Criteria

Text:
Topic:
Content:
Display:

Results

2017-09-19
Article
The International Catalist SuperTruck employed lightweighting strategies to help improve efficiency, and Navistar's focus on weight reduction continues unabated for its SuperTruck II program.
2017-09-19
Article
The project, partially funded by the U.K. government, features a mini-turbine range extender.
2017-09-19
Article
Materion Corp.'s real world testing of new piston ring technology to help reduce downsized engines' emissions enters new phase.
2017-09-13
Article
Advanced Thermal Solutions, Inc.’s (ATS) family of Pin Fin heat sinks is designed as cost-effective solutions for systems with adequate airflow.
2017-09-12
Article
Heavy-duty v-profile clamps from Oetiker operate reliably and safely under extreme conditions of stress, vibration, corrosion and temperature variation.
2017-09-06
Article
Proto Labs features Multi Jet Fusion as part of its suite of 3D printing technologies.
2017-09-03
Article
Researchers from the University of Manchester have designed and fabricated a carbide coating that can withstand the speed and temperature associated with hypersonic travel. To develop the unique coating—a type of ultra-high temperature ceramic (UHTC)—the researchers collaborated with China’s Central South University.
2017-08-29
Article
EpoxySet EC-1030FL is a flexible, two-part epoxy designed to replace silicones for potting, encapsulating and casting applications where temperatures up to 200°C (392°F) are required.
2017-08-27
Article
Engineered Propulsion Systems (EPS) Graflite V8 4.3-L, four-stroke engine is rated at 320 to 420 hp. It is expected to go into production in 2018.
2017-08-22
Article
The wheel rim consists of two aluminium (Al) parts, the inner Al carrier star with the Al brake disk and the outer Al rim well with the tyre. Unlike a conventional disc brake, the New Wheel Concept brake engages the Al disk from the inside. This allows it to have a particularly large diameter, enhancing braking performance.
2017-08-22
Article
At the 2017 IAA, Federal-Mogul Powertrain plans to reveal HTC and TIM solutions to keep engine valves cooler via significant heat transfer.
2017-08-21
Article
Additive manufacturing (AM) is seemingly the cure-all for the manufacture of complex products, but as the potential for AM continues to increase, so too does the cyber target on its back.
2017-08-17
Article
Constellium HSA6 from Constellium N.V. is a new generation of high-strength 6000-series alloys designed to help automakers meet growing demand for lighter-weight vehicles. It is in production for several 2017 and 2018 model year vehicles, including the Mini Countryman.
2017-08-12
Article
Eaton manufactured engine-driven pumps for the first flying MC-21 prototype and supplied additional system sub-components including thermal bypass valves, while Pratt & Whitney supplied its PW1000G GTF engine and Rockwell Collins, Honeywell, and Elbit supplies various avionics systems.
2017-08-12
Article
A Protonex and Insitu development team focused on packaging and integrating existing PEM fuel cell technology with the airframe. The resulting design comprised a redundant double stack design that produces 1.2 kW of power.
2017-08-08
Article
Nanodiamond material specialist Carbodeon has worked with metal finishing specialist CCT Plating to develop a new electroless nickel polytetrafluoroethylene (PTFE) and nanodiamond composite coating.
2017-08-02
Article
The American Chemistry Council and researchers at Michigan State University have demonstrated that a new “reversible” adhesive for multi-material joining actually gets stronger after use and repair/rebonding.
2017-08-01
Article
The prevalence of counterfeits, coupled with the critical nature of aviation components, has spawned an industry of supply chain verification technology and services.
2017-07-31
Article
Chrysler, Toyota, Faurecia and AP&T recognized with the 2017 Altair Enlighten Award for their efforts to reduce vehicle weight.
2017-07-14
Article
Designed in Japan with exterior surfacing finalized at Honda’s California studio, the 2018 Accord is up to 176 lb (89 kg) lighter than the outgoing model, depending on trim level. Key technical features include two new turbocharged gasoline engines, the first use of a 10-speed automatic transaxle (Honda’s own 10AT) in front-drive sedan, and the return to the low-cowl/thin pillar body architecture.
2017-07-14
Article
Conti Excelsus from ContiTech (Louisville, KY) is an extremely flexible high-temperature hose with external reinforcement for truck and off-highway applications.
2017-07-10
Article
Reconfigurable aerodynamic aids are stretching performance-car envelopes in every direction.
2017-06-20
Article
All-new high energy B12 magnets from Bunting Magnetics Co.'s Magnet Applications, Inc. are a major upgrade to its neodymium compression bonded magnet product offerings.
2017-06-19
Article
A multi-material body and chassis and a high-tech, carbon-fiber torque tube bring a new lightweighting award for Mercedes-Benz's AMG GT R supercar.
2017-06-17
Article
Automotive interior components supplier International Automotive Components (IAC) expands as it opens a new regional and global engineering center in Pune, India.
2017-06-10
Article
Metamaterial Technologies looks to enter the solar power market by providing advanced photovoltaic technology to the aerospace and defense industry.
2017-06-10
Article
While 3D printing offers innovative new solutions for the future of aerospace manufacturing, it also enhances traditional aerospace manufacturing processes like investment casting.
2017-06-05
Article
The Crest-to-Crest Wave Spring Series from Smalley, which features the company’s C (imperial) and CM (metric) Series, has been expanded.
2017-05-24
Article
Structural adhesives are gaining applications as engineers employ them with lightweight materials to help achieve a continuous bond for improved vehicle rigidity and other benefits.
2017-05-18
Article
Supplier innovations are central to winning the ongoing battle with NVH—noise, vibration and harshness.

Filter

  • Article
    1032