Criteria

Text:
Content:
Display:

Results

Viewing 91 to 120 of 201
2012-09-18
Collection
The 8 technical papers in this collection focus on kinetically controlled combustion. Experimental and simulation studies pertaining to various means of controlling combustion are welcome. Examples are research studies dealing with temperature and composition distribution inside the cylinder and their impact on heat release process. Studies clarifying the role of fuel physical and chemical properties in autoignition are also welcome.
2012-09-18
Collection
The 8 technical papers in this collection feature CI combustion technologies distinguished by 1) mixing processes that influence combustion; and 2) combustion phasing closely coupled to the timing of fuel injection. This includes the impact of the fuel injection and jet-mixing processes; impact of swirl/spray targeting on mixing processes; combustion chamber/engine geometry optimization; sources of combustion inefficiency; and the impact of operating conditions.
2012-09-18
Collection
The 12 technical papers in collection present work investigating the effect of fuel composition on CI engine performance in terms of combustion efficiency, emissions and engine hardware durability. Variations in fuel composition include: the inclusion of aromatic compounds, the blending of oxygenated components and the use of additives for cetane number improvement and lubricity enhancement.
2012-09-18
Collection
The 8 technical papers in this collection are devoted to experimental and computational work in the area of fuel injection systems and sprays. Topics include: spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects. Studies of gasoline, diesel and alternative fuel sprays and fuel injection equipment are encouraged.
2012-09-18
Collection
The 9 technical papers in this technical paper collection cover topics regarding new CI and SI engines and components. This includes analytical, experimental, and computational studies covering hardware development as well as design and analysis techniques.
2012-04-13
Collection
The 40 papers in this technical paper collection focus on advanced hybrid vehicle powertrains. Topics covered include plug-in electric vehicles, VHDL-AMS full vehicle simulation, in-wheel motors, opposed-piston free-piston linear generator, range extender engine, and more. The 40 papers in this technical paper collection focus on advanced hybrid vehicle powertrains. Topics covered include plug-in electric vehicles, VHDL-AMS full vehicle simulation, in-wheel motors, opposed-piston free-piston linear generator, range extender engine, and more.
2012-04-13
Collection
The 13 papers in this technical paper collection focus on fuel and additive effects on SI engine performance. Topics covered include bio-derived fuels, engine abnormal combustion, lubricant fuel economy performance, alcohol-gasoline fuel blends, ethanol-gasoline blends, butanol isomer combustion, and more. The 13 papers in this technical paper collection focus on fuel and additive effects on SI engine performance. Topics covered include bio-derived fuels, engine abnormal combustion, lubricant fuel economy performance, alcohol-gasoline fuel blends, ethanol-gasoline blends, butanol isomer combustion, and more.
2012-04-13
Collection
The 13 papers in this technical paper collection focus on direct injection SI Engine technology. Topics covered include in-cylinder fuel injection and spray studies, flow/spray interaction and in-cylinder mixture formation studies,DI-specific emissions, technologies enabled by DISI, and more. The 13 papers in this technical paper collection focus on direct injection SI Engine technology. Topics covered include in-cylinder fuel injection and spray studies, flow/spray interaction and in-cylinder mixture formation studies,DI-specific emissions, technologies enabled by DISI, and more.
2012-04-13
Collection
The 13 papers in this technical paper collection discuss SI combustion. Topics covered include studies of mixture formation, ignition, knock, engine efficiency, flame propagation, alternative fuels and emissions formation, and more. The 13 papers in this technical paper collection discuss SI combustion. Topics covered include studies of mixture formation, ignition, knock, engine efficiency, flame propagation, alternative fuels and emissions formation, and more.
2012-04-13
Collection
The 8 papers in this technical paper collection discuss EcoCAR Development. Topics covered include highlights of the entire EcoCAR vehicle development process, on-road testing, 2-mode front-wheel-drive hybrid-electric vehicle, inverter switching characteristics, and more. The 8 papers in this technical paper collection discuss EcoCAR Development. Topics covered include highlights of the entire EcoCAR vehicle development process, on-road testing, 2-mode front-wheel-drive hybrid-electric vehicle, inverter switching characteristics, and more.
2012-04-13
Collection
The 15 papers in this technical paper collection discuss fuel and additive effects on CI engine performance. Topics covered include barium additives, hydrous bioethanol, Pure Biodiesel, bio-derived diesel blends, and more. The 15 papers in this technical paper collection discuss fuel and additive effects on CI engine performance. Topics covered include barium additives, hydrous bioethanol, Pure Biodiesel, bio-derived diesel blends, and more.
2012-04-13
Collection
The 24 papers in this technical paper collection discuss mixing-controlled CI combustion. Topics covered include transonic combustion, nozzle flow number impact, dual-fuel combustion modes, swirl studies and ratios, and more. The 24 papers in this technical paper collection discuss mixing-controlled CI combustion. Topics covered include transonic combustion, nozzle flow number impact, dual-fuel combustion modes, swirl studies and ratios, and more.
2012-04-13
Collection
The 25 papers in this technical paper collection focus on fuel injection and sprays. Topics covered include spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, dissolved gas effects, and more. The 25 papers in this technical paper collection focus on fuel injection and sprays. Topics covered include spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, dissolved gas effects, and more.
2012-04-13
Collection
The 28 papers in this technical paper collection discuss multi-dimensional engine modeling. Topics covered include chemical kinetics, combustion and spray modeling, turbulence, mesh generation, and approaches targeting improved computational efficiency, and more. The 28 papers in this technical paper collection discuss multi-dimensional engine modeling. Topics covered include chemical kinetics, combustion and spray modeling, turbulence, mesh generation, and approaches targeting improved computational efficiency, and more.
