Criteria

Text:
Topic:
Sector:
Display:

Results

Viewing 1 to 17 of 17
2015-09-21 ...
  • September 21, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 AeroTech Congress & Exhibition at this special rate.
2015-09-17 ...
  • September 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The transportation industry, including motor vehicles, aircraft, rail, marine, commercial, off-road and defense vehicles, as well as infrastructures, energy sectors, raw materials, manufacturing, health and food industries all experience significant issues with corrosion which results in billions of dollars of loss each year. Corrosion education and prevention is essential to improve and increase the service life of parts and components which may have a significant impact on the economy of various industries and nations.
2015-08-05 ...
  • August 5-7, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 16-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
There is a potential for metal fatigue in any situation where a component is subjected to cyclic loads. Fatigue failures of various types are a key concern in increasing the reliability of products. Problems involving fatigue have become more severe with the demand for lighter weight structures and components. The effective use of fatigue analysis and predictive tools is critical for reducing the development time of new products. Two methods of metal fatigue analysis will be covered. The first is the stress-life approach. This method is used for high cycle or very long life fatigue problems where loads have fairly constant amplitude.
2015-06-25 ...
  • June 25-26, 2015 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
***Please note: The Thursday, June 25, 2015 seminar class time is 10:30am - 6:00pm. The June offering of this seminar is held in conjunction with the SAE 2015 Noise and Vibration Conference and Exhibition. Register for this offering and you can register to attend the Noise and Vibration Conference and Exhibition for 25% off the classic member event rate. Please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for SAE 2015 Noise and Vibration Conference and Exhibition for this special rate.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches why and how galvanic corrosion occurs and methods for controlling galvanic corrosion. The course content can be completed in one hour.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about uniform corrosion of metals. Participants will learn why and how uniform corrosion occurs and methods for controlling it. References of textbooks and handbooks for more information are also provided. The course content can be completed in one hour.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course discusses common steel case hardening processes and how they are used to modify the surface layers of steels to obtain specific mechanical properties. Participants will learn about the process parameters and how they affect case composition, depth, microstructure, and properties. The course takes one hour to complete.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about the metallurgy of the following steel through hardening processes: quench and temper, martempering, and austempering. Participants will learn about the effects of heat treating temperature and cooling rate on steel microstructure and properties, and the effects of the interaction between heat treating process parameters and steel composition on through hardened steel microstructure and strength. This course takes one hour to complete.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches the phases and microstructures that form in steels, their effects on steel properties, the microstructure changes that occur when steel is heated and cooled, the effects of carbon content and cooling rate on the microstructures that form. Also, how to read the iron-carbon phase diagram will be discussed. All this information is applicable to understanding the effects of steel heat treating processes and heat treating process parameters on the microstructure and properties of heat treated plain carbon, low-alloy, and tools steels. The course is divided into six modules followed by a quiz.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about the microscopic changes that take place in a precipitation strengthened alloy and their effects on the properties of the alloy. The effects of the different heat treating steps (solution treatment, quench, and aging) and heat treating process parameters (solution treatment temperature and time, quench rate, and aging temperature and time) on the alloy microstructure and the effects on alloy strength are discussed. The course is divided into five modules followed by a quiz.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course covers the fundamental mechanisms involved in the aqueous (water based chemicals) corrosion of metals. The factors that influence the inherent corrosion behavior of a metal and the factors that influence metal corrosion rate will be discussed. The course takes one hour to complete.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about corrosion of metals. The physics of corrosion is explored as a background for the discussion of seven common types of corrosion (uniform, galvanic, crevice, pitting, intergranular, stress corrosion cracking, and dealloying). Students will learn why and how corrosion occurs and methods for controlling corrosion. It includes eleven modules followed by a quiz.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course focuses on Rockwell and Brinell hardness testing and Vickers and Knoop microhardness testing. Participants will learn about how the tests are performed, test sample requirements, test parameter selection, and testing requirements. The course can be completed in 30 minutes.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches the basic microscopic structures present inside of metals, how these structures and metal composition influence metal strength, and how these structures can be modified using common manufacturing processes to obtain specific mechanical properties. Several examples are presented to demonstrate how common alloying and manufacturing methods are used to modify the microscopic structures and properties of metals. It includes twelve modules that are five to 25 minutes in length, followed by a quiz.
Training / Education Classroom Seminars
The simultaneous demands for reliability and minimum weight for aircraft and propulsion systems offer some of the most challenging technical problems that structural and safety engineers can encounter. Although much information is available on fracture mechanics and aircraft damage tolerance, this course specifically relates to damage tolerance for gas turbine engines. The need to consider damage tolerance more broadly in new engine designs has just recently been written into FAR 33.70 and new EASA guidelines.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about common heat treating processes and how they are used to modify the microstructure of steels to obtain specific mechanical properties. You will learn about the metallurgy of steel, the effects of heat treating temperature and cooling rate on microstructure properties, and the effects of the interaction between heat treating process parameters and steel composition on steel microstructure and strength. It includes eleven modules followed by a quiz.
Anytime
Training / Education On Demand Metallurgy Online Course
This online course teaches about tensile testing of metals with a focus on how the testing is performed and tensile properties are measured. It includes one module followed by a quiz.
Viewing 1 to 17 of 17