Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 263
2017-09-28
Magazine
Using Thermal Simulation to Model the Effects of Wind on the Mars Curiosity Rover Quality and Validation of Digital Designs for Aerospace and Defense Scaling LiDAR Optical Payloads from Drones to Miniature UAVs Using Sintered Fiber Metal Composites for Aircraft Acoustic Attenuation GaN Breaks Barriers RF Power Amplifiers Go Wide and High Test System Ensures Flawless Performance of Military RF Devices The Impact of Video Compression on Remote Cardiac Pulse Measurement Using Imaging Photoplethysmography Remote physiological measurement technique leverages digital cameras to recover the blood volume pulse from the human body. Sensitivity Simulation of Compressed Sensing Based Electronic Warfare Receiver Using Orthogonal Matching Pursuit Algorithm Calculate the sensitivity of a CS based EW receiver using two modulation schemes.
2017-08-04
Magazine
Opposed-piston engines: the powerplant of the future India's dream of an all-EV fleet by 2030: Myth, miracle, or reality? An approach for prediction of motorcycle engine noise under combustion load Innovations for lightweighting Tough U.S. fuel-economy bogies for 2021 and beyond are driving new approaches for materials, as seen in these examples. More intelligence equals more efficiency, enhanced functionality Advanced electronic systems require renewed focus on architectures, processors, sensors and networks. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will drive vehicle development in the near future, say industry experts attending the revamped SAE COMVEC 17 event.
2017-07-27
Magazine
The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.
2017-06-01
Magazine
Tackling NVH one dB per day New tools and technologies are helping engineers reduce vehicle Noise, Vibration and Harshness. Artificial intelligence becomes a reality Automakers could be among the leaders in deploying AI in free-standing, high-reliability environments. But developers must determine how to mitigate undesirable side-effects. Lidar: autonomy's mission-critical component Automated-driving capability likely won't happen without Lidar. But what technology-and at what price? Formula One goes longer, lower, wider for 2017 New rules make the cars faster and more aggressive-looking, with a wider track, wider tires and bigger wings. Editorial: Core Ford, New Ford...OneFord? SAE Standards News Seeking a common language for vehicle automation Supplier Eye Are you innovating for NVH?
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-05-05
Magazine
New dawn at Honda R&D President Yoshiyuki Matsumoto aims to invigorate Honda's technology and product-development organization with 'full soul.' Automated driving meets regulation: NHTSA and the next 50 years The challenges and opportunities on the road to 'zero deaths' demand a new level of federal automotive safety technical standards, and a new safety-defect reporting and recall system. NHTSA and the U.S. Congress must act boldly and quickly to make it happen. Autonomous driving meets regulation: Hands off, eyes off, brain off Euro NCAP'S president warns that without coherent policies, the growing availability of automated technologies may result in piecemeal technology development-and unintentional consequences. Designer yin meets engineer yang Efficient and effective vehicle development means even closer collaboration between the two former sparring partners.
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2016-01-06
Magazine
Time to get personal Industry engineers are combining apps, voice, the cloud, and other technologies such as artificial intelligence to enable drivers to customize their vehicles and anticipate their needs. Technology report GM and TARDEC co-developing fuel cell powered Chevrolet Colorado for military evaluation vehicles and anticipate their needs. Global vehicles Sports cars take center stage in Tokyo
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-11-03
Magazine
Active in aero Several automakers-notably Mercedes-Benz and Audi - used the Frankfurt Motor Show stage to reveal sleek vehicles that aggressively employ active aerodynamic elements and other advances to reduce drag. Composites permeate inside and out Composite materials are gaining popularity for both unseen structural components and for exterior eye candy. Powertrain testing: coping with complexity With increasing use of electrical components to extend the performance of conventional combustion engines, powertrain development has never been more complicated. The good news is that test and development engineers are harnessing advanced simulation techniques and computer processing to develop the most efficient and fun powertrains ever. Can ads help in vehicle-to-vehicle rollout? Porsche unveils new downsized, boosted 3.0-L boxer six. Johnson Controls, Faurecia envision interiors for autonomous driving. Jaguar enters performance crossover SUV segment.
2015-02-06
Magazine
Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.
2014-07-10
Magazine
Off-highway engines advance beyond Tier 4 With Tier 4 Final/Stage IV needs met, engine OEMs direct their focus and competitive energies toward optimizing competitive solutions. At the same time, they need to keep a weather eye out for future regulations, which many expect. Autonomous vehicle challenges span many fields Many of the challenges faced by military and commercial design teams are similar. Racket busters With a quiet cab at the top of many tractor buyers' wish lists, agricultural equipment manufacturers are pursuing every opportunity possible to shed decibels.
2014-03-04
Magazine
What's New at ConExpo/IFPE More new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8, are previewed. Gearshift actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies. Software makes solid impact Programs are helping hydraulic systems do more while reducing operator workloads. Damping out booming noise NVH improvement techniques are gaining traction with the goal to improve the quality perception of off-highway equipment performance and operator comfort.
2014-03-01
Magazine
The future for electric and hybrid vehicles in India Technical and political challenges alike have held back the electric and hybrid market, but there are signs of hope. Flex-fuel snowmobile challenge results in improved efficiency and lower emissions Noise and exhaust emissions of recreational snowmobiles have come under increased scrutiny by the U.S. federal government. Students from Kettering University take on the design challenges of meeting or exceeding such regulations. Actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies.
2013-10-04
Magazine
Exhausting Possibilities A novel herringbone design of exhaust catalyst could be the 'Eureka' moment for emissions reductions, says ACAT Global's CEO Joseph W Moch. Ian Adcock tries to unravel the story behind it A right royal performance An interior influenced by the Jubilee celebrations? James Brewer finds out more Virtually, the real deal OEMs want faster time to market, reduced development costs and ever more sophisticated testing. Ian Adcock reports
2013-09-17
Magazine
Seating solutions steer toward steel Zoomy-looking designs and alternative materials are eye-catching and save weight, but steel keeps getting lighter.
Viewing 1 to 30 of 263

Filter

  • Magazine
    263

Subtopics