Criteria

Text:
Content:
Display:

Results

Viewing 91 to 120 of 1053
2016-01-03
Article
Purdue University has developed a new system that allows a 3D printer to produce functioning products with enclosed electronic and motorized components and customized devices such as a computer mouse molded to a user's hand.
2015-12-22
Article
A new test service introduced by Bal Seal Engineering offers verified performance results for the company’s low-friction spring-energized seals used in rotary/face applications.
2015-12-22
Article
Messring, in cooperation with carbon fiber specialist Wolf Composite Solutions, has developed a new hybrid solution that enables testing of autonomous emergency braking (AEB) systems according to both U.S. and EU procedures.
2015-12-18
Article
Sx-STG from IPETRONIK is an eight-channel multi analog measuring module with sensor supply for various applications inside the vehicle cabin.
2015-12-18
Article
Kvaser has introduced the PCIEcan 4xHS, an integrated controller area network (CAN) card that adds four high-speed CAN channels to any standard computer board with PCI Express capability.
2015-11-25
Article
Claimed to be more package-efficient than conventional portable emissions measurement systems, the Firefly will hit the market as early as mid-2016.
2015-11-24
Article
DTS offers the ARS PRO high-performance angular rate sensor, which is designed for a range of applications including vehicle handling, crash, biomechanics, and even high-rate ballistics testing.
2015-11-19
Article
GM recently announced that its fuel-cell engineering team is working with the U.S. Army TARDEC to develop a prototype pickup truck with a commercial hydrogen fuel-cell powertrain that is capable of meeting U.S. military duty cycles. The vehicle will be put into daily use and driven by soldiers for 12 months.
2015-11-19
Article
It is possible to look at Audi’s new-generation aluminum/carbon fiber-constructed V10 R8 supercar in two ways: its entire technology comprises 50% of the latest R8 LMS (Le Mans Series) GT3 racecar; alternatively, the racecar comprises 50% of the road car. Oliver Jarvis, Audi’s motorsport team driver, provides insights to both cars.
2015-11-11
Article
Traffic fatalities have declined significantly over the last several years, but the U.S. is on track to have its deadliest year since 2007, according to the National Safety Council. That’s shining the spotlight on crash testing, according to industry experts in a Technical Webinar Series from the Editors of SAE.
2015-11-11
Article
The new $30 million facility at the Warren Technical Center uses a belt-type moving ground plane to simulate full driving conditions on clay models up to an indicated 155 mph (250 km/h).
2015-11-09
Article
Design and build time of the UAV is said to be reduced 50%, and its is use of lightweight materials the enabler to reaching speeds over 150 mph.
2015-11-08
Article
AFRL is on the lookout for environmentally safer inorganic coatings solutions that will help protect and extend the life of aluminum landing gear.
2015-11-08
Article
The company continues to commit and breathe new life into its 40-year old fourth-generation fighter aircraft.
2015-11-08
Article
The PW1900G engine model for Embraer's E190-E2 recently flew on P&W's 747SP flying test bed at the company's Mirabel Flight Test Center in Quebec, with the engine family sited as a 'climate solution.'
2015-11-02
Article
Additional in-house testing capabilities and the hiring of 180 engineers and technicians underscores an ambitious strategy to reach $15B in annual sales by 2020.
2015-10-28
Article
Skogforsk (the Forestry Research Institute of Sweden) has funded a KTH research initiative intended to help improve the suspension of forestry machines with the goal of achieving significant productivity improvements. KTH’s mission is to streamline the design process by validating the capability to simulate the operation of forestry machines under real-world operating conditions.
2015-10-26
Article
Just as engineers of consumer vehicles are being asked to shorten development cycles and improve performance, reliability, and safety, so are developers of off-highway vehicles, such as construction equipment and agricultural machinery.
2015-10-03
Article
Technologies considered necessary for unmanned aircraft systems (UAS) to safely avoid other aircraft while moving through airspace recently were put to the test using NASA's remotely piloted Ikhana aircraft.
2015-09-21
Article
Principal Engineer considers acoustic holography as the next step in the further development of its new noise measurement system.
2015-09-11
Article
Endurica targets tire and rubber product developers with new software release. CAE software adds features for the analysis of rolling structures, self-heating, wrinkling, and cavitation.
2015-08-26
Article
TECAT has developed a system to measure torque on a flexplate accurately and in-situ.
2015-08-26
Article
Helium leak detection systems are helping transmission suppliers improve quality and reduce the cost of producing new automatic transmissions.
2015-08-24
Article
Even as simulation and virtual design tools get ever more sophisticated, brick-and-mortar test facilities are as important as ever.
2015-08-24
Article
DTS' TSR data logger line includes a ±20 g sensor range.
2015-08-19
Article
The 2017 GT development program has begun testing in southeastern Michigan, with the exotic American supercars running “naked” as they rack up miles amid daily commuter traffic. Automotive Engineering encountered and photographed one of the off-tool prototypes recently.
2015-08-11
Article
A $2.5 million upgrade turns an existing climatic cell into one of the industry's most capable facilities for 4x4 and AWD vehicle development.
2015-08-10
Article
Tucked within the University of Michigan's Ann Arbor campus is a glimpse of the automotive future. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at Mcity, a new proving ground that will help automakers and suppliers develop automated and driverless car technologies.
2015-07-29
Article
SAKOR Technologies supplies a test system for the Dream Chaser atmospheric flight control system, serving as a spacecraft emulator to test overall system performance.
2015-07-28
Article
The 6DX PRO for gathering kinematic data for research and engineering validation was designed by DTS specifically for occupant dynamics and human injury assessment.
Viewing 91 to 120 of 1053

Filter

  • Article
    1053