Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 91 to 120 of 1396
2015-04-13
Article
Halla Visteon Climate Control Corp. (HVCC) recently began production at its new facility in Sanand, in the state of Gujarat, India. The full-line supplier of automotive thermal management solutions is using the Gujarat facility to support its growing business with global vehicle manufacturers and to cater to the requirements of OEMs in the state of Gujarat and western India.
2015-04-06
Article
Turbine blades in TiAl are about half the weight of comparable nickel-alloy components but boast the same reliability and durability. The high aluminum content also makes the material resistant to oxidation and corrosion.
2015-04-02
Article
The company expects to better support the use of additive manufacturing, or 3D printing, by releasing new OptiStruct solver capabilities for topology optimization. The company claims this new technology is the first tool developed specifically for designers of lattice structures.
2015-04-01
Article
New water-rejecting coating explored by chemists at University College London and other universities makes for tough self-cleaning surfaces that might work on motor vehicles.
2015-04-01
Article
To equip its flagship sedan for the challenge, Cadillac designers and engineers have built the CT6 on a unique vehicle architecture, an aluminum-intensive body structure that is fully one-third steel. Twenty-one patents are pending for the new full-size, rear-wheel-drive, transverse-engine configuration, a variation of GM’s Omega II platform.
2015-03-31
Article
The Senvol Database is a searchable database for industrial 3-D printing machines and materials.
2015-03-24
Article
Aerojet Rocketdyne recently completed a series of hot-fire tests of additive manufactured components for its AR1 booster engine at its Sacramento test facility.
2015-03-24
Article
The EFC 3600 variable frequency drive from Bosch Rexroth offers a solution for efficient process control application.
2015-03-24
Article
NanoSteel expands its additive manufacturing material capabilities to support metal 3D printing of complex high hardness parts.
2015-03-23
Article
The company has expanded its additive manufacturing material capabilities to support metal 3-D printing of complex high-hardness parts and the ability to customize properties layer-by-layer through “gradient material design.”
2015-03-16
Article
Old World Labs introduces two 3D printers in its MC Series, delivering precision and accuracy with improved resolution.
2015-03-12
Article
Delo partners with Bollhoff to develop the Onsert fastening method, which securely connects elements and provides fast joining of removable screw connections using light-cured adhesive.
2015-03-11
Article
Novel aluminum-rich steel alloy could find structural use in road vehicles and even aircraft.
2015-02-25
Article
The inventors of semiconductor chips or electronic parts most likely never imagined that over 50 years later, the aviation, space, and defense industries would be faced with the availability or proliferation of counterfeit electronic parts in their supply chains.
2015-02-25
Article
Delcam’s 2015 version of its PowerINSPECT inspection system includes automatic collision avoidance, faster import of large CAD files, quicker preparation of longer inspection reports, and improved display of results from point-cloud data, plus many other customer-requested enhancements.
2015-02-19
Article
While the newer fiber laser and solid-state lasers offer distinct advantages, it is not time to close the book on the venerable CO2 laser, especially for high-volume, precision powertrain components. An attachment from Advanced Nozzles eliminates expensive helium, making the cost-benefit ratio even better for precision CO2 welding applications.
2015-02-19
Article
Conventional CT scanners cannot accommodate long or bulky aircraft components.
2015-02-16
Article
Kistler offers a joining system comprising maXYmos numeric control (NC), the IndraDrive servo amplifier, and NC joining modules monitors and controls.
2015-02-10
Article
EOS and MTU Aero Engines are cooperating to apply new quality-assurance technology to direct metal laser sintering. The strategic partnership is expected to help advance EOS’ existing control and monitoring processes and further promote product quality in AM series production.
2015-02-09
Article
Cadillac's new CT6, set for release in the fourth quarter of 2015, will be built with various types of advanced and lightweight materials and manufactured using a combination of joining techniques, a first for any GM model.
2015-02-02
Article
Its new platform has fully independent suspension and two four-wheel-drive systems. The Select-Terrain system included with 4WD has an rock-climbing mode added for off-road enhanced Trailhawk.
2015-01-30
Article
New approach to HVAC case design incorporates an optimized center section and side sections that can be shaped and sized for specific performance and packaging. Blower fan remains in separate case and a dual-fan design is available for more precise airflow management between outside air and recirculating air.
2015-01-20
Article
The air-cooled 3U nine-slot D2D chassis from Curtiss-Wright comes in a 3/4 ATR tall long format.
2015-01-20
Article
The No. 1031 is a 650°F electrically heated walk-in oven from Grieve, currently used at a customer location for curing composite components.
2015-01-15
Article
Oak Ridge National Laboratory (ORNL) had its latest 3-D printing technology at the North American International Auto Show in Detroit, showing off a replica of a classic Shelby Cobra made via the rapidly propagating technology.
2015-01-14
Article
Car put on display is based on electrical and mechanical components from a Renault electric vehicle "city car" simply as a proof of process. Much testing and refinement remain. Help is being provided by Oak Ridge National Laboratory and SABIC.
2015-01-12
Article
Oxford Performance Materials launched in December the first two grades of its OXFAB 3-D printing technology—OXFAB-N and OXFAB-ESD—suitable for aerospace and other industrial markets, including transportation, energy, and semiconductor applications. The company claims this is the first time PEKK is being used for 3-D printing in aerospace and industrial applications.
2015-01-05
Article
Treating molten metal with ultrasound is cleaner and more efficient than using argon rotary degassing to produce high-quality castings, according to scientists at Brunel University London. Cost reduction is another benefit, demonstrated in the research team's pilot-scale trials.
2014-12-31
Article
NASA has formed unfunded partnerships with four U.S. companies to develop new space capabilities available to the government and other customers. The Collaborations for Commercial Space Capabilities (CCSC) initiative is designed to advance private-sector development of integrated space capabilities through access to NASA's spaceflight resources and ensure emerging products or services are commercially available to government and non-government customers within approximately the next five years.
2014-12-22
Article
New adjustable angle heads from BENZ help manufacturers improve their machining and milling operations by enhancing productivity and efficiency.
Viewing 91 to 120 of 1396

Filter

  • Article
    1396