Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 20251 to 20280 of 20713
HISTORICAL
1944-05-01
Standard
AMS5040C
This specification covers a carbon steel in the form of sheet and strip.
HISTORICAL
1944-05-01
Standard
AMS6260A
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
HISTORICAL
1944-05-01
Standard
AMS4870
This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings.
HISTORICAL
1944-05-01
Standard
AMS4150
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing, flash welded rings fabricated from extruded stock, and stock for flash welded rings. These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding during fabrication, but usage is not limited to such applications.
CURRENT
1944-04-01
Standard
AMS6353
No scope available.
HISTORICAL
1944-03-01
Standard
AMS4815A
This specification covers bearings of low-carbon steel plated on one or both faces with silver.
HISTORICAL
1944-03-01
Standard
AMS3552
HISTORICAL
1944-03-01
Standard
AMS3802
This specification covers one strength and one weave of mercerized cotton known as "airplane cloth."
HISTORICAL
1944-03-01
Standard
AMS7220A
HISTORICAL
1944-03-01
Standard
AMS7222A
HISTORICAL
1944-03-01
Standard
AMS5690B
This specification covers a corrosion and heat resistant steel in the form of wire. This wire has been used typically in woven wire screening, but usage is not limited to such application. The former requirements of this specification for use as welding wire are embodied in AMS 5692. When AMS 5690 is specified for welding wire, use AMS 5692.
HISTORICAL
1944-03-01
Standard
AMS3221A
HISTORICAL
1944-03-01
Standard
AMS4610B
This specification covers one type of copper alloy (brass) in the form of bars and rods. These products have been used typically for automatic high-speed screw machine parts where free-cutting characteristics are desirable, but usage is not limited to such applications.
HISTORICAL
1944-03-01
Standard
AMS3564
This specification covers vulcanized fiber in the form of sheet. This sheet has been used typically for gaskets and reinforcements on packaging enclosures, but usage is not limited to such applications.
HISTORICAL
1944-03-01
Standard
AMS3222A
This specification covers a synthetic rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
HISTORICAL
1944-03-01
Standard
AMS4080B
This specification covers an aluminum alloy in the form of drawn seamless tubing. This tubing has been used typically for parts, such as conduits and low-pressure fluid lines, where moderate strength, ductility, and good weldability are required, but usage is not limited to such applications.
HISTORICAL
1944-03-01
Standard
AMS4070B
This specification covers an aluminum alloy in the form of drawn, round seamless tubing. This tubing has been used typically for parts, such as brackets, conduits, and low-pressure fluid lines, requiring good weldability, moderate strength, and good resistance to corrosion, but usage is not limited to such applications.
HISTORICAL
1944-03-01
Standard
AMS5610B
This specification covers two types of free-machining, corrosion and moderate heat resistant steel in the form of bars, wire, forgings, and forging stock.
CURRENT
1943-12-01
Standard
AMS6252C
No scope available.
HISTORICAL
1943-10-01
Standard
AMS6357A
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
HISTORICAL
1943-10-01
Standard
AMS6535A
Primarily for use where welding and moderate tensile properties are required. May be used where minimum tensile strength up to 180,000 psi (1240 MPa) is required for wall thicknesses up to 0.125 in. (3 mm) and proportionately lower strength is required in heavier thicknesses. This specification has been declared "Noncurrent" by the Aerospace Materials Division, SAE, as of 19 April 1988. It is recommended, therefore, that this specification not be specified for new designs.
HISTORICAL
1943-10-01
Standard
AMS6530A
This specification has been declared "SUPERSEDED" by the Aerospace Materials Division, SAE, as of February 1995. The requirements of this specification are embodied in the laths issue of AMS 6360.
HISTORICAL
1943-10-01
Standard
AMS6550A
Primarily for general use is light wall-thickness sections where minimum tensile strength up to 160,000 psi (1105 MPa) is required and parts may be welded during fabrication. This specification has been declared "Noncurrent" by the Aerospace Materials Division, SAE, as of April 19, 1988. It is recommended, therefore, that this specification not be specified for new designs.
HISTORICAL
1943-10-01
Standard
AMS4855
This specification covers a leaded red brass alloy in the form of sand and centrifugal castings. These castings have been used typically for parts, such as fittings in fluid conducting lines, where soundness of castings is of prime importance, but usage is not limited to such applications.
HISTORICAL
1943-10-01
Standard
AMS5032
This specification covers a low-carbon steel in the form of wire supplied as coils of wire or, when specified, as straight lengths.
Viewing 20251 to 20280 of 20713