Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1006
2016-08-26
Article
dSPACE and BTC Embedded Systems offer a solution that improves test depth for the real-time validation of safety-critical applications with extension of classical test methods, easier compliance with safety standards and optimal integration and cross-platform use.
2016-08-26
Article
The push toward miniaturization in the electronics industry has left designers little or no room for test points, and the expansion of high frequency technologies has resulted in a growing need for test equipment that has the capability to verify these types of very small circuits.
2016-08-26
Article
CNH Industrial and AVL researchers used simulation, test bench, and road testing of a demonstrator vehicle with a WHR system to show significantly reduced fuel consumption.
2016-08-15
Article
The MicReD Power Tester 600A from Mentor Graphics Corp. tests electric and hybrid vehicle (EV/HEV) power electronics reliability during power cycling.
2016-08-14
Article
Using simulators for RDE testing is a new aspect for the technology, experts say.
2016-08-12
Article
Anritsu Co. (Richardson, TX) introduces Cellular Module Test Application (CMTA) software for its Signaling Testers MD8475A/B, which provides test cases to simplify testing chipsets and automotive-related telematics modules used in connected car designs and implementation.
2016-08-08
Article
The dangers of faulty car airbags recently have become all too clear. The product-liability issues associated with airbags and the largest, most costly automotive recall in history make it essential to characterize them thermally at high speeds and with high levels of sensitivity and accuracy.
2016-07-31
Article
Delphi Automotive on August 1 announced an extensive autonomous-vehicle pilot program in Singapore, aimed at demonstrating cloud-based fully automated mobility on demand (AMoD) capability “at the [SAE] Level 4 performance level” by late 2019.
2016-07-31
Article
Made of steel and aluminum, NASA's Airvolt test stand was designed and fabricated to help researchers anticipate system integration challenges and verify and validate electric propulsion components.
2016-07-15
Article
Validation testing of the new 2-step VCR by several OEMs has been successful to date and is expanding, as the industry examines more sophisticated solutions to meet CO2 regulations.
2016-07-15
Article
Mississippi State University's Car of the Future, a hybridized Subaru BRZ with advanced software and 3D-priinted innovations, gets an estimated triple-digit mpg while improving acceleration.
2016-07-05
Article
Pickering Interfaces expands its range of PXI 50Ω 600MHz radio frequency (RF) multiplexers with 18 different configurations including a PXI two slot 32:1 configuration.
2016-05-31
Article
Stanford engineering professor David Lentink plans to use a new wind tunnel to learn the magic of bird flight and apply it to building better aerial robots.
2016-05-14
Article
Ann Arbor, Michigan is fast becoming the world capital of testing and research for connected cars, automated driving, and safety technology.
2016-05-13
Article
KTR has started up a test bench for large couplings that covers a performance range up to 500,000 N∙m at its headquarters in Rheine.
2016-05-13
Article
T/CCI Manufacturing’s Climatic Wind Tunnel in Decatur, IL allows customers to simulate any real-world condition by controlling humidity, wind, temperature, solar and road conditions up to100 mph.
2016-05-13
Article
A modular area view kit (AVK) from First Sensor aids in the setup of 360° all-around view systems for applications in special vehicles and machines.
2016-05-13
Article
Hermetic Seal Corporation (HSC), a unit of AMETEK Interconnect, has expanded its hermetic sealing capabilities to include state-of-the-art hermetic fiber-optic component manufacture.
2016-04-27
Article
Take-it-to-the-limit testing is typically reserved for vehicle development teams, but Jaguar's route and the sensational topography clearly gave Automotive Engineering good insight into F-Pace's dynamic capabilities and its four-year development.
2016-04-24
Article
Consortium of OEMs and suppliers worked on all fronts, while the SAE Interior Climate Control Committee reopened a suite of draft standards to prepare for possible importation of cars with R-744: CO2 as a refrigerant.
2016-04-20
Article
Experts say Phase Change Material (PCM) formulated for high latent heat capacity can provide cabin warmth for a typical U.S. daily commute, with residual capacity insulated for an EV parked during an eight-hour workday.
2016-04-20
Article
Ruetz System Solutions provides an interoperability test platform for Automotive Ethernet that constitutes a component of the test set-up for Open Alliance Layer 1 interoperability tests for ECUs.
2016-04-14
Article
Manufacturing and service teams are discovering ways to use AR technology to handle complex systems like wire harnesses.
2016-04-13
Article
The nCode brand of durability, test, and analysis software by HBM introduces nCode VibeSys, a new data processing system designed to help acoustics and vibration engineers.
2016-04-11
Article
Automakers are increasingly employing digital crash test dummies made of zeroes and ones to take the big hits in virtual vehicles.
2016-03-31
Article
Ford's 6.7-L diesel V8 has yet to obtain certified power ratings, but it's expected to exceed 900 lbft of torque, necessitating an upgrade of the company's dyno sleds to enable SAE J2807 vehicle tow testing.
2016-03-27
Article
Self-driving car project CEO John Krafcik discussed Google's work underway toward fully autonomous vehicles, at a recent NY forum. First likely market: the elderly and impaired.
2016-03-24
Article
In this Q&A, Toyota Technical Center President Seiya Nakao discusses future mobility development, technical innovation, Toyota's recent reorganization, and the ever-changing automotive engineering profession.
2016-03-14
Article
As airlines strive to move more and more people faster and faster, the talk of a future supersonic aircraft for commercial purposes is getting louder and louder.
2016-03-07
Article
The POSIWIRE sensor WS21 from ASM Sensors is designed for measuring ranges up to 20,000 mm.
Viewing 1 to 30 of 1006

Filter

  • Article
    1006