Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 9 of 9
2015-10-05 ...
  • October 5, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
The challenges associated with using composites as a replacement for aluminum reside primarily in the complex manufacturing processes and technologies for fabricating composite parts. The high cost of composites material and its manufacturing complexity have been inhibitors to the wide transfer of this technology to the non-aerospace market. The search for solutions to high manufacturing costs and efficient manufacturing processes have resulted in intense research by government, aerospace industry companies, and space agencies worldwide.
2015-08-05 ...
  • August 5, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Counterfeit electronic parts have been found in almost every sector of the electronics industry and continue to be an increasing threat to electronic hardware. This threat poses significant performance, reliability and safety risks. Aerospace industry organizations, in particular, must produce and continually improve safe and reliable products that meet or exceed customer and regulatory authority requirements.
2015-08-03 ...
  • August 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Through the years there has been a significant and increasing volume of fraudulent and counterfeit electronic parts entering the aerospace supply chain. Left undetected, these parts can pose significant performance, reliability, and safety risks. In response to these threats, the SAE AS6081 Counterfeit Electronic Parts Avoidance – Distributors standard was developed to provide uniform requirements, practices, and methods to mitigate the risk of electronics distributors purchasing and supplying these counterfeit electronic parts throughout the aerospace supply chain.
2015-05-04 ...
  • May 4-5, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The requirements for producing an FAA approved replacement part can be daunting. Understanding the steps required in the FAA Parts Manufacturer Approval (PMA) process can greatly streamline the approval life-cycle and reduce unnecessary costs and delays, thereby shortening the time and cost to market. This course is designed for those organizations and individuals interested in designing and manufacturing replacement parts for civil aviation aircraft. This two-day course covers the crucial subjects and steps of the FAA-PMA approval process.
2015-03-09 ...
  • March 9-18, 2015 (5 Sessions) - Live Online
  • September 28-October 7, 2015 (5 Sessions) - Live Online
Training / Education Online Web Seminars
Through the years there has been a significant and increasing volume of fraudulent and counterfeit electronic parts entering the aerospace supply chain. Left undetected, these parts can pose significant performance, reliability, and safety risks. In response to these threats, the SAE AS6081 Counterfeit Electronic Parts Avoidance – Distributors standard was developed to provide uniform requirements, practices, and methods to mitigate the risk of electronics distributors purchasing and supplying these counterfeit electronic parts throughout the aerospace supply chain.
Training / Education Classroom Seminars
One of the main advantages of the precision forging process is the reduction in material consumption due to the achievement of close tolerances and the reduction of machining requirements to meet final component specifications. However, to achieve these results comes at a cost. One of the primary issues with precision forgingis the reduction in life of the tools used in the forming process. Manufacturers can mitigate some of these concerns by better understanding how tools can be designed specifically for the precision forging process and how personnel can effectively apply precision forging techniques.
Training / Education Classroom Seminars
The advancement of forging technologies and processes has enabled the increased use of forged products to meet the demanding requirements of strength, durability, and reliability. While forgings are commonly used in aerospace manufacturing, the ability to make use of precision forging processes and techniques is critical when manufacturing gas turbine components. Realizing the benefits of accuracy and quality that precision forging brings to product manufacturing requires those involved with design and manufacturing have an understanding of industry accepted technology and processes.
Training / Education Classroom Seminars
This one day seminar presents an overview of seals and sealing system design for military and commercial aircraft. It is aimed to provide engineers having some previous actuator and control valve design background with an understanding of the general hardware groove standards, standard parts for static applications and how seal designs and sealing systems can be best used in dynamic reciprocating and rotary applications. Information will be provided regarding seal material and fluid compatibility, friction drag, expected wear rates depending on operating conditions and duty cycle, hardware surface finish and topography.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meetings. This four hour short course intends to present an overview of seals and sealing system design for military and commercial aircraft. It is aimed to provide engineers having some previous actuator and control valve design background with an understanding of the general hardware groove standards, standard parts for static applications and how seal designs and sealing systems can be best used in dynamic reciprocating and rotary applications.
Viewing 1 to 9 of 9

    Filter

    Subtopics