Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 151 to 180 of 1424
2014-12-12
Article
Al-Fe Heat Treating adds glycol quenching to its aluminum heat treat services.
2014-12-03
Article
SAE International’s new book, Counterfeit Electronic Parts and Their Impact on Supply Chains, examines how counterfeit parts are negatively affecting the aviation, spacecraft, and defense sectors and what can be done about it.
2014-12-01
Article
Dry drilling of composite-Ti stack-ups via CO2 avoids the problems associated with liquid coolants used in fuselage hole drilling, while delivering benefits in productivity, tool life, and hole quality.
2014-11-26
Article
High-tech design causes time to remanufacture engines to nearly triple and adds to cost, while used engines remain a competitive factor. However, Purdue University data shows remanufacturing is far more energy efficient than installing a new powerplant.
2014-11-25
Article
The SXUVPS4 multi-element photo detector from Opto Diode has a 5 mm² active area in a quadrant configuration.
2014-11-25
Article
The YASDA YMC 430 Ver. II micro machining center from Methods Machine Tools, Inc. is suitable for the ultra-precise manufacturing and high surface finishes required on small, complex features in components and dies or molds.
2014-11-25
Article
3D Systems has developed its fastest fab-grade selective laser sintering system yet, the ProX 500 Plus.
2014-11-20
Article
Bridgestone Americas announced on Nov. 18 the opening of its off-highway radial tire plant in Aiken County, SC—the first plant of its kind for Bridgestone outside of Japan, according to a company spokesperson. 
2014-11-18
Article
Scientists at Fraunhofer have developed a high-resolution magnetic line camera to measure magnetic fields in real time, which is particularly useful for quality assurance during the manufacture of magnets.
2014-11-18
Article
Potential exists for more efficient re-use of rare earth elements, Purdue professor asserts. Regardless of choice, original component design should be engineered for dismantling to enhance end-of-life recovery, he tells Automotive Aftermarket Industry Week forum in Las Vegas.
2014-11-17
Article
Composite supplier Toray Industries signed an agreement to expand its current contract for the Boeing 787 Dreamliner to include the 777X wings. The addition of the 777X to the current 787 contract represents a significant increase in the material provided to Boeing by Toray.
2014-10-29
Article
NASA and Aerojet Rocketdyne have successfully completed a series of hot-fire tests on an advanced rocket-engine thrust chamber assembly using copper alloy additive manufacturing technology. Full-scale demonstration is the next step in the technology’s development path.
2014-10-29
Article
Fiat Chrysler Automobiles N.V. (FCA) on Oct. 29 announced its intention to sell its Ferrari S.p.A unit. The separation will be effected through a public offering of FCA's interest in Ferrari equal to 10% of Ferrari's outstanding shares and a distribution of FCA's remaining Ferrari shares to FCA shareholders.
2014-10-28
Article
Lexus tops Consumer Reports' annual reliability survey, with the three Toyota brands (including Scion) finishing in the top 10. Asian automakers hold 7 of the tops 10 spots. Fiat finishes last among the 28 brands included in the survey, with sister brands Dodge, Ram, and Jeep, occupying the last 4 spots.
2014-10-24
Article
Boeing on Oct. 21 celebrated the groundbreaking of its new 777X Composite Wing Center at the Everett, WA, campus. Permitting for the new 1 million-ft² facility was completed seven weeks earlier than anticipated, allowing for an accelerated start to construction.
2014-10-22
Article
WABCO Holdings Inc. recently opened its fifth manufacturing facility in India, located in Lucknow. The new plant will supply advanced braking technologies, including antilock braking systems (ABS), actuators, and a range of braking valves, for multiple global heavy-truck and bus manufacturers operating in India.
2014-10-21
Article
Novelis has officially opened what it claims is China's first plant dedicated to the production of heat-treated aluminum automotive sheet, making the company the only one producing automotive aluminum sheet in all three of the world's major automobile producing regions: Asia, Europe, and North America.
2014-10-20
Article
Automakers are racing to cut the cost of lightweight materials that help boost fuel efficiency. In this week's SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at the U.S. and German automakers' push for low-cost carbon fiber.
2014-10-20
Article
GP:50 Corporation LTD’s Model 188/288/388 miniature flush diaphragm pressure transducer series’ unique flush diaphragm design makes possible accurate pressure measurements of high-viscosity fluids, even within high shock and vibration environments, without port plugging and clogging.
2014-10-17
Article
The OM-WLS-TEMP series wireless USB 2.0 full-speed temperature input module from Omega is fully compatible with both USB 1.1 and 2.0.
2014-10-08
Article
Chrysler Group LLC on Oct. 7 announced two personnel moves involving manufacturing operations. Brian Harlow was appointed President–Head of NAFTA Manufacturing, replacing Mauro Pino, who was named Head of Manufacturing for the Latin America region.
2014-10-03
Article
Polymer composites reinforced with the "wonder material" graphene could cut structural weight by a third or more, researchers claim.
2014-09-30
Article
Brose is manufacturing different vehicle mechatronic systems from its recently renovated New Boston, MI, plant.
2014-09-30
Article
The CNC system solution IndraMotion MTX from Rexroth has enhanced functionalities through Open Core Engineering.
2014-09-30
Article
European researchers examine simulation-based solutions for the manufacture of large-scale, liquid-resin-infusion composite substructures for aircraft and possibly ground vehicles.
2014-09-12
Article
High-performance metamaterial antennas could be compact, lightweight, conformable, and stealthy.
2014-09-08
Article
The Walmart Advanced Vehicle Experience is a prototype tractor-trailer developed to demonstrate the possibilities of future transport, and the truck is not the only place where innovation reigns. The trailer body is built almost exclusively with carbon fiber, and it incorporates other technologies such as advanced adhesives and low-profile LED lighting.
2014-09-05
Article
Days before Tesla on Sept. 4 announced it has selected Nevada as the state in which it will build a large "Gigafactory' battery plant, Lux Research opined that the savings in lithium-ion battery costs owing to high-volume efficiencies will not be as much as the automaker expects it to be.
2014-08-25
Article
Coriolis Composites and SAFRAN Aircelle worked together on a thrust reverser component demonstrator made with carbon-fiber-reinforced plastic (CFRP) material and an AFP process. This component is an inner fixed structure, made of two monolithic carbon skins and a core.
2014-08-20
Article
KUKA Aerospace, a developer of automated manufacturing systems for aircraft manufacturing and assembly, is locating its first U.S. facility outside of Michigan in Everett, WA. The 29,000-ft² center will provide a service and maintenance hub close to KUKA Aerospace customers on the West Coast and help support current expansion.
Viewing 151 to 180 of 1424

Filter

  • Article
    1424