Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 83
CURRENT
2017-10-13
Standard
AMS6456E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-08-02
Standard
AMS6465E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-05-24
Standard
AIR5742A
The scope of this document is related to the particular needs of oxygen equipment with regards to packaging and transportation. The document provides guidance for handling chemical, gaseous and liquid oxygen equipment. It summarizes national and international regulations to be taken into account for transportation on land, sea and air and provides information on classification of hazardous material. The aim of this document is to summarize information on packaging and transportation of oxygen equipment. Statements and references to regulations cited herein are for information only and should not be considered as interpretation of a law. Processes to maintain cleanliness of components and subassemblies during processing and assembly or storage of work-in-progress are outside the scope of this document. Guidance on this can be obtained from ARP1176.
CURRENT
2017-04-13
Standard
AIR36105B
The present SAE Aerospace Information Report (AIR) provides a list of the main government regulations, SAE and international standards, and standing industry recommendations applying to air cargo unit load devices (pallets, nets, and containers) to be loaded with either baggage or freight on board civil transport aircraft.
CURRENT
2017-03-21
Standard
AS9955A
CURRENT
2017-03-14
Standard
AS36102B
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
CURRENT
2017-01-04
Standard
GEIASTD0003A
This document provides an industry standard for Long Term Storage (LTS) of electronic devices by drawing from the best long term storage practices currently known. LTS is defined as any device storage for more than 12 months but typically allows for much longer (years). While intended to address the storage of unpackaged semiconductors and packaged electronic devices, nothing in this standard precludes the storage of other items under the storage levels defined herein. This standard is not intended to address built-in failure mechanisms (e.g., tin whiskers, plating diffusion, and intermetallics) that would take place regardless of storage conditions
CURRENT
2016-11-22
Standard
AMS2817G
This specification covers procedures which will provide protection of elastomeric seals and seal assemblies such as O-rings, cap seal assemblies, and other designs from contamination by foreign materials and handling / transportation / storage damage prior to installation and ensure positive identification by part number of each piece until it is installed.
CURRENT
2016-10-26
Standard
AMS6469E
This specification covers a low-alloy steel in the form of welding wire.
2016-09-14
WIP Standard
J75
Motor vehicle brake fluid must conform to the requirements of SAE J1703 or J1704, not only when manufactured, but also after extended storage in any commercial packaging container. The purpose of this SAE Information Report is to generate an awareness of the major problems involved in the storage of brake fluids and, to some extent, provide means of circumventing them. It is also the purpose of this document to relate to experience and to test data accumulated and to list certain conclusions which should aid in the proper selection of containers for brake fluid.
CURRENT
2016-08-02
Standard
J1797_201608
This SAE Recommended Practice provides for common battery designs through the description of dimensions, termination, retention, venting system, and other features required in an electric vehicle application. The document does not provide for performance standards. Performance will be addressed by SAE J1798. This document does provide for guidelines in proper packaging of battery modules to meet performance criteria detailed in J1766.
CURRENT
2016-06-06
Standard
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
CURRENT
2016-05-31
Standard
AS6279A
This SAE Aerospace Standard (AS) establishes requirements applicable to metal stock that is ordered and produced in accordance with an Aerospace Material Specification (AMS). Topics include producer requirements, distributor requirements, size and grain orientation nomenclature, and purchaser ordering information to distributors. Requirements of this document have been developed to address titanium and titanium alloys, carbon and alloy steels, and corrosion and heat-resistant alloys.
2016-03-18
WIP Standard
AS6413
This standard is intended to demonstrate and document the control of the potential hazards from lithium cells or batteries (UN 3090 and 3480) when transported as cargo on aircraft. [still need to identify if we are addressing global (external fire) or local (battery internal failures)] This standard addresses the need to control the hazards which might arise from a failure from an individual cell by containing the hazards within the package. This specific hazards addressed within this standard are: • Uncontrolled fire • Rapid overpressure pulse within compartment
CURRENT
2016-02-24
Standard
AS1988B
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extensions.
CURRENT
2015-12-19
Standard
AS6163
This SAE Aerospace Standard (AS) defines the minimum performance standard to demonstrate compliance with the regulatory design, test and operational requirements for a Temperature Controlled Container (TCC).
CURRENT
2015-11-19
Standard
J2224_201511
This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging. 1.1 Purpose The purpose of this document is to provide users of truck, trailer, and bus wheel seals a means of identifying the suppliers of all such components by use of the symbology utilized by the suppliers on their components and packaging.
CURRENT
2014-12-28
Standard
ARP5492A
This SAE Aerospace Recommended Practice (ARP) provides recommendations for aircraft manufacturers and operating carriers about how to establish common information for the use of cargo systems with missing/inoperative restraints. Because of the fact that the certified restriction requirements due to missing/inoperative restraints are dependent of the specific aircraft structure and the system layout of the cargo loading system, this document shall only recommend common layout of information for the users based on the certified data provided to allow for common training, understanding and handling. This shall be used right from the beginning for future aircraft types for certified data.
