Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 1 to 30 of 317
2017-07-07
Article
The 418th Flight Test Squadron at Edwards Air Force Base is currently assessing a new parachute for the Advanced Concept Ejection Seat II that will improve safety and expand the acceptable personal weight range of aircrew.
2017-07-02
Article
On June 28, 2017, days ahead of the July 2017 U.S. Air Force light attack aircraft experiment, the Senate Armed Services Committee passed a preliminary vote for a proposed annual defense budget that included $1.2 billion for “a fleet of Light Attack/Observation aircraft.”
2017-06-27
Article
Recently NASA researchers were officially cleared to begin formal feasibility studies on advanced Unmanned Aircraft System (UAS) concepts under NASA’s Convergent Aeronautics Solutions (CAS) project. The investigations, three in total, are expected to take between 24 and 30 months to complete.
2017-01-03
Article
NRL scientists have demonstrated metallic spin filtering at room temperature using ferromagnet-graphene-ferromagnet thin film junction devices.
2016-12-20
Article
Industrial aluminum slabs are typically produced by blending small amounts of copper or manganese in a reservoir of molten aluminum that is rapidly cooled, a process known as direct-chill casting. Variations in the way these elements solidify can yield uneven results that weaken the final product.
2016-10-20
Article
The fusing of emerging technologies from the aerospace materials sector and biological sciences are now, for the first time, heading toward the prospect of growing parts, systems, and, ultimately, perhaps whole aircraft.
2016-10-18
Article
Researchers from the U.S. Naval Research Laboratory's Optical Sciences Division and Material Science Division have detected acoustic emissions from cracks in riveted lap joints using a distributed feedback fiber laser-acoustic emission sensor.
2016-07-31
Article
Made of steel and aluminum, NASA's Airvolt test stand was designed and fabricated to help researchers anticipate system integration challenges and verify and validate electric propulsion components.
2016-07-15
Article
Mississippi State University's Car of the Future, a hybridized Subaru BRZ with advanced software and 3D-priinted innovations, gets an estimated triple-digit mpg while improving acceleration.
2016-05-31
Article
Stanford engineering professor David Lentink plans to use a new wind tunnel to learn the magic of bird flight and apply it to building better aerial robots.
2016-03-14
Article
As airlines strive to move more and more people faster and faster, the talk of a future supersonic aircraft for commercial purposes is getting louder and louder.
2016-01-30
Article
GKN believes that flight tests will prove 8% wing drag reduction in natural laminar flow wing concepts.
2016-01-29
Article
Electric propulsion is on the verge of causing the biggest changes in aviation since the advent of the jet engine.
2016-01-03
Article
Purdue University has developed a new system that allows a 3D printer to produce functioning products with enclosed electronic and motorized components and customized devices such as a computer mouse molded to a user's hand.
2015-11-09
Article
Design and build time of the UAV is said to be reduced 50%, and its is use of lightweight materials the enabler to reaching speeds over 150 mph.
2015-11-08
Article
AFRL is on the lookout for environmentally safer inorganic coatings solutions that will help protect and extend the life of aluminum landing gear.
2015-11-08
Article
The company continues to commit and breathe new life into its 40-year old fourth-generation fighter aircraft.
2015-11-08
Article
The PW1900G engine model for Embraer's E190-E2 recently flew on P&W's 747SP flying test bed at the company's Mirabel Flight Test Center in Quebec, with the engine family sited as a 'climate solution.'
2015-10-03
Article
Technologies considered necessary for unmanned aircraft systems (UAS) to safely avoid other aircraft while moving through airspace recently were put to the test using NASA's remotely piloted Ikhana aircraft.
2015-07-29
Article
SAKOR Technologies supplies a test system for the Dream Chaser atmospheric flight control system, serving as a spacecraft emulator to test overall system performance.
2015-07-23
Article
Physics-based robot simulation leveraging stochastic optimization and game theory will support new NASA missions.
2015-06-18
Article
Passenger Experience automates cabin completion processes with essential intelligent “building blocks” capturing rules, regulations, and manufacturing knowledge to automate cabin interior design, development, and delivery.
2015-06-12
Article
Small, electrically driven propellers spaced along wing leading-edges could benefit both small and medium-size aircraft
2015-06-09
Article
For the design process of the class of aircraft known as an efficient supersonic air vehicle, particular attention must be paid to the propulsion system design as a whole, including installation effects integrated into a vehicle performance model.
2015-04-29
Article
One of the key differentiators of the EP-8100 for commercial and military simulation and training is the system’s ability to use customers’ existing databases.
2015-04-24
Article
Boeing is in the midst of several months of flights with its ecoDemonstrator 757 in a first-round effort to evaluate new technologies in 2015 that are expected to reduce environmental effects on natural laminar flow as a way to improve aerodynamic efficiency while reducing noise and carbon emissions.
2015-04-24
Article
The engine bay is an essential component of the AgustaWestland AW609 tilt rotor nacelle, since it determines the performance of the engine and assures safe maneuvers for every flight condition.
2015-03-24
Article
In the area of electronics enclosures, traditional metal structures conduct and spread heat over large surfaces, but composites act as insulation. Heat generated by components causes internal temperatures to rise and has detrimental impact on the performance and reliability of the electronics.
2015-02-25
Article
Delcam’s 2015 version of its PowerINSPECT inspection system includes automatic collision avoidance, faster import of large CAD files, quicker preparation of longer inspection reports, and improved display of results from point-cloud data, plus many other customer-requested enhancements.
2015-02-19
Article
Conventional CT scanners cannot accommodate long or bulky aircraft components.
Viewing 1 to 30 of 317

Filter

  • Article
    317