Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 20 of 20
2015-04-15
Book
“Spotlight on Design” features video interviews and case study segments, focusing on the latest technology breakthroughs. Viewers are virtually taken to labs and research centers to learn how design engineers are enhancing product performance/reliability, reducing cost, improving quality, safety or environmental impact, and achieving regulatory compliance. Just how prevalent is the problem of counterfeit electronic parts? What are the consequences of using sub-par components in safety or mission critical systems? The Federal Aviation Administration estimates that 2% of the 26 million airline parts installed each year are counterfeit, accounting for more than 520,000 units, maybe more.
2014-10-22
Book
The new Bosch Automotive Handbook , now in its 9th English edition, has been completely revised and enhanced to include the most recent developments in automotive technology. About 200 specialist authors contributed to this new version of every engineer’s must-have reference. The book's format has been revised: it is now 20 percent longer and wider, as this allows for a larger font size. This makes the texts and graphics easier to read. The index has been strongly expanded to make looking up technical terms easier. The Bosch Automotive Handbook is a best-seller, with a broad global readership. Students of engineering programs consult it, as do researchers and engineers in the automotive industry. Mechanics who are studying to become master craftsmen also use it as a reference work. Experts trust the well-founded and extensive expertise that can be found in the classic. The Bosch Automotive Handbook is widely regarded around the world as a standard work for automotive technology.
2014-10-20
Book
Kirsten M. Koepsel
Electronic parts are used throughout industry to run everyday products, such as cell phones, and also highly technical products, such as aircraft, missiles, and spacecraft. Unlike cell phones, which are often replaced every year, the highly technical products may remain in service from 20 to more than 80 years. But what happens if the original electronic part, with a life cycle of 18 months, is no longer available? Some manufacturers have discovered that they have unwittingly purchased counterfeit ones. Counterfeit Electronic Parts and Their Impact on Supply Chains examines how these items are negatively affecting the aviation, spacecraft, and defense sectors and what can be done about it.
2014-04-01
Book
The Metallic Materials Properties Development and Standardization (MMPDS) Handbook, is an accepted source for metallic material and fastener system allowables recognized by the Federal Aviation Administration (FAA), all departments and agencies of the Department of Defense (DoD), and the National Aeronautics and Space Administration (NASA), within the limitations of the certification requirements of the specific government agency. MMPDS-09 supersedes MMPDS-08and prior editions of the MMPDS as well as all editions of MIL-HDBK-5, Metallic Materials and Elements for Aerospace Vehicle Structures that was maintained by the U.S. Air Force. The last edition, MIL-HDBK-5J was cancelled by the U.S. Air Force in March of 2006.
2014-01-21
Book
With 14 new definitions touching on management, healthcare, startups, manufacturing, and service, the 5th edition of the Lean Lexicon, is the most comprehensive edition yet of the handy and practical glossary for lean thinkers. The latest Lexicon, updated in 2014, contains 60+ graphics and 207 terms from A3 Report to Yokoten. The Lexicon covers such key lean terms as andon, jidoka, kaizen, lean consumption, lean logistics, pull, plan-for- every-part, standardized work, takt time, value-stream mapping, and many more. The new terms are: • Basic Stability • Coaching • Gemba Walk • Huddle • Kamishibai Board • Kata • Leader Standard Work • Lean Management • Lean Management Accounting • Lean Startup • Problem Solving • Service Level Agreement • Training Within Industry (TWI) • Value-stream Improvement
2012-11-09
Book
Michael F. Ashby, David R H Jones
Engineering Materials 2 is one of the leading self-contained texts for more advanced students of materials science and mechanical engineering. The book provides a concise introduction to the microstructures and processing of materials and shows how these are related to the properties required in engineering design. As with previous editions, each chapter is designed to provide the content of one 50-minute lecture. The fourth edition has been updated to include new case studies, more worked examples, links to relevant websites and video clips. Other changes include an increased emphasis on the relationship between structure, processing and properties, and integration of the popular tutorial on phase diagrams into the main text.