2014-12-05
WIP Standard
AIR1869D
This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft. This document brings together data concerning the lower deck capacity of wide-body and standard- body airplanes. The information includes airplanes manufactured by Airbus, Boeing, British Aerospace, British Aircraft, Fokker-VFW, Hawker Siddeley, Ilyushin, Lockheed and McDonnell- Douglas.
CURRENT
2014-10-30
Standard
ARP5316D
This SAE Aerospace Recommended Practice (ARP) addresses the general requirements for data recording procedures, packaging, and storing of elastomeric seals and seal assemblies which include an elastomeric element prior to the seal being assembled into hardware components. It applies specifically to those elastomeric seals and seal assemblies packaged shortly after manufacture. The storage period prior to installation of the elastomeric seals and seal assemblies into hardware components is commonly referred to as shelf life. The information contained in this ARP is intended to be utilized by those organizations who do not have specific requirements or recommendations already in place for the control of elastomeric seals and seal assemblies. This ARP can be specified in control, storage, and procurement documents.
CURRENT
2014-04-29
Standard
ARP1967B
This SAE Aerospace Recommended Practice (ARP) recommends design and test criteria for reusable shipping and storage containers for aircraft engines and modules, weapon systems and components, etc. The containers are to provide water-vaporproof and physical protection.
CURRENT
2014-03-25
Standard
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
CURRENT
2014-03-25
Standard
AS832G
This SAE Aerospace Standard (AS) establishes the basic requirements for the specification and testing of air surface (intermodal) 8 ft × 8 ft (2.44 m × 2.44 m) cross-section containers. The basic requirements for the air/surface (intermodal) container are presented in Sections 3 to 6 while the detailed design requirements are in Appendix A. Appendix B describes the sections of other standards that apply to air/surface containers. Appendix C describes uniformity of test apparatus and methods. These appendices shall be referred to for important supplemental requirements and procedures for this document. AS4041 presents the requirements for air mode general purpose containers. Requirements for containers to be transported by rotary-wing aircraft are excluded from this document. NOTE: The essential basic and detail criteria are identified by use of the key word "shall."
CURRENT
2014-03-25
Standard
ARP1523C
This SAE Aerospace Recommended Practice (ARP) delineates the minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers are kept in prime condition during the ground handling and air transportation cycle for a maximum period of 36 h.
CURRENT
2014-03-25
Standard
AIR4899A
The methodology for maximum package size loading is based on a mathematical method allowing the calculation of maximum package size tables. This method does not in principal differentiate between bulk loading and cargo system loading. However, some restrictions have to be considered: Some cargo systems generate pre-determined pallet trajectories. Envelope curves depending on the pallet size and the possible trajectories have to be determined first. Door geometric limitations (with or without cargo loading system) Turning limitations due to weight, load geometry and conveyance capability Securing requirements This document is not intended for airline operational use. It should be used by engineers performing calculations or developing computer programs to produce Maximum Package Size tables specified in AS1825.
CURRENT
2013-04-22
Standard
ARP1383C
This SAE Aerospace Recommended Practice (ARP) defines impulse test procedures that are recommended for hydraulic components.
2013-04-02
WIP Standard
J2579
The purpose of this document is to define design, construction, operational, and maintenance requirements for hydrogen fuel storage and handling systems in on-road vehicles. Performance-based requirements for verification of design prototype and production hydrogen storage and handling systems are also defined in this document. Complementary test protocols (for use in type approval or self-certification) to qualify designs (and/or production) as meeting the specified performance requirements are described. Crashworthiness of hydrogen storage and handling systems is beyond the scope of this document. SAE J2578 includes requirements relating to crashworthiness and vehicle integration for fuel cell vehicles. It defines recommended practices related to the integration of hydrogen storage and handling systems, fuel cell system, and electrical systems into the overall Fuel Cell Vehicle.
CURRENT
2013-03-28
Standard
J2579_201303
The purpose of this document is to define design, construction, operational, and maintenance requirements for hydrogen fuel storage and handling systems in on-road vehicles. Performance-based requirements for verification of design prototype and production hydrogen storage and handling systems are also defined in this document. Complementary test protocols (for use in type approval or self-certification) to qualify designs (and/or production) as meeting the specified performance requirements are described. Crashworthiness of hydrogen storage and handling systems is beyond the scope of this document. SAE J2578 includes requirements relating to crashworthiness and vehicle integration for fuel cell vehicles. It defines recommended practices related to the integration of hydrogen storage and handling systems, fuel cell system, and electrical systems into the overall Fuel Cell Vehicle.
CURRENT
2012-11-21
Standard
ARP36103A
This SAE Aerospace Recommended Practice (ARP) provides the industry agreed methods to keep the center of gravity (C.G.) location of loaded air cargo Unit Load Devices (ULDs) within the maximum horizontal and vertical limits allowed by their airworthiness approval.
Viewing 1 to 30 of 83

Filter

  • Standard
    83