Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 241 to 270 of 1010
2014-04-08
Article
The Bluestop coating process from Nelson offers protection for chrome-plated exhaust components against chrome discoloration.
2014-04-08
Article
Honeywell introduces Solstice performance fluid with improved cleaning power for metal and plastic parts.
2014-04-07
Article
Adchem offers 488M Red 8-mm (0.31-in) high caliper acrylic adhesive double-sided tape.
2014-04-07
Article
Custom diaphragms molded of co-polyester thermoplastic elastomer (TPE) from Minnesota Rubber and Plastics improve tensile strength while preventing the threat of pin-hole seal leaks.
2014-04-06
Article
According the Celanese's Jeffrey Helms, engineered material innovations are helping OEMs and their suppliers develop the vehicles of tomorrow with components that not only reduce weight, but also deliver cost savings and help reduce emissions and waste.
2014-04-02
Article
The new book "Glass Engineering: Design Solutions for Automotive Applications" from SAE International uses a no-nonsense, step-by-step approach to examine the variables of automotive glass engineering.
2014-04-01
Article
Freudenberg-NOK believes that the ability of a company to be innovative in all aspects of the design cycle—from material research and product engineering to final manufacturing and build—is a key element to the overall success of suppliers and OEMs alike.
2014-03-24
Article
A sophomore nabbed the top spot in a steel wheels competition focused on eye-appealing, lightweight-structure concept renderings from Lawrence Technological University design students. The 2014 competition required student designers to use the engineering results from the Steel Market Development Institute’s Lightweight Steel Wheel Project.
2014-03-24
Article
The technology organization has developed an innovative process to help reduce the cost of composite component use. Features normally added in a separate operation, such as clips and inserts for threaded fasteners, can now be molded directly onto the back of high-quality composite panels, producing a more cost-effective part than a conventional bonded assembly.
2014-03-14
Article
To assist the automotive industry in its quest to develop ever more fuel-efficient technologies, Sandvik Materials Technology is launching two grades of seamless stainless tubing—Pressurfect and Pressurfect XP—to handle higher fuel pressures in gasoline direct injection (GDI) engines.
2014-03-14
Article
SAE International has published a new book titled "Plastics Application Technology for Safe and Lightweight Automobiles."
2014-03-13
Article
Out of the nearly 1500 technical papers being presented this year at the SAE 2014 World Congress & Exhibition, about 200 of them will focus on materials, and from a wide range of angles. In all, there will be 38 technical sessions with an emphasis on materials.
2014-03-10
Article
Shown at the 2014 Geneva Motor Show, the concept uses a new construction method that brings together lightweight steels, a lightweight carbon fiber reinforced plastic structure, and power from a hydrogen fuel cell.
2014-03-10
Article
The continued use of composite materials in aerospace has revealed other challenges that need to be addressed while the solutions to material and manufacturing cost are reduced. Before the widespread use of the material in transportation vehicles can be realized, safety challenges surrounding the material must be addressed.
2014-03-10
Article
Stinger polypropylene rigid honeycomb-cored structural sheet from Coroplast will be displayed at SAE 2014 World Congress April 8-10 in Detroit.
2014-03-10
Article
FINEMET by Hitachi Metals is claimed to be the first nanocrystalline soft magnetic material to be developed.
2014-03-07
Article
Most rapid prototype parts are brittle or turn limp in warm water, and can only take engineers so far during development. Synergeering Group has developed a way for rapid prototype parts to be functional—on a running engine.
2014-03-07
Article
Potential lithium-ion battery electrolyte replacement being researched at the University of North Carolina-Chapel Hill is non-flammable.
2014-03-07
Article
Donaldson’s Automotive Venting Solutions, which offer a variety of materials and configurations to meet the needs of automotive system suppliers, will be displayed at the SAE 2014 World Congress April 8-10 in Detroit.
2014-03-05
Article
Stamped aluminum is shown to offer advantages in weight and cost over die-casting.
2014-02-26
Article
President Barack Obama on Feb. 25 announced that the creation of two “manufacturing innovation hubs” in which the public and private sectors will work together to “bridge the gap between applied research and product development by bringing together companies, universities, and other academic and training institutions.”
2014-02-26
Article
Technical sessions focused on interiors at the SAE 2014 World Congress span the designated technology areas, including electronics, materials, and safety/testing. One example in the electronics area, to take place April 8 at 9:30 a.m., covers multi-media systems. As part of the discussion, Takata researchers will present new touchscreen concepts such as a smart display surface that could benefit steering-wheel design.
2014-02-24
Article
Constellium N.V. and UACJ Corp. recently announced their intention to form a joint venture for production of aluminum automotive sheet for body-in-white (BIW) applications. The companies plan to invest $150 million in a new plant that will include a continuous heat treatment and conversion line with an initial target capacity of 100,000 t (110,000 ton) supplied by cold-rolled coils from both partners’ rolling mills.
2014-02-24
Article
Boeing has selected its Everett, WA, site as the location for a new composite wing center for the 777X program. Boeing evaluated criteria that were designed to find the wing fabrication location that would best support the 777X business plan.
2014-02-18
Article
Sandvik 3R60, the manufacturer’s next-generation 316L grade straight length and coiled hydraulic and instrumentation tubing, will be launched to North American customers at this year’s IFPE 2014 in Las Vegas. An austenitic chromium-nickel steel, Sandvik 3R60 offers higher strength, better weldability, and improved corrosion resistance.
2014-02-18
Article
Grede is developing lightweight chassis, powertrain, and drivetrain components—including safety-critical systems—for several heavy-equipment manufacturers using a patented ductile iron alloy called SiboDur.
2014-02-14
Article
Hamilton Standard custom engineered an all-stainless inline caster for a major aerospace supplier.
2014-02-14
Article
The LUVOCOM 8000 series of PEEK wear compounds from Lehvoss North America incorporates proprietary additives that further elevate the wear resistance of PEEK compounds.
2014-02-14
Article
The ANKOR Hydraulics hard chrome process from Enthone delivers corrosion resistance while offering a more sustainable alternative to other high-efficiency, etch-free hard chrome processes for hydraulics/fluid power applications.
2014-02-14
Article
Multi-material vehicles are becoming more prevalent as automakers attempt to reduce vehicle weight and boost fuel efficiency. Selecting the proper adhesive is critical when bonding dissimilar materials.
Viewing 241 to 270 of 1010

Filter

  • Article
    1010