2012-04-01
Book
The SAE International Journal of Materials and Manufacturing backfile includes online access to all published papers from 2008 through last year. The SAE International Journal of Materials and Manufacturing publishes authoritative and in-depth research in the areas of materials, design, and manufacturing. In addition to analytical findings, the Journal addresses integration and implementation of scientific and engineering practices that advance the state of the art and benefit society.
2011-01-01
Book
The latest casting and processing technologies have raised the importance of magnesium in the transportation industry. As a structural material with low density and a very high strength-to-weight ratio, magnesium can reduce vehicle weight and, in turn, reduce greenhouse gas emissions and increase fuel economy. This book provides valuable information on: • melt control • process control • casting and solidification • heat treatment • materials selection • various casting processes The 18 chapter authors are world-class scientists, professors and engineers with countless years of industrial and laboratory experience. Each chapter was also reviewed by qualified metallurgists/materials engineers from the metalcasting industry, academia and research laboratories to ensure that only the highest quality information was accepted for publication.
2010-04-30
Book
This set includes: SAE International Journal of Aerospace March 2010 - Volume 2 Issue 1 SAE International Journal of Commercial Vehicles October 2009 - Volume 2, Issue 1 March 2010 - Volume 2, Issue 2 SAE International Journal of Engines October 2009 - Volume 2, Issue 1 March 2010 - Volume 2, Issue 2 SAE International Journal of Fuels and Lubricants October 2009 - Volume 2, Issue 1 March 2010 - Volume 2, Issue 2 SAE International Journal of Materials and Manufacturing October 2009 - Volume 2, Issue 1 March 2010 - Volume 2, Issue 2 SAE International Journal of Passenger Cars - Electronic and Electrical Systems October 2009 - Volume 2, Issue 1 SAE International Journal of Passenger Cars - Mechanical Systems October 2009 - Volume 2, Issue 1 March 2010 - Volume 2, Issue 2
2010-03-01
Book
P. K. Mallick
Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, Design and Manufacturing for Lightweight Vehicles makes it easier for engineers to learn about the materials being considered for lightweight automobiles, and also compare their characteristics and properties. Part one of this title discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminum alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures.
2009-03-30
Book
John Shook, Toshiko Narusawa
What should you do first when starting to implement lean manufacturing? What comes next, then next? With the raft of information now available about lean principles, it’s easy to get confused. Kaizen Express clarifies the process using a rapid, nonstop style to explain the essential elements of the Toyota Production System (TPS) in a logical implementation sequence. This succinct but comprehensive back-to-basics book offers lean novices and veterans alike a comprehensive primer on lean principles and implementation that returns to fundamentals and stresses the importance of learning by doing at the individual and team levels. “It’s easy to forget the fundamentals while pursuing advanced methods,” writes Jim Womack, LEI founder and chairman, in the Foreword. “I constantly encounter firms focusing on high-level issues of lean management, strategy, and corporate culture that have completely ignored creating a solid foundation at the level where the real work is done.”
2007-04-10
Book
Jwo Pan, Sing C. Tang
Functioning as an introduction to modern mechanics principles and various applications that deal with the science, mathematics and technical aspects of sheet metal forming, Mechanics Modeling of Sheet Metal Forming details theoretically sound formulations based on principles of continuum mechanics for finite or large deformation, which can then be implemented into simulation codes. The forming processes of complex panels by computer codes, in addition to extensive practical examples, are recreated throughout the many chapters of this book in order to benefit practicing engineers by helping them better understand the output of simulation software.
2005-01-03
Book
Stuart Cole
This third edition of Applied Transport Economics has been completely revised and updated to cover the latest developments and thinking in transport economics. Professor Stuart Cole examines the application of economics techniques first to commercial transport operations, and second to public policy issues such as investment, integrated transport and competition, and third to the role of transport in its wider economic context. The style and approach, which proved so popular in the first two editions has been retained. This approach provides a transport economics text book for managers who are not familiar with economics techniques, students preparing for examinations in transport and other areas of business and public policy where an applied approach to economics is required, and economists entering the transport field.
Viewing 1 to 20 of 20

    Filter

    • Book
      20