Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 61 to 90 of 97
2016-02-05
Article
The £20 million consortium project will help pave the way for future generation EV batteries.
2016-02-02
Article
High-performance optical liquid silicone rubber from Proto Labs is a transparent, flexible material that can replace glass in many optical applications.
2016-01-22
Article
UV light solidifies photo-curable resins into complex shapes that are then fired to produce strong, fully dense ceramics.
2016-01-05
Article
Magneti Marelli, through its Magneti Marelli Powertrain India Private Ltd. joint venture with Maruti Suzuki and Suzuki Motor Co., recently inaugurated a new industrial site for the production of automated manual transmissions (AMTs) for automobiles.
2016-01-03
Article
Purdue University has developed a new system that allows a 3D printer to produce functioning products with enclosed electronic and motorized components and customized devices such as a computer mouse molded to a user's hand.
2016-01-01
Article
GE’s proprietary scatter|correct technology enhances defect detection and analysis as well as 3D metrology in mobility sectors including aerospace, automotive, and off-highway. It can be applied to high scattering materials such as steel and aluminum, composites, and multi-material samples.
2015-12-28
Article
Next-generation power semiconductors could achieve price parity with silicon in five years, helping to lower the cost of plug-in hybrids and batter-electric vehicles.
2015-12-22
Article
Nominations for the fourth annual Altair Enlighten Award are now being accepted, with the 2016 award program including two distinct categories recognizing vehicle lightweighting: full vehicles and modules.
2015-12-03
Article
The U.K.-based supplier is working with research group WMG and AGC AeroComposites to develop new composite press-forming processes for automotive and aerospace manufacturers. Patented technology makes it possible to achieve one-minute Takt times for thermoplastic components.
2015-12-01
Article
The 2016 Honda Civic features selectively-tempered “soft zone” technology in the B-pillars and rear frame rails, allowing zones within a single frame piece to have more ductile properties than the surrounding ultra-high-strength hot-stamped steel. The technology minimizes parts count and saves 15.6 lb (7 kg) compared to the previous-generation Civic.
2015-11-09
Article
Design and build time of the UAV is said to be reduced 50%, and its is use of lightweight materials the enabler to reaching speeds over 150 mph.
2015-10-27
Article
Prima Power has introduced the Laserdyne 430 Versa 3D fiber laser system with third-generation BeamDirector, designed for the typical laser processing needs of tool rooms, model shops, and R&D centers of manufacturers.
2015-10-27
Article
New series has an optimized internal geometry and a new glass-fiber-reinforced, prong-type, roller centered PEEK cage.
2015-10-26
Article
The German equipment supplier’s new PCHflex technology reportedly allows economical production of hot-stamped parts with high output performance, part quality, and maximum availability. A U.S. car manufacturer has already placed an order with Schuler for four production lines to manufacture lightweight parts using PCHflex, which is also suitable for producing parts on heavy-duty vehicles.
2015-10-21
Article
The 2016 SUV is nearly 300 lb (136 kg) lighter than its predecessor, yet maintains its high safety standard thanks to a new-generation ACE body structure and the available Honda Sensing suite of advanced safety and driver-assistance technologies. Honda also debuted its digital product development-and-manufacturing process with the new Pilot.
2015-10-19
Article
Ricardo introduces a unique service to re-industrialize complex service parts with critical inventory shortages, leveraging expertise in low-volume and high-complexity powertrain sourcing.
2015-10-12
Article
TRB Lightweight Structures recently released an aerospace-grade lightweight honeycomb composite panel designed for interior applications, expanding the application areas for its range of composite flat panels. Recent investments for manufacturing composites include the procurement of a new 3- x 1.5-m autoclave system.
2015-09-29
Article
SAE International’s book, Economics of Composites, captures the state of the composites industry to assist engineering/technical professionals in charting a course for achieving economic success.
2015-09-23
Article
Infor Product Lifecycle Management (PLM) Accelerate, powered by Aras, is a new PLM solution designed for automotive, industrial manufacturing, high-tech, and aerospace and defense customers.
2015-09-21
Article
Aras Flow features a new Windows 8 mobile tablet app that helps companies accelerate product realization with visual collaboration.
2015-08-27
Article
The wing design includes several streamlined features, in particular droop-nose leading edge devices and new adaptive dropped-hinge flaps, which increase the jetliner’s efficiency at low speeds.
2015-08-25
Article
Semi-solid casting is a near-net shape casting process that is capable of producing extremely high-quality castings. It differs from all other casting processes as it does not use fully liquid metal to produce the castings, instead using a feed material that is preferably about 50% solid and 50% liquid.
2015-08-24
Article
Ready to install, electromechanical heavy-duty cylinders from Rexroth enable freely programmable motion sequences, even at high forces.
2015-08-11
Article
For a window into how 3D printing is revolutionizing manufacturing, look no further than the aerospace industry.
2015-07-27
Article
Walther Trowal’s new continuous feed tumblast machines have been specially adapted for shot blasting of light metals like aluminum and magnesium.
2015-07-27
Article
Coldwater Machine’s new SpotMeld system is based on Refill Friction Stir Spot Weld technology. The system enables spot welding of aluminum (1000-7000 series), magnesium, non-ferrous, and dissimilar sheet materials.
2015-07-21
Article
Small robots are beginning to handle tasks inside automotive production facilities that require human-like dexterity.
2015-07-17
Article
Mercedes-Benz has expanded its local production portfolio at its Pune, India, assembly plant to six model series with the recent addition of the GLA compact SUV. The other models include S-, E-, and C-Class sedans as well as the GL and M-Class SUVs.
2015-07-16
Article
Snecma is preparing its supply chain and industrial capabilities for an unprecedented production ramp-up of its LEAP engine, already considered the best selling new engine ever a year before entry into service.
2015-07-14
Article
Ford is jumping on the additive manufacturing bandwagon, teaming up with a startup that claims its 3D manufacturing system makes parts 25 to 100 times faster than conventional 3D printing systems. The automaker is using additive processes to make tooling and may eventually use them to make production parts.
Viewing 61 to 90 of 97

Filter

  • Article
    1407