Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 61 to 90 of 1004
2016-05-24
Article
Mazda's new flagship SUV sheds significant weight with a high-strength steel intensive body structure, while introducing a new turbocharged 4-cylinder and improved interior.
2016-05-19
Article
General Motors intends to transform materials-joining technology with a new multi-patented process for spot-welding steel to aluminum
2016-05-19
Article
Sciaky's patented IRISS closed-loop control, which powers its Electron Beam Additive Manufacturing (EBAM) systems, provides consistent process control for part geometry, mechanical properties, microstructure and metal chemistry for large-scale 3D printed parts.
2016-05-14
Article
New organic chemicals are replacing nasty VOC-laden PVC and other materials, say experts at the 2016 WardsAuto Interiors Conference.
2016-05-12
Article
Aerospace technologies provide solutions that help off-highway manufacturers to meet increasing heat-management requirements that stem from stricter emissions standards, explains Bruce Kaplan of Thermal Structures.
2016-05-11
Article
Driven by rising demand for lighter weight components in automotive, heavy-duty trucks and off-highway vehicles, a new wave of technology and operational initiatives is taking center stage in the iron castings industry, explains Grede's Jay Solomond.
2016-04-27
Article
Take-it-to-the-limit testing is typically reserved for vehicle development teams, but Jaguar's route and the sensational topography clearly gave Automotive Engineering good insight into F-Pace's dynamic capabilities and its four-year development.
2016-04-20
Article
Carbodeon has developed a new additive for fluoropolymer coatings, based on its uDiamond NanoDiamond technology. It targets solvent-based coatings used across multiple industries including automotive, aerospace, and industrial.
2016-04-17
Article
GE says the GE9X engine for the Boeing 777X is the largest commercial aircraft engine in the world. It will feature a titanium engine exhaust system from Aircelle.
2016-04-10
Article
The two European companies are collaborating in a study to achieve solutions that could herald a much wider role for plastic composites across transmission applications, including housings and gear teeth.
2016-04-04
Article
This past November Caterpillar opened its new Additive Manufacturing (AM) Factory at its Tech Center in Mossville, IL, to consolidate and expand its 3D printing activities. AM engineer Brittany Hancock recently gave Off-Highway Engineering a tour of the new facility and discussed the company’s current and future plans regarding the use of 3D printing technology.
2016-03-15
Article
Cadillac has aggressively used light materials for its recently-launched new cars, but for the all-new C1 architecture underpinning the XT5 crossover, engineers stuck with steel—and still achieved a major weight reduction.
2016-03-03
Article
SDCmaterials will partner with Car Sound and supply the company with Nano-on-Nano material for its catalytic converters, using substantially less precious metal.
2016-02-12
Article
Cooling circuit components installed by automotive manufacturers consist of a direct composite comprising the PPA VESTAMID HTplus R1033 by the Resource Efficiency segment of Evonik, and a newly developed HNBR elastomer by KACO.
2016-02-04
Article
A University of Delaware research team is developing technologies aimed at ending the reign of high-cost platinum fuel cell stacks.
2016-02-03
Article
Stanyl PA46 from DSM has been chosen for low-friction slide shoes within the timing system of turbocharged gasoline engines.
2016-02-02
Article
High-performance optical liquid silicone rubber from Proto Labs is a transparent, flexible material that can replace glass in many optical applications.
2016-01-25
Article
Researchers at a U.K. university have revealed a "smart" glazing solution that uses nanotechnology to achieve self-cleaning, energy saving, and anti-glare properties.
2016-01-22
Article
UV light solidifies photo-curable resins into complex shapes that are then fired to produce strong, fully dense ceramics.
2016-01-06
Article
The $1 billion venture, funded for five years, will focus on autonomous vehicle technologies, artificial intelligence, materials science, robotics, and more.
2016-01-05
Article
Corning's new glazing material delivers more than five times the strength, pound for pound, of conventional auto glass while offering significant mass reduction and improved optics.
2016-01-03
Article
Magnesium infused with dense silicon carbide nanoparticles anticipated to see much use in airplanes and spacecraft.
2016-01-01
Article
GE’s proprietary scatter|correct technology enhances defect detection and analysis as well as 3D metrology in mobility sectors including aerospace, automotive, and off-highway. It can be applied to high scattering materials such as steel and aluminum, composites, and multi-material samples.
2015-12-28
Article
Next-generation power semiconductors could achieve price parity with silicon in five years, helping to lower the cost of plug-in hybrids and batter-electric vehicles.
2015-12-22
Article
A new test service introduced by Bal Seal Engineering offers verified performance results for the company’s low-friction spring-energized seals used in rotary/face applications.
2015-12-22
Article
Henkel Adhesive Technologies has formulated Gap Filler 3500LV to deliver high thermal conductivity of 3.5 W/m-K and the mechanical property benefits of a silicone, but with low volatility for reduced outgassing.
2015-12-22
Article
Nominations for the fourth annual Altair Enlighten Award are now being accepted, with the 2016 award program including two distinct categories recognizing vehicle lightweighting: full vehicles and modules.
2015-12-04
Article
A lightweight composite material shaped by a unique assembly technique forms a grille opening reinforcement designed specifically for the high-performance 2016 Ford Shelby GT350 Mustang.
2015-12-03
Article
The U.K.-based supplier is working with research group WMG and AGC AeroComposites to develop new composite press-forming processes for automotive and aerospace manufacturers. Patented technology makes it possible to achieve one-minute Takt times for thermoplastic components.
2015-12-01
Article
The 2016 Honda Civic features selectively-tempered “soft zone” technology in the B-pillars and rear frame rails, allowing zones within a single frame piece to have more ductile properties than the surrounding ultra-high-strength hot-stamped steel. The technology minimizes parts count and saves 15.6 lb (7 kg) compared to the previous-generation Civic.
Viewing 61 to 90 of 1004

Filter

  • Article
    1004