Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 91 to 120 of 1020
2016-02-04
Article
A University of Delaware research team is developing technologies aimed at ending the reign of high-cost platinum fuel cell stacks.
2016-02-03
Article
Stanyl PA46 from DSM has been chosen for low-friction slide shoes within the timing system of turbocharged gasoline engines.
2016-02-02
Article
High-performance optical liquid silicone rubber from Proto Labs is a transparent, flexible material that can replace glass in many optical applications.
2016-01-25
Article
Researchers at a U.K. university have revealed a "smart" glazing solution that uses nanotechnology to achieve self-cleaning, energy saving, and anti-glare properties.
2016-01-22
Article
UV light solidifies photo-curable resins into complex shapes that are then fired to produce strong, fully dense ceramics.
2016-01-06
Article
The $1 billion venture, funded for five years, will focus on autonomous vehicle technologies, artificial intelligence, materials science, robotics, and more.
2016-01-05
Article
Corning's new glazing material delivers more than five times the strength, pound for pound, of conventional auto glass while offering significant mass reduction and improved optics.
2016-01-03
Article
Magnesium infused with dense silicon carbide nanoparticles anticipated to see much use in airplanes and spacecraft.
2016-01-01
Article
GE’s proprietary scatter|correct technology enhances defect detection and analysis as well as 3D metrology in mobility sectors including aerospace, automotive, and off-highway. It can be applied to high scattering materials such as steel and aluminum, composites, and multi-material samples.
2015-12-28
Article
Next-generation power semiconductors could achieve price parity with silicon in five years, helping to lower the cost of plug-in hybrids and batter-electric vehicles.
2015-12-22
Article
A new test service introduced by Bal Seal Engineering offers verified performance results for the company’s low-friction spring-energized seals used in rotary/face applications.
2015-12-22
Article
Henkel Adhesive Technologies has formulated Gap Filler 3500LV to deliver high thermal conductivity of 3.5 W/m-K and the mechanical property benefits of a silicone, but with low volatility for reduced outgassing.
2015-12-22
Article
Nominations for the fourth annual Altair Enlighten Award are now being accepted, with the 2016 award program including two distinct categories recognizing vehicle lightweighting: full vehicles and modules.
2015-12-04
Article
A lightweight composite material shaped by a unique assembly technique forms a grille opening reinforcement designed specifically for the high-performance 2016 Ford Shelby GT350 Mustang.
2015-12-03
Article
The U.K.-based supplier is working with research group WMG and AGC AeroComposites to develop new composite press-forming processes for automotive and aerospace manufacturers. Patented technology makes it possible to achieve one-minute Takt times for thermoplastic components.
2015-12-01
Article
The 2016 Honda Civic features selectively-tempered “soft zone” technology in the B-pillars and rear frame rails, allowing zones within a single frame piece to have more ductile properties than the surrounding ultra-high-strength hot-stamped steel. The technology minimizes parts count and saves 15.6 lb (7 kg) compared to the previous-generation Civic.
2015-11-06
Article
Lightweighting and design customization are focus areas for SABIC's new material solutions for aircraft cabins.
2015-11-02
Article
In collaboration with General Motors, ContiTech developed the fiberglass-reinforced polyamide strut mount for the new 2016 Cadillac CT6, reducing weight by 25% compared to an aluminum design.
2015-10-26
Article
The German equipment supplier’s new PCHflex technology reportedly allows economical production of hot-stamped parts with high output performance, part quality, and maximum availability. A U.S. car manufacturer has already placed an order with Schuler for four production lines to manufacture lightweight parts using PCHflex, which is also suitable for producing parts on heavy-duty vehicles.
2015-10-23
Article
There's a revolution going on within the bones of new cars and trucks—new body structures that are much lighter and stronger for better fuel economy, safety, and handling. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at the heroes of the revolution: aluminum die castings. 
2015-10-16
Article
Interface Performance Materials has introduced two new thermal shields in the Select-a-Shield thermal product family—THH-1010 and TFP-3065—the first innovations in a series scheduled to be released through 2016.
2015-10-12
Article
Recognizing the power of technologies such as energy storage and nanotechnology and seeking ways to accelerate their impact, Argonne has created two new collaborative centers that it is hoping will provide an innovative pathway for business and industry to speed discoveries to market.
2015-10-12
Article
TRB Lightweight Structures recently released an aerospace-grade lightweight honeycomb composite panel designed for interior applications, expanding the application areas for its range of composite flat panels. Recent investments for manufacturing composites include the procurement of a new 3- x 1.5-m autoclave system.
2015-10-12
Article
InCar plus is the most extensive internal R&D project that ThyssenKrupp has ever undertaken, with more than 40 individual solutions geared toward cost-effective vehicle weight reduction without sacrificing performance. Timo Faath, General Manager Technology, ThyssenKrupp Steel North America, Inc., talks about the project and some of its promising technologies.
2015-10-06
Article
LyondellBasell recently acquired SJS Plastiblends Pvt. Ltd., advancing its position in India’s expanding automotive market. LyondellBasell announced in August a definitive agreement to acquire SJS, a polypropylene (PP) compounds manufacturer located in Aurangabad, Maharashtra, India.
2015-09-30
Article
NASA Langley recently tested non-stick wing coatings on Boeing’s ecoDemonstrator 757 that could eventually help aircraft become more fuel efficient by reducing insect residue that creates a surprising amount of drag.
2015-09-29
Article
SAE International’s book, Economics of Composites, captures the state of the composites industry to assist engineering/technical professionals in charting a course for achieving economic success.
2015-09-29
Article
Covestro’s Makrofol SR906 is a polycarbonate film that offers good scratch and weathering resistance, making it suitable for use in automotive instrument panels.
2015-09-23
Article
Baytec AS is a new acoustical spray technology from Covestro, formerly Bayer MaterialScience. There is a patent pending for this innovative new approach, which uses a higher level of sound-blocking fillers than current solutions.
2015-09-11
Article
Endurica targets tire and rubber product developers with new software release. CAE software adds features for the analysis of rolling structures, self-heating, wrinkling, and cavitation.
Viewing 91 to 120 of 1020

Filter

  • Article
    1020