Criteria

Text:
Content:
Display:

Results

Viewing 271 to 300 of 1053
2013-11-24
Article
Researchers devised the tests to prove that active flow control can enhance the performance of a vertical tail enough to allow future designers to reduce the size of the structure for a whole family of airplanes.
2013-11-22
Article
Now that simulation and modeling are common techniques for designing equipment, standards groups are stepping in to add a bit more structure and compatibility for these tools. Two trade associations have paired up to establish a working group that aims to make it simpler to merge engineering analysis with overall systems behavior analysis.
2013-11-13
Article
A forum at the 2013 SEMA Show discussed three approaches to ensure performance parts compliance with federal safety standard No. 126. Panelists also explained how simulation data, and kinematics and compliance measurements, can improve performance parts design.
2013-11-12
Article
MESSRING offers the new M=BUS in-dummy data acquisition system for the WorldSID (Worldwide Harmonized Side Impact Dummy) 5th Small Female Dummy.
2013-10-31
Article
New R-1234yf production is promised by Arkema. SAE Cooperative Research Group shows R-445A blend has potential, and vehicle prototype charging equipment for assembly line and service shop is undergoing testing. German automakers resurrect the R-744 (carbon dioxide as a refrigerant) development program.
2013-10-31
Article
Combustion simulation has the potential to help engine manufacturers design better engines in less time with less cost.
2013-10-30
Article
In an attempt to achieve a balance between Reynolds number, model scale, and tunnel blockage issues, a 1:3 scale heavy-vehicle testing program has been initiated at the Monash University 1.4-MW wind tunnel.
2013-10-30
Article
Ashok Leyland, the Hinduja Group flagship, has sold Defiance Testing & Engineering Services (DTE) to Exova, a provider of testing, calibration, and advisory services. Located near Detroit, DTE was acquired by Ashok Leyland in 2007 and since has experienced consistent and profitable growth, according to the Indian OEM, through a combination of operational efficiency, new customer capture, and focus on adjacent sectors such as construction and off-highway, and defense.
2013-10-24
Article
Durex Industries’ Chiller Technology-based aluminum nitride (AlN) ceramic heater with an embedded tungsten RTD (resistance temperature detector) sensor can heat from 100° to 450°C at 200°C/s, as well as cool from 450° to 100°C at 100°C/s.
2013-10-24
Article
Mars Labs, LLC’s Titan modular DAQ system, available in both standard and custom models, can be used for durability and fatigue, noise and vibration, shock, compression, and acoustics measurements.
2013-10-21
Article
Next-generation unmanned air systems will require more performance and must integrate increasing capabilities for guidance control, weaponry, and surveillance—all in a very limited space.
2013-10-10
Article
Ford is helping to make its vision of driverless parallel parking and pedestrian avoidance realities. The automaker demonstrated the two technologies to journalists earlier this week at its proving grounds in Lommel, Belgium.
2013-10-04
Article
NH Research Inc. offers a 40-V model as a part of its 9200 family of high-power battery charge/discharge test systems.
2013-10-01
Article
Expanding on a demonstration project in Hawaii, General Motors Co. and the U.S. Army Tank Automotive Research, Development & Engineering Center (TARDEC) will again collaborate on fuel-cell technology under a new cooperative research and development agreement.
2013-10-01
Article
Meritor offers two lightweight electronic systems that allow drivers to control tire pressure, differential locking, and transfer case positioning to improve military vehicle performance and traction in various terrains and extreme conditions.
2013-10-01
Article
Maplesoft adds the MapleSim hydraulics library to its product family through a technology partnership with Modelon.
2013-10-01
Article
Meggitt Sensing Systems’ Endevco model 7253D triaxial Isotron accelerometer is designed for applications requiring the measurement of shock and vibration simultaneously in three mutually perpendicular axes.
2013-09-23
Article
Southwest Research Institute says it has deployed the first electric-vehicle aggregation system using SAE International’s J1772 standard for dc fast charging. The system, part of the Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) Phase II program, is controlling five fast-charge stations at the Fort Carson Army Base in Colorado Springs, CO.
2013-09-18
Article
Rising system complexity and shortened development cycles have led to the need for an extension of the existing, classical test methods. The Airbus High Lift Test Department is pursuing virtual testing as an additional, equivalent test means besides existing, established physical means of compliance.
2013-09-17
Article
Napoleon Engineering Services (NES) announces a custom test rig design and manufacturing service for OEMs to perform rigorous bearing testing in-house.
2013-09-13
Article
The U.S. Department of Energy recently opened what it describes as a "one-of-a-kind national secure data center" at its National Renewable Energy Laboratory (NREL) in Golden, CO. The National Fuel Cell Technology Evaluation Center (NFCTEC) allows industry, academia, and government organizations to submit and review data gathered from projects to advance cost-effective fuel-cell technology.
2013-09-09
Article
Danlaw Inc. offers its Mx-Suite embedded software test product with seamless connectivity to National Instruments’ NI VeriStand, the environment for configuring real-time testing applications.
2013-09-04
Article
The Trimble TirePulse tire monitoring system was designed to reduce maintenance costs, increase overall fleet productivity, and promote site safety.
2013-08-19
Article
Vibration-induced shaking of a part wastes energy, increases noise, boosts stresses on associated components, and accelerates bearing wear. Eventually, vibration can degrade an entire machine and significantly raise maintenance and replacement costs.
2013-08-16
Article
Sonoscan’s Digital Image Analysis Toolbox is used for automated acoustic analysis of individual IC components, various types of bonded wafers including MEMS, and other devices.
2013-08-14
Article
MTS Systems Corp., a supplier of test systems and position sensors, finalized an agreement with Shanghai Jiaotong University (SJTU) to establish an Aerospace Structural Strength Testing Demo Site at SJTU in Shanghai.
2013-08-05
Article
Donaldson Company, Inc., a worldwide manufacturer of air and liquid filtration systems and replacement parts for engines, is expanding test laboratories at its Bloomington, MN, corporate headquarters. 
2013-07-31
Article
Verisurf’s seventh generation of its Verisurf X computer-aided inspection, reverse engineering, and assembly guidance software has model-based GD&T inspection technology at its core, and it supports more options for reporting and presenting data, including Microsoft Word, PowerPoint, and Adobe 3-D PDF Viewer.
2013-07-31
Article
The digital linear-ball-bearing gauging probe system from Measurement Specialties accurately measures manufactured parts during production for automated inspection screening and statistical process control data collection.
2013-07-29
Article
Stauff’s PPC-04-plus latest generation handheld hydraulic testers feature robust construction for use in harsh conditions.
Viewing 271 to 300 of 1053

Filter

  • Article
    1053