Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 133
2017-11-15
WIP Standard
J467B
The data given in Tables 1-4 are typical values only and are not intended for design parameters. Mechanical properties of the special purpose alloys depend greatly upon processing variables and heat treatment. It is recommended that design data be obtained by actual testing or by consultation with the producers of the alloys.
2017-11-15
WIP Standard
J470
This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called 'superalloys,' or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.
2017-11-13
WIP Standard
AS1895/7F
SCOPE IS UNAVAILABLE.
CURRENT
2017-11-09
Standard
AMS5442B
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 5.0 inches (127mm) in least nominal cross-sectional dimension having a cross-sectional area not greater than 50 in2 (323 cm2), and stock of any size for forging or flash welded rings (see 8.5).
CURRENT
2017-11-09
Standard
AMS5596M
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, foil, and plate 1.00 inch (25.4 mm) and under in thickness (see 8.5).
2017-11-08
WIP Standard
AS7471H
This procurement specification covers bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07001. The following specification designations and their properties are covered:
AS7471 165 ksi minimum ultimate tensile strength at room temperature. 75 ksi stress-rupture strength at 1350 °F.
AS7471-1 165 ksi minimum ultimate tensile strength at room temperature. 99 ksi minimum ultimate shear strength at room temperature.

CURRENT
2017-10-18
Standard
AS4877G
This procurement specification covers bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.
CURRENT
2017-10-04
Standard
AMS03_9A
This SAE Standard specifies the requirements for the electro-deposition of silver on ferrous-base, copper-base, aluminum-base, zinc-base and nickel base materials. It is primarily intended for use on electrical and electronic items which are to be plated with silver to increase the electrical conductivity of the surface.
2017-10-03
WIP Standard
AMS4779K
This specification covers a nickel alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.
CURRENT
2017-08-10
Standard
AMS5540P
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 2 inches (50.8 mm), inclusive, in nominal thickness (see 8.4).
CURRENT
2017-07-26
Standard
AS123301D
CURRENT
2017-07-20
Standard
AMS5951A
This specification covers a corrosion and heat-resistant nickel based alloy in the form of sheet, strip, and plate 0.020 to 1.0 inch (0.508 to 25.4 mm) in thickness (see 8.5).
CURRENT
2017-06-29
Standard
AMS7875F
This specification covers a blend of chromium carbide and a nickel-chromium alloy in the form of powder.
CURRENT
2017-06-13
Standard
AMS5707N
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, 3.25 inches (82.6 mm) and under and stock of any size for forging and for flash welded rings. (see 8.5).
CURRENT
2017-06-05
Standard
AMS5802E
This specification covers a corrosion and heat-resistant iron-nickel alloy in the form of welding wire.
CURRENT
2017-05-22
Standard
AMS4302C
This specification covers an aluminum alloy in the form of sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg.
CURRENT
2017-05-01
Standard
AS44725AR-2
No Scope available.
CURRENT
2017-04-30
Standard
TS220AR-2
No Scope available.
CURRENT
2017-04-27
Standard
AS1895/7E
Viewing 1 to 30 of 133

Filter

  • Standard
    133