2012-04-13
Collection
The 14 papers in this technical paper collection discuss high efficiency IC engines. Topics covered include engine downsizing, pressure boosting and turbocharging, intelligent combustion, low temperature and stratified charge, advanced fuel injection technologies, and more. The 14 papers in this technical paper collection discuss high efficiency IC engines. Topics covered include engine downsizing, pressure boosting and turbocharging, intelligent combustion, low temperature and stratified charge, advanced fuel injection technologies, and more.
2012-04-13
Collection
The 21 papers in this technical paper collection discuss powertrain control and calibration. Topics covered include signal processing, on-board diagnostic strategy development, sensor, actuator, electronic control unit designs, and more. The 21 papers in this technical paper collection discuss powertrain control and calibration. Topics covered include signal processing, on-board diagnostic strategy development, sensor, actuator, electronic control unit designs, and more.
2012-04-13
Collection
The 21 papers in this technical paper collection focus on combustion control and optimization. Topics covered include emissions, performance, engine combustion diagnostics, control, optimization, related combustion sensing, and more. The 21 papers in this technical paper collection focus on combustion control and optimization. Topics covered include emissions, performance, engine combustion diagnostics, control, optimization, related combustion sensing, and more.
2012-04-13
Collection
The 48 papers in this technical paper collection focus on exhaust emission control. Topics covered include the durability of particulate filters and exhaust catalysts, analysis of aged catalysts and filters, PF technologies, testing protocols, SCR technology, thermal stress resistance, and more. The 48 papers in this technical paper collection focus on exhaust emission control. Topics covered include the durability of particulate filters and exhaust catalysts, analysis of aged catalysts and filters, PF technologies, testing protocols, SCR technology, thermal stress resistance, and more. The 48 papers in this technical paper collection focus on exhaust emission control. Topics covered include the durability of particulate filters and exhaust catalysts, analysis of aged catalysts and filters, PF technologies, testing protocols, SCR technology, thermal stress resistance, and more.
2012-04-13
Collection
The 19 papers in this technical paper collection discuss exhaust emission control modeling. Topics covered include DOC, HC Trap, ammonia oxidation catalysts, hybrid or combined catalysts, urea-water solution spray dynamics, modeling aspects, and more. The 19 papers in this technical paper collection discuss exhaust emission control modeling. Topics covered include DOC, HC Trap, ammonia oxidation catalysts, hybrid or combined catalysts, urea-water solution spray dynamics, modeling aspects, and more.
2012-04-13
Collection
The 23 papers in this technical paper collection discuss new CI and SI engines and components. Topics covered include 3D engine simulation, fast ethanol cold starts, brushless motors, variable displacement vane pumps, lightweight deep skirt cylinder block, and more. The 23 papers in this technical paper collection discuss new CI and SI engines and components. Topics covered include 3D engine simulation, fast ethanol cold starts, brushless motors, variable displacement vane pumps, lightweight deep skirt cylinder block, and more.
2012-04-13
Collection
The 15 papers in this technical paper collection discuss CI & SI power cylinder systems. Topics covered include how to reduce friction and improve fuel economy, how to improve durability by understanding wear, how to improve oil consumption and blow-by, and more. The 15 papers in this technical paper collection discuss CI & SI power cylinder systems. Topics covered include how to reduce friction and improve fuel economy, how to improve durability by understanding wear, how to improve oil consumption and blow-by, and more.
2012-04-13
Collection
The 14 papers in this technical paper collection discuss engine boosting systems. Topics covered include turbocharger compressors, valve-event modulated boost systems, variable geometry compressor and turbine systems, centrifugal compressors, NOx reduction, and more. The 14 papers in this technical paper collection discuss engine boosting systems. Topics covered include turbocharger compressors, valve-event modulated boost systems, variable geometry compressor and turbine systems, centrifugal compressors, NOx reduction, and more.
2012-04-13
Collection
The 28 papers in this technical paper collection focus on transmissions and drivelines. Topics covered include controls hardware and software, controls integration, transmission NVH issues and design solutions, parasitic loss investigation, electronic limited slip differentials, CVT belt dynamic analyses, dual dry clutch testing, torque converter modeling, and more. The 28 papers in this technical paper collection focus on transmissions and drivelines. Topics covered include controls hardware and software, controls integration, transmission NVH issues and design solutions, parasitic loss investigation, electronic limited slip differentials, CVT belt dynamic analyses, dual dry clutch testing, torque converter modeling, and more.
2011-12-02
Collection
This technical paper collection contains 26 papers published from the 2011 SAE Brasil Conference.
2011-12-02
Collection
This technical paper collection contains 11 papers published from the 2011 SAE Brasil Conference.
2011-11-30
Collection
This technical paper collection contains 7 papers published from the 2011 Small Engine Technology Conference.
2011-11-30
Collection
This technical paper collection contains 9 papers published from the 2011 Small Engine Technology Conference.
2011-11-01
Collection
This technical paper collection contains 12 papers on new powertrains published from the 2011 Powertrain Fuels and Lubricants Conference.
2011-11-01
Collection
This technical paper collection contains 26 papers on HCCI combustion published from the 2011 Powertrain Fuels and Lubricants Conference.
2011-11-01
Collection
This technical paper collection contains 27 papers on SI combustion published from the 2011 Powertrain Fuels and Lubricants Conference.
Viewing 91 to 120 of 201

Filter

  • Collection
    201