive component of CES expands as global anticipation for automated driving and enhanced connectivity intensifies. Editorial: Vital Transformation Supplier Eye The impact of shifting to the 'softer' side.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-12-01
Magazine
Editorial: What's old (and revered) is new again Toyota sticking with measured, 'Teammate' approach to autonomous development Straight-sixes are back (with electrification) at Mercedes-Benz McLaren faces the electrified and autonomous future Can low-volume supercars survive amid stringent CO2 regs and robot cars? McLaren is betting £1 billion on a speedy, powerful-and independent-sports-car future. New Peugeot SUVs jump to modular platform, increase composites use Mercedes EQ concept previews 2019 electric SUV 2017 Nissan Rogue adds hybrid system with EV-only mode Renault's kids' racer
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-11-03
Magazine
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
2016-11-01
Magazine
The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-10-03
Magazine
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-06-02
Magazine
A 24-hour battle of speed and efficiency At Le Mans this month, amped-up hybrid prototype racecars from Audi and Toyota face a revamped Porsche 919 hybrid, while Ford hopes to recapture glory with its new GT-R. Pushing the ICE forward, gradually Emergent technologies from BorgWarner, Eaton and Mahle aim for greater efficiency in gasoline and diesel engines. Smile, you're on Magna camera! Magna Electronics is rapidly expanding production of its made-in-U.S.A. onboard cameras to keep pace with booming OEM demand for safety and vehicle-autonomy vision-systems technology. Multi-material body solutions: Possibilities and manufacturing challenges The body-in-white is a prime target for lightweighting and many automakers are pursuing unique and effective multi-material approaches, but improved design tools and processes might yield greater gains.
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-05-05
Magazine
New dawn at Honda R&D President Yoshiyuki Matsumoto aims to invigorate Honda's technology and product-development organization with 'full soul.' Automated driving meets regulation: NHTSA and the next 50 years The challenges and opportunities on the road to 'zero deaths' demand a new level of federal automotive safety technical standards, and a new safety-defect reporting and recall system. NHTSA and the U.S. Congress must act boldly and quickly to make it happen. Autonomous driving meets regulation: Hands off, eyes off, brain off Euro NCAP'S president warns that without coherent policies, the growing availability of automated technologies may result in piecemeal technology development-and unintentional consequences. Designer yin meets engineer yang Efficient and effective vehicle development means even closer collaboration between the two former sparring partners.
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-07
Magazine
Defying the disruptors and driving innovation Four top engineering executives discuss how their "traditional" companies are finding new technology opportunities and business growth amid the start-ups-and are even doing some disrupting themselves. Preparing for a 48-volt revival The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Additive manufacturing enhances GTDI pistons Selective Laser Melting may help manufacture future gasoline-engine pistons with enhanced heat-transfer properties and reduced weight.
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2016-02-16
Magazine
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-02-03
Magazine
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive new gasoline and light-duty diesel ICEs. Citizen of the world Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about auto-mobility and aero-mobility 2050. CES rollouts extend connectivity, app integration Ford looks to spread Corning's new lightweight Gorilla Glass beyond the 2017 GT New 40%-scale wind tunnel increases GM's aero-development capacity Surface Generation speeds composites throughput with one-shot stamp-forming process 2017 Cadillac XT5 debuts GM's new lightweight crossover architecture Porsche and Bentley plan electric future
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
Viewing 1 to 30 of 1969