Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 1242
2017-03-02
Magazine
Thought leadership at WCX17 Lucid Motors’ David Moseley: EV or ICE, “It is all physics” New eye on the road One of the industry’s hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye’s co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France’s MCE-5.
2017-02-03
Magazine
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-12-01
Magazine
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-11-01
Magazine
The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-08-16
Magazine
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-06-01
Magazine
Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2016-02-16
Magazine
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-02-03
Magazine
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive new gasoline and light-duty diesel ICEs. Citizen of the world Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about auto-mobility and aero-mobility 2050. CES rollouts extend connectivity, app integration Ford looks to spread Corning's new lightweight Gorilla Glass beyond the 2017 GT New 40%-scale wind tunnel increases GM's aero-development capacity Surface Generation speeds composites throughput with one-shot stamp-forming process 2017 Cadillac XT5 debuts GM's new lightweight crossover architecture Porsche and Bentley plan electric future
2016-01-06
Magazine
Time to get personal Industry engineers are combining apps, voice, the cloud, and other technologies such as artificial intelligence to enable drivers to customize their vehicles and anticipate their needs. Technology report GM and TARDEC co-developing fuel cell powered Chevrolet Colorado for military evaluation vehicles and anticipate their needs. Global vehicles Sports cars take center stage in Tokyo
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-12-01
Magazine
Touch and go Avionics developments are changing life in the cockpit and at airborne work stations Sandwich cores for the future Decreasing weight while increasing strength is always critical, from airliners to future space missions to Mars. Research in sandwich cores today may lead to radical improvements in the future.
2015-11-03
Magazine
Active in aero Several automakers-notably Mercedes-Benz and Audi - used the Frankfurt Motor Show stage to reveal sleek vehicles that aggressively employ active aerodynamic elements and other advances to reduce drag. Composites permeate inside and out Composite materials are gaining popularity for both unseen structural components and for exterior eye candy. Powertrain testing: coping with complexity With increasing use of electrical components to extend the performance of conventional combustion engines, powertrain development has never been more complicated. The good news is that test and development engineers are harnessing advanced simulation techniques and computer processing to develop the most efficient and fun powertrains ever. Can ads help in vehicle-to-vehicle rollout? Porsche unveils new downsized, boosted 3.0-L boxer six. Johnson Controls, Faurecia envision interiors for autonomous driving. Jaguar enters performance crossover SUV segment.
2015-10-07
Magazine
Tearing down the global barriers Steering systems are becoming increasingly sophisticated, as Ian Adcock discovers when talking to the men leading Nexteer's European expansion €1.1 billion worth of Bentley luxury Bentley's Bentayga is the first in a new generation of luxury cross-overs. Ian Adcock reveals its engineering secrets Goal: "virtual" perfection Should simulations be 100% accurate?
2015-10-06
Magazine
2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.
2015-09-01
Magazine
Driving EVs toward lower cost The race is on to reduce battery and electric-drive systems costs while improving efficiency. Seeking ways to make better computer crashes New models and simulations help improve safety as software and hardware provide more realism to iterate designs more quickly. Evaluating aluminum bonds Adhesively joined aluminum alloy sheets present challenges that steel-adhesive joints do not. Ford researchers present a modified technique to inspect Al-adhesive joints in lab and production environments. Leading the attack on engine pumping losses Cylinder deactivation delivers real-world fuel economy gains, helping vehicles to meet and exceed their sticker numbers. That's why the downsized/boosted guys now want it on their engines.
2015-08-18
Magazine
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-06-02
Magazine
Balancing GDI fuel economy and emissions Will OEMs have to adopt gasoline particulate filters to comply with stringent new emissions regulations? Top engineers discuss current developments. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Mixing metals Cadillac pursues aluminum/steel mix for new CT6 luxury sedan, leading to advances in body assembly.
2015-06-01
Magazine
Regional and bizjets refined and redefined As the regional and business jet markets steadily rebound, so too do the propulsion technologies that will provide airframers and their customers competitive advantage. Getting it right with composites With composites now a mainstay in most new aircraft designs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-04-07
Magazine
GM's CTO driving new paths to technology leadership 'We're making actual production commitments regarding our advanced-technology strategy, rather than just talking about it,' says GM's CTO Jon Lauckner. 'We're absolutely going to be among the leaders, if not the leader, in these areas.' Aluminum prepares for its next big leap Ford's F-Series blockbuster was just the beginning. New micromills now in pilot phase aim to bring vastly stronger and more formable light-alloy materials at higher capacity, says Alcoa's Mike Murphy. Slick solutions for friction reduction From new lubricants to 'smart' oil pumps and clever bearing technologies, engine designers are attacking every potential source of spin losses and internal friction in the quest for more mechanical work out of less fuel. Next-gen NSX: a twin-turbo, multi-material Ferrari-fighter The production NSX made its much-awaited global debut at NAIAS in January.
Viewing 1 to 30 of 